PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

[kingarthur]

Anyone else getting a error with An unknown science pack?
Its inhibiting the research of Bobs modals.

unknown key "item-name.science-pack=0"
Im not entirely sure where it came from, It only showed up in a new game. Wasn't in my old game.

Should only show up if you have aaii on.

[kingarthur]

mod prtals working again. pushed an update out.

[Delanii]

Maybe it would be better to use some sort of tracker for this stuff?

what do you mean by tracker. like use the issues board on github?

Yes. Or the discussions on mod portal at least. In the mod description you suggest to write everything here.

Ya I should probably update that. Was written back when the mod portal didnt do notifications

Hello kingarthur,
seeing this and also newest discussion on modportal, noting also that mod portal sometimes "bugs off," I would like to ask you for clarification, where do you prefer anyone ask for compatibilities, features, report bugs and maybe even suggest solutions for bugs in effect.
Maybe even writing that in first post here and on mod portal.
I dont want to "clatter" this thread with asking, beging, reporting bugs and such (which I have already done plenty ) if there is better spot to go to do that.
Thank you for letting us know.
Regards, Delanii

[kingarthur]

Maybe it would be better to use some sort of tracker for this stuff?

what do you mean by tracker. like use the issues board on github?

Yes. Or the discussions on mod portal at least. In the mod description you suggest to write everything here.

Ya I should probably update that. Was written back when the mod portal didnt do notifications

Hello kingarthur,
seeing this and also newest discussion on modportal, noting also that mod portal sometimes "bugs off," I would like to ask you for clarification, where do you prefer anyone ask for compatibilities, features, report bugs and maybe even suggest solutions for bugs in effect.
Maybe even writing that in first post here and on mod portal.
I dont want to "clatter" this thread with asking, beging, reporting bugs and such (which I have already done plenty ) if there is better spot to go to do that.
Thank you for letting us know.
Regards, Delanii

Honestly if it's a bug or something needing fixed probably the issues page on github or the mod portal. Its easier to keep things organized that way. And make sure I fix things as theres no good way to keep track of anything on the forum pages.

https://github.com/kingarthur91/PyCoalT ... is%3Aissue

Somebody let me know if you can access that. It should be public

[YunoAloe]

Github is perfect, but having 0.0.33 in the mod name is sort of disorienting. Would be much better if you put this link onto the mod portal and updated the mod description (everything on the "information" page).

[infantryman4life]

yo i just updated pycoaltbaA and after the update im getting:

Failed to load mode: _ _PyCoalTBaA_ _/data-final-fixes.lua:296:attempt to index field "omnirec-base-6-extraction-2" (a nil value) stack traceback:

_ _PyCoalTBaA_ _/data-final-fixes.lua:296: in main chunk

mods to be disabled:

PyCoalTBaA

thanks,
Robert

[jpom]

On Linux, PyCoalTBaA fails to load for me (i.e., Factorio fails to start) with an error message that's about a random science pack, or occasionally about "stuffs".

The fix, I found, is to comment out some log statements in overrides.findtechswithpack in functions/functions.lua:

Code: Select all

function overrides.findtechswithpack(scipack)
	for t,tech in pairs(data.raw.technology) do
	--COMMENT OUT log(tech.name)
		for p, pack in pairs(tech.unit.ingredients) do
		--COMMENT OUT log(serpent.block(pack))
			if pack[1] == scipack then
				--COMMENT OUT log(pack[1] .. " " .. scipack)
				--for s,sp in pairs(techlist) do
					--log(serpent.block(sp))
					--if sp ~= tech.name then
						--COMMENT OUT log("stuffs")
						table.insert(techlist,tech.name)
					--end
				--end
			end
		end
	end
	
log(serpent.block(techlist))

end

I'm not sure why the log statements make a difference, but they do.

[kingarthur]

On Linux, PyCoalTBaA fails to load for me (i.e., Factorio fails to start) with an error message that's about a random science pack, or occasionally about "stuffs".

The fix, I found, is to comment out some log statements in overrides.findtechswithpack in functions/functions.lua:

Code: Select all

function overrides.findtechswithpack(scipack)
	for t,tech in pairs(data.raw.technology) do
	--COMMENT OUT log(tech.name)
		for p, pack in pairs(tech.unit.ingredients) do
		--COMMENT OUT log(serpent.block(pack))
			if pack[1] == scipack then
				--COMMENT OUT log(pack[1] .. " " .. scipack)
				--for s,sp in pairs(techlist) do
					--log(serpent.block(sp))
					--if sp ~= tech.name then
						--COMMENT OUT log("stuffs")
						table.insert(techlist,tech.name)
					--end
				--end
			end
		end
	end
	
log(serpent.block(techlist))

end

I'm not sure why the log statements make a difference, but they do.

they shouldn't effect it so idk. also they should have already been commented out but i must have missed those ones. will fix. thanks

[kingarthur]

yo i just updated pycoaltbaA and after the update im getting:

Failed to load mode: _ _PyCoalTBaA_ _/data-final-fixes.lua:296:attempt to index field "omnirec-base-6-extraction-2" (a nil value) stack traceback:

_ _PyCoalTBaA_ _/data-final-fixes.lua:296: in main chunk

mods to be disabled:

PyCoalTBaA

thanks,
Robert

will be fixed

[jpom]

On Linux, PyCoalTBaA fails to load for me (i.e., Factorio fails to start) with an error message that's about a random science pack, or occasionally about "stuffs".

The fix, I found, is to comment out some log statements in overrides.findtechswithpack in functions/functions.lua:

Code: Select all

function overrides.findtechswithpack(scipack)
	for t,tech in pairs(data.raw.technology) do
	--COMMENT OUT log(tech.name)
		for p, pack in pairs(tech.unit.ingredients) do
		--COMMENT OUT log(serpent.block(pack))
			if pack[1] == scipack then
				--COMMENT OUT log(pack[1] .. " " .. scipack)
				--for s,sp in pairs(techlist) do
					--log(serpent.block(sp))
					--if sp ~= tech.name then
						--COMMENT OUT log("stuffs")
						table.insert(techlist,tech.name)
					--end
				--end
			end
		end
	end
	
log(serpent.block(techlist))

end

I'm not sure why the log statements make a difference, but they do.

they shouldn't effect it so idk. also they should have already been commented out but i must have missed those ones. will fix. thanks

Thanks so much for the mod and the fix. My friends and I are having a great game. And yeah, log statements really shouldn't effect behavior. Nevertheless...

[Szentigrade]

i am running omni / bobs / angels and py and with omnipermute it takes forever to load took an hour

[katalex]

After last update of Bobs mods...

Снимок экрана от 2019-05-21 22-35-21.png (59.43 KiB) Viewed 6229 times

[kingarthur]

After last update of Bobs mods...
Снимок экрана от 2019-05-21 22-35-21.png

God damn it Bob.

Thanks I'll get it fixed

[trailertrash13]

1st thanks for your compatibility patch. so im running full angels, bobs,and py. not pyro but i an running ptht and pyph and so far there things show up in fnei but you cant craft them and that is, titanium tetracloride, carbon block, and belts. and i think they are all from pyph. any ideas?

mod list
"name": "base",
"name": "Aircraft",
"name": "alien-biomes",
"name": "angelsaddons-petrotrain",
"name": "angelsaddons-pressuretanks",
"name": "angelsaddons-smeltingtrain",
"name": "angelsaddons-warehouses",
"name": "angelsbioprocessing",
"name": "angelspetrochem",
"name": "angelsrefining",
"name": "angelssmelting",
"name": "auto-research",
"name": "Big-Monsters",
"name": "BigBags",
"name": "BigDrills",
"name": "bobassembly",
"name": "bobelectronics",
"name": "bobenemies",
"name": "bobequipment",
"name": "bobgreenhouse",
"name": "bobinserters",
"name": "boblibrary",
"name": "boblocale",
"name": "boblogistics",
"name": "bobmining",
"name": "bobmodules",
"name": "bobores",
"name": "bobplates",
"name": "bobpower",
"name": "bobrevamp",
"name": "bobtech",
"name": "bobvehicleequipment",
"name": "bobwarfare",
"name": "ClosestFirst",
"name": "Clowns-Nuclear",
"name": "CompressedFluids",
"name": "Crafting_Speed_Research",
"name": "creative-mod",
"name": "easy-logistics",
"name": "Enhanced_Map_Colors",
"name": "even-distribution",
"name": "EvoGUI",
"name": "Explosive Termites",
"name": "FARL",
"name": "Flow Control",
"name": "FNEI",
"name": "Full_Power_Coverage_017",
"name": "helmod",
"name": "Inventory Sensor",
"name": "LoaderRedux",
"name": "LogisticTrainNetwork",
"name": "LTN_Content_Reader",
"name": "LTN_Tracker",
"name": "MaxRateCalculator",
"name": "miniloader",
"name": "More-Exoskeletons",
"name": "nixie-tubes",
"name": "OpteraLib",
"name": "ore-eraser",
"name": "OutpostPlanner",
"name": "PlannerCore",
"name": "power-grid-comb",
"name": "py-quick-start",
"name": "pycoalprocessing",
"name": "PyCoalTBaA",
"name": "pyfusionenergy",
"name": "pyhightech",
"name": "pyindustry",
"name": "pypetroleumhandling",
"name": "QuickStartTBaA",
"name": "radarplus for rso",
"name": "railloader",
"name": "Rampant",
"name": "Realistic_Electric_Trains",
"name": "rso-mod",
"name": "ShinyAngelGFX",
"name": "ShinyBobGFX",
"name": "ShinyIcons",
"name": "SpaceMod",
"name": "Squeak Through",
"name": "stdlib",
"name": "StoneWaterWell",
"name": "textplates",
"name": "TheFatController",
"name": "TimeTools",
"name": "TogglePeacefulMode",
"name": "upgrade-planner-next",
"name": "VehicleSnap",
"name": "WaiTex_Full",
"name": "Warehousing",
"name": "Waterfill_v17",
"name": "what-is-it-really-used-for",
"name": "what-is-missing",
"name": "YARM",
"name": "yi_engines",
"name": "yi_railway",
"name": "Yuoki",
"name": "ZoomPresets",
"name": "z_yira_american",
"name": "z_yira_UP",
"name": "z_yira_yuokirails",



edit 2 id i up date to pyph 1.1.7 i get this error
https://imgur.com/ctxbUy6

[YunoAloe]

there things show up in fnei but you cant craft them and that is, titanium tetracloride, carbon block, and belts. and i think they are all from pyph. any ideas?

Oh finally someone else noticing this. I have this too. Except that I disabled pyPH right away when I saw belt being not craftable, so don't know about the rest, but it is logical that there should be more. I have full ABPy set.

[aklesey1]

ill look into it. proably fine for pyrawores but need to make sure it doesnt break any of the others

I'm asking only for modpack with aai industry + all py mods, what can be broken i donno, i'm asking for a little changes, if these changes couldn't be possible just tell about it

Have u some time to look for compatibility AAI Industry with py mods kingarthur?
Main issue is begining of factory starting with glass and sand technologies from AAI Industry

[kingarthur]

ill look into it. proably fine for pyrawores but need to make sure it doesnt break any of the others

I'm asking only for modpack with aai industry + all py mods, what can be broken i donno, i'm asking for a little changes, if these changes couldn't be possible just tell about it

Have u some time to look for compatibility AAI Industry with py mods kingarthur?
Main issue is begining of factory starting with glass and sand technologies from AAI Industry

Not yet. Fixed a few other issues. Got to figure out why sp0 is being added to things it's not supposed to then I'll look into it

[Irsmert]

Having issues getting to 165 degree steam with an updated Py suite + AAI + Amator's with PyCoalTBaA and a dozen or two other assorted simpler mods. (Stock) Boilers only output 120 degree steam, presumably from Amator's power overhaul, as Py coke is unuseable for steam production. Any chance of a quick and easy fix or should I just mod Py steam input requirements to be 120 degrees again?

Aside from that everything seems to be working remarkably smoothly.

[AmatorPhasma]

Having issues getting to 165 degree steam with an updated Py suite + AAI + Amator's with PyCoalTBaA and a dozen or two other assorted simpler mods. (Stock) Boilers only output 120 degree steam, presumably from Amator's power overhaul, as Py coke is unuseable for steam production. Any chance of a quick and easy fix or should I just mod Py steam input requirements to be 120 degrees again?

Aside from that everything seems to be working remarkably smoothly.

Hi, this will be fixed in the next Version,
I already had a report for this -> https://mods.factorio.com/mod/apm_lib/d ... 003ea77e81
A fix is already in my repo -> https://gitlab.com/AmatorPhasma/apm_fac ... 5c5acc893b

The update will go online this night, but I don't have an exact time for you.

[kingarthur]

Having issues getting to 165 degree steam with an updated Py suite + AAI + Amator's with PyCoalTBaA and a dozen or two other assorted simpler mods. (Stock) Boilers only output 120 degree steam, presumably from Amator's power overhaul, as Py coke is unuseable for steam production. Any chance of a quick and easy fix or should I just mod Py steam input requirements to be 120 degrees again?

Aside from that everything seems to be working remarkably smoothly.

Hi, this will be fixed in the next Version,
I already had a report for this -> https://mods.factorio.com/mod/apm_lib/d ... 003ea77e81
A fix is already in my repo -> https://gitlab.com/AmatorPhasma/apm_fac ... 5c5acc893b

The update will go online this night, but I don't have an exact time for you.

yay me i problem i dont have to fix. not sure if you have noticed but we just added a oil/ fluid based boiler to pyph recently that will also probably need adjusted if youve changed the steam temps as it was set to 165 degrees