[MOD 0.17.x] BeltSorter 0.6.3
-
- Manual Inserter
- Posts: 2
- Joined: Sat Feb 03, 2018 1:42 pm
- Contact:
Re: [MOD 0.16.x] BeltSorter 0.5.4
IT was actually the .19 update and not the .20 update that broke it.
Re: [MOD 0.15.x] BeltSorter 0.4.1
I love belt sorter for it's pyrpose as a small workhorse!!!MAup wrote:I saw someone requesting the ability to put two or more sorters next to eachother, and you told them it would be a too complex project.
Wouldn't that work kind of how underground belt works?
Anyway i was wondering if you were rethinking of adding this solution or if a 2x2 belt sorter were in your mind in any way?
Regards
MAup
But big jobs require bigger tools....
So for those I use storehouse/warehouses fitted with loaders set to output properly to it's attached belt..
Warehouses tend to be 6x6 which allows for some massive sorting...and high input rates with plenty of buffering...
although depending on the task..almost any large chest will work.
- Attachments
-
- New Bitmap Image (2).jpg (172.35 KiB) Viewed 9611 times
Re: [MOD 0.16.x] BeltSorter 0.5.4
Your time is APPRECIATED!!!!judos wrote:Fix 0.5.4
- fix entity system crash when beltSorter is removed.
That sounds small but took me a couple of hours to find.
Re: [MOD 0.16.x] BeltSorter 0.5.4
Recently this mod is causing my game to crash any time I try to open power armor, with the following error message:
Error while running event beltSorter::on_tick (ID 0)
LuaEquipmentGrid doesn't contain key name.
stack traceback:
__beltSorter__/libs/control/gui.lua:96: in function 'playerOpenGui'
__beltSorter__/libs/control/gui.lua:126: in function 'gui_tick'
__beltSorter__/control.lua:49: in function <__beltSorter__/control.lua:47>
In this case it's bugging out with the power armor given by the TinyStart mod, but it also occurs with vanilla power armor.
Error while running event beltSorter::on_tick (ID 0)
LuaEquipmentGrid doesn't contain key name.
stack traceback:
__beltSorter__/libs/control/gui.lua:96: in function 'playerOpenGui'
__beltSorter__/libs/control/gui.lua:126: in function 'gui_tick'
__beltSorter__/control.lua:49: in function <__beltSorter__/control.lua:47>
In this case it's bugging out with the power armor given by the TinyStart mod, but it also occurs with vanilla power armor.
Re: [MOD 0.16.x] BeltSorter 0.5.4
It changed with 0.16.40 I guess.
"Fixed that LuaPlayer::opened wouldn't return the opened equipment grid. "
I was able to fix it locally by changing on libs/control/gui.lua, L125
if openGui == nil and openEntity ~= nil then
playerOpenGui(player,playerData,openEntity)
end
to
if openGui == nil and playerData.openEntity ~= nil then
playerOpenGui(player,playerData,playerData.openEntity)
end
"Fixed that LuaPlayer::opened wouldn't return the opened equipment grid. "
I was able to fix it locally by changing on libs/control/gui.lua, L125
if openGui == nil and openEntity ~= nil then
playerOpenGui(player,playerData,openEntity)
end
to
if openGui == nil and playerData.openEntity ~= nil then
playerOpenGui(player,playerData,playerData.openEntity)
end
Re: [MOD 0.16.x] BeltSorter 0.5.4
Made the same change - fixed it for me too.tt_ich wrote:I was able to fix it locally by changing on libs/control/gui.lua, L125
if openGui == nil and openEntity ~= nil then
playerOpenGui(player,playerData,openEntity)
end
to
if openGui == nil and playerData.openEntity ~= nil then
playerOpenGui(player,playerData,playerData.openEntity)
end
Re: [MOD 0.16.x] BeltSorter 0.5.4
While this did fix the crash for me, it also made the gui not show up at all when opening the sorter, rendering the whole mod effectively useless. I recommend Cordina90's fork on github. This seems to work for me.tt_ich wrote:It changed with 0.16.40 I guess.
"Fixed that LuaPlayer::opened wouldn't return the opened equipment grid. "
I was able to fix it locally by changing on libs/control/gui.lua, L125
if openGui == nil and openEntity ~= nil then
playerOpenGui(player,playerData,openEntity)
end
to
if openGui == nil and playerData.openEntity ~= nil then
playerOpenGui(player,playerData,playerData.openEntity)
end
Or if github is too confusing here's just the fixing edit.
Re: [MOD 0.16.x] BeltSorter 0.5.4
jokru wrote:While this did fix the crash for me, it also made the gui not show up at all when opening the sorter, rendering the whole mod effectively useless. I recommend Cordina90's fork on github. This seems to work for me.tt_ich wrote:It changed with 0.16.40 I guess.
"Fixed that LuaPlayer::opened wouldn't return the opened equipment grid. "
I was able to fix it locally by changing on libs/control/gui.lua, L125
if openGui == nil and openEntity ~= nil then
playerOpenGui(player,playerData,openEntity)
end
to
if openGui == nil and playerData.openEntity ~= nil then
playerOpenGui(player,playerData,playerData.openEntity)
end
Or if github is too confusing here's just the fixing edit.
That is true: BeltSorter-GUI was broken.
Correction only from line 116 was sufficient!
Re: [MOD 0.16.x] BeltSorter 0.5.4
Why doesnt it work?
The Input should come from right or right and south.
the output should be coal on north and iron on west.
???
The Input should come from right or right and south.
the output should be coal on north and iron on west.
???
- Attachments
-
- screenshot-tick-7058675.png (3.33 MiB) Viewed 9381 times
Re: [MOD 0.16.x] BeltSorter 0.5.4
Why not just use the filter splitter function?Labor3 wrote:Why doesnt it work?
The Input should come from right or right and south.
the output should be coal on north and iron on west.
???
Re: [MOD 0.16.x] BeltSorter 0.5.4
You have to put the hooks by rightclick for right/left options directly next to your selection.Labor3 wrote:Why doesnt it work?
The Input should come from right or right and south.
the output should be coal on north and iron on west.
???
Re: [MOD 0.16.x] BeltSorter 0.5.4
8Zn wrote:You have to put the hooks by rightclick for right/left options directly next to your selection.Labor3 wrote:Why doesnt it work?
The Input should come from right or right and south.
the output should be coal on north and iron on west.
???
Thanks!
I was leftcklicking it and the hooks dissapeared immediately... >_<
Didn't know you had to rightclick it.
Re: [MOD 0.16.x] BeltSorter 0.5.5
Version 0.5.5 was just released, this should fix errors with opening the grid of Power Armor and unselectable lanes
Re: [MOD 0.16.x] BeltSorter 0.5.4
Love the mod, just hankering for additional tier support for Bob's!
Re: [MOD 0.16.x] BeltSorter 0.5.4
Hello. I have a found a bug.
I only placed one sorter in the world. Nevertheless, it displays 2 times in the power management.
I only placed one sorter in the world. Nevertheless, it displays 2 times in the power management.
Pictures
Re: [MOD 0.16.x] BeltSorter 0.5.4
Will this be updated for 0.17 anytime soon?
Re: [MOD 0.16.x] BeltSorter 0.5.4
I found the mod very useful and I can make the fork for 0.17.
Re: [MOD 0.17.x] BeltSorter 0.6.2
Hi there,
I didn't manage to visit factorio for a while, but now I found some time again so I updated some small things
Changes 0.6.1
- Add thumbnail for the beautiful mod portal
- Fix priority button width for belt-sorter-3, add label for translation "Make this priority __1__"
- Added support for all loaders which are 1x1. Note however that the throughput is only half of the normal belt because these loaders are only half a belt if you look closer.
Fixes and compatibility 0.6.2
- Fix update speed to match new speed of belts (factorio 0.17) - throughput looks smoother now
- Add Turbo and Ultimate BeltSorter with speed of 60, 75 Items/s (If bobs-logistics or UltimateBelts is installed)
- Add migration such that bobs' logistics-4 and ultimateBelts' ultra fast logistics unlock these beltSorter
Fixes and compatibility 0.6.3
- Fix beltSorters didn't use any energy at all (except if condition is set), did you actually notice this earlier?
- Above also fixes an issue with Realistic Power mod making beltSorters not work in general
- Add support for krastorio, advanced-logistics unlocks Turbo BeltSorter
I didn't manage to visit factorio for a while, but now I found some time again so I updated some small things
Changes 0.6.1
- Add thumbnail for the beautiful mod portal
- Fix priority button width for belt-sorter-3, add label for translation "Make this priority __1__"
- Added support for all loaders which are 1x1. Note however that the throughput is only half of the normal belt because these loaders are only half a belt if you look closer.
Fixes and compatibility 0.6.2
- Fix update speed to match new speed of belts (factorio 0.17) - throughput looks smoother now
- Add Turbo and Ultimate BeltSorter with speed of 60, 75 Items/s (If bobs-logistics or UltimateBelts is installed)
- Add migration such that bobs' logistics-4 and ultimateBelts' ultra fast logistics unlock these beltSorter
Fixes and compatibility 0.6.3
- Fix beltSorters didn't use any energy at all (except if condition is set), did you actually notice this earlier?
- Above also fixes an issue with Realistic Power mod making beltSorters not work in general
- Add support for krastorio, advanced-logistics unlocks Turbo BeltSorter
-
- Burner Inserter
- Posts: 5
- Joined: Mon Jun 10, 2019 10:16 pm
- Contact:
Re: [MOD 0.17.x] BeltSorter 0.6.3
Is it possible for you to fix this ( Tightly connected sorters) ?
https://mods.factorio.com/mod/beltSorte ... 000b1928e2
I don't care about rotation but tightly connected sorters is a MUST!
My design doesn't work...
https://mods.factorio.com/mod/beltSorte ... 000b1928e2
I don't care about rotation but tightly connected sorters is a MUST!
My design doesn't work...