Version 0.17.1
Re: Version 0.17.1
Just as an FYI ( I'll re-download ), when clicking on the update with the updater, the update does NOT download, the game just restarts and asks me to re-download again.
Re: Version 0.17.1
See my earlier reply, is it the same error? I can choose not to update, and game loads to Main Menu. However, choosing to update results in error shown.
Re: Version 0.17.1
Just loving this. Welcome all 0.17 users.
-
- Manual Inserter
- Posts: 1
- Joined: Tue Feb 26, 2019 11:54 pm
- Contact:
Re: Version 0.17.1
When trying to save a game I get "File __base__/campaigns/beta/description.json not found (The system cannot find the path specified.)"
-
- Manual Inserter
- Posts: 3
- Joined: Fri Jan 11, 2019 7:14 pm
- Contact:
Re: Version 0.17.1
Hey y'all,
First off, great work dev team . I've played for a couple of hours now and didn't have any major problems.
I do have one question though, regarding the new shortcut bar: most of the options are greyed out for me. All I can do is toggle and enable/disable alt-mode.
I started a new game, so is this a bug, or do the extra features get unlocked by tech?
First off, great work dev team . I've played for a couple of hours now and didn't have any major problems.
I do have one question though, regarding the new shortcut bar: most of the options are greyed out for me. All I can do is toggle and enable/disable alt-mode.
I started a new game, so is this a bug, or do the extra features get unlocked by tech?
-
- Manual Inserter
- Posts: 1
- Joined: Thu Mar 23, 2017 6:22 pm
- Contact:
Re: Version 0.17.1
I opted into Steam beta (edit: windows), upon launching 0.17.1, I get a message:
Error loading mods
Failed to load mods: Error while running setup for map gen preset "death-world": Diffusion ratio must be <= 0.25
When i press "Disable mods", nothing changes, on restart too.
Edit: I've figured it out, but now on my mac it doesn't start at all
Error loading mods
Failed to load mods: Error while running setup for map gen preset "death-world": Diffusion ratio must be <= 0.25
When i press "Disable mods", nothing changes, on restart too.
Edit: I've figured it out, but now on my mac it doesn't start at all
Last edited by PikePegasus on Wed Feb 27, 2019 2:27 am, edited 1 time in total.
Re: Version 0.17.1
No, I get no screen-visible error at all, I didn't dig into the logs, if it happens on the next build I'll dig much further into it.
-
- Filter Inserter
- Posts: 670
- Joined: Sat Jun 06, 2015 2:23 am
- Contact:
Re: Version 0.17.1
So far mostly good. There are two big issues however:
1) you can't select a blueprint in a blueprint book anymore (new game without any blueprint research if that makes a difference). You used to be able to shift and scroll to select the active blueprint in a book. Now you can't. I can scroll to a blueprint while placing but then when I put the blueprint book back in my hotbar (press Q), the next time I pick up the blueprint book, it has the first blueprint selected. This is extremely annoying. The only workaround is to manually take out each blueprint I want to use from the books and use them individually thus defeating the purpose of the blueprint books.
2) there seems to be no way to re-take / update an existing blueprint without completely deleting it along with it's name and icons. With all the blueprint updates, it would be great to update a blueprint without and keep the old icons and name.
A side note: I can't place a deconstruction planner in my hotbar, it just disappears. Same with the upgrade planner. Likely this is because the research for automated construction isn't complete yet, but this should not limit you from placing them in your hotbar. Especially if you can keep your hotbar between different saves.
1) you can't select a blueprint in a blueprint book anymore (new game without any blueprint research if that makes a difference). You used to be able to shift and scroll to select the active blueprint in a book. Now you can't. I can scroll to a blueprint while placing but then when I put the blueprint book back in my hotbar (press Q), the next time I pick up the blueprint book, it has the first blueprint selected. This is extremely annoying. The only workaround is to manually take out each blueprint I want to use from the books and use them individually thus defeating the purpose of the blueprint books.
2) there seems to be no way to re-take / update an existing blueprint without completely deleting it along with it's name and icons. With all the blueprint updates, it would be great to update a blueprint without and keep the old icons and name.
A side note: I can't place a deconstruction planner in my hotbar, it just disappears. Same with the upgrade planner. Likely this is because the research for automated construction isn't complete yet, but this should not limit you from placing them in your hotbar. Especially if you can keep your hotbar between different saves.
Re: Version 0.17.1
If accurate, that will be quite annoying -- shift scrolling through a blueprint book is something I do often.factoriouzr wrote: ↑Wed Feb 27, 2019 12:16 am
1) you can't select a blueprint in a blueprint book anymore (new game without any blueprint research if that makes a difference). You used to be able to shift and scroll to select the active blueprint in a book. Now you can't.
Professional Curmudgeon since 1988.
- BlueTemplar
- Smart Inserter
- Posts: 2914
- Joined: Fri Jun 08, 2018 2:16 pm
- Contact:
Re: Version 0.17.1
Ok, so, do you think - to take an extreme example - that if Netflix applied to that 8-45€/month plan to host their *entire* movie library there, for *all* their users to download, Google wouldn't mind ?nuhll wrote: ↑Tue Feb 26, 2019 10:12 pmThey say its on their official page its unlimited if you have atleast 5 users which pay for 8€ a month. So in worst case around 45€ a month for unlimited space and bandwidth.BlueTemplar wrote: ↑Tue Feb 26, 2019 10:08 pmI'm pretty sure it's only "unlimited" if you're not a heavy user...nuhll wrote: ↑Tue Feb 26, 2019 10:05 pmOr just Google drive. 8€/month unlimited space/bw.BlueTemplar wrote: ↑Tue Feb 26, 2019 10:03 pmIn a better world, Wube could use torrents, and save on bandwidth costs...
Currently you can just buy one account for 8€ a month and also get unlimited bw and space.
Currently at 8tb and steady getting more.. (there are ppl with over 100TB) so its definitly working 100%. Some say the soft limit is at 150TB, but even if that is true, that is probably far more then anyone of us ever needs...
P.S.: Also, (over-)reliance on the GAFAM is bad...
BobDiggity (mod-scenario-pack)
-
- Burner Inserter
- Posts: 9
- Joined: Tue Feb 26, 2019 8:27 pm
- Contact:
Re: Version 0.17.1
Netflix is probably not even that much.BlueTemplar wrote: ↑Wed Feb 27, 2019 12:44 amOk, so, do you think - to take an extreme example - that if Netflix applied to that 8-45€/month plan to host their *entire* movie library there, for *all* their users to download, Google wouldn't mind ?nuhll wrote: ↑Tue Feb 26, 2019 10:12 pmThey say its on their official page its unlimited if you have atleast 5 users which pay for 8€ a month. So in worst case around 45€ a month for unlimited space and bandwidth.BlueTemplar wrote: ↑Tue Feb 26, 2019 10:08 pmI'm pretty sure it's only "unlimited" if you're not a heavy user...nuhll wrote: ↑Tue Feb 26, 2019 10:05 pmOr just Google drive. 8€/month unlimited space/bw.BlueTemplar wrote: ↑Tue Feb 26, 2019 10:03 pmIn a better world, Wube could use torrents, and save on bandwidth costs...
Currently you can just buy one account for 8€ a month and also get unlimited bw and space.
Currently at 8tb and steady getting more.. (there are ppl with over 100TB) so its definitly working 100%. Some say the soft limit is at 150TB, but even if that is true, that is probably far more then anyone of us ever needs...
P.S.: Also, (over-)reliance on the GAFAM is bad...
But yes, thats what google is selling, and if any provider is able to make it, then its google...?
There are even smaller companies (for more money tho) which adverts like that.
What is GAFAM?
-
- Inserter
- Posts: 39
- Joined: Sat Aug 27, 2016 1:39 pm
- Contact:
Re: Version 0.17.1
GAFAM is an acronym for the five most popular U.S. tech stocks: Google, Apple, Facebook, Amazon and Microsoft.
Re: Version 0.17.1
Huh, didn't know that one. Knew FANG -- Facebook, Apple, Netflix, Googlecybersteel8 wrote: ↑Wed Feb 27, 2019 2:05 amGAFAM is an acronym for the five most popular U.S. tech stocks: Google, Apple, Facebook, Amazon and Microsoft.
Professional Curmudgeon since 1988.
-
- Inserter
- Posts: 22
- Joined: Mon Sep 17, 2018 10:42 am
- Contact:
Re: Version 0.17.1
You guys are awesome, 0.17 is great... having fun
Re: Version 0.17.1
It's late and I have little time (so I could not read this thread).
So here is some probably redundant feedback on the tutorial campaign.
After using the crummy iron automation example, I dismantled it to transfer the objects to the copper field. Apparently I was meant to leave them standing, because the game advised me to place an inserter right where the iron belt used to be..
The arrows for "loader" look bad. (Known issue.)
The damaged reactor mouseoverr text is not displayed properly (full screen mode, 1.9k res). "Containing a li(..)" - a what battery?
The feeder is called a loader?
And the feeder keeps using up my copper, after it allready has the requested ammount. So it is possible for a player to run out of copper ore before finishing this task.
When researching, there is no indication the the game is paused, and the research screen needs to be closed for the research to start. I expect many confused people trying to find the button they need to press to start, only to be successful when they give up and leave the menu.
Pipette ("q") on water does not bring up the off shore pump (as I remember it beeing announced).
Compilatron is doing a good job - I allready hate them. I tried to wall in (with a wall) the little menace, and failed..
There is no brownout warning, noone tells the player to increase steam power generation. Took me a while to notice why everything was running so slow.
So here is some probably redundant feedback on the tutorial campaign.
After using the crummy iron automation example, I dismantled it to transfer the objects to the copper field. Apparently I was meant to leave them standing, because the game advised me to place an inserter right where the iron belt used to be..
The damaged reactor mouseoverr text is not displayed properly (full screen mode, 1.9k res). "Containing a li(..)" - a what battery?
The feeder is called a loader?
And the feeder keeps using up my copper, after it allready has the requested ammount. So it is possible for a player to run out of copper ore before finishing this task.
When researching, there is no indication the the game is paused, and the research screen needs to be closed for the research to start. I expect many confused people trying to find the button they need to press to start, only to be successful when they give up and leave the menu.
Pipette ("q") on water does not bring up the off shore pump (as I remember it beeing announced).
Compilatron is doing a good job - I allready hate them. I tried to wall in (with a wall) the little menace, and failed..
There is no brownout warning, noone tells the player to increase steam power generation. Took me a while to notice why everything was running so slow.
Last edited by Cisz on Wed Feb 27, 2019 3:02 am, edited 1 time in total.
Re: Version 0.17.1
I don't know if there's a feedback thread around somewhere, so I'll just leave this here: The new campaign is HARD. Really, really hard.
Specifically, I've launched many, many rockets, but I lost due to bugs invading from both sides in huge masses.
My wife has played with me through quite a few rocket launches. She's no master automater, but she can generally put things together. She got to approximately the same point in the campaign, but couldn't get anything connected because of constant biter attacks.
Suggestion: If the player is not doing well, detect that and back off a bit on the biters.
Specifically, I've launched many, many rockets, but I lost due to bugs invading from both sides in huge masses.
My wife has played with me through quite a few rocket launches. She's no master automater, but she can generally put things together. She got to approximately the same point in the campaign, but couldn't get anything connected because of constant biter attacks.
Suggestion: If the player is not doing well, detect that and back off a bit on the biters.
- BlueTemplar
- Smart Inserter
- Posts: 2914
- Joined: Fri Jun 08, 2018 2:16 pm
- Contact:
Re: Version 0.17.1
Why would that be an issue ?
It gives the plates back to your inventory afterward.
I found that to be a nice touch !)
BobDiggity (mod-scenario-pack)