PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch
Re: PyCoalTBaA or the PyCoal Angels Patch
Thanks kingarthur
Need some fixes with replacing methane gas to residual gas from angel's petrochem in recipes for sulfur and oil recipes - bcuz Angel's Petrochem was updated
Anhother question is - how to hide recipes for advanced foundry? They were pretty annoying! Why i'm they appears before i'm unlocking "coal processing 3" technology??? Its silly.... how to force them appear only after researching "coal processing 3" technology? More logical i think
Idea for balance between iron and copper consumption in aai industry - with these motors we must spent more iron then copper, and its strange that the yellow inserter don't need 1 circuit to craft, but in vanilla its need 1 circuit
So i think we can add this 1 circuit back to recipe for yellow inserter
Don't mean to sound whimsical but still I must admit that still have annoying issues with aai industries - getting coke on fist stages is some bcuz we can't craft pipes, can't even make simple iron pipe and i don't talk about copper pipes for destructive distillation column and about first circuits
Our solutions:
1) Add many iron and copper pipes to start
2) Add many circuits to start
3) Or ask author of aai industry to rework his mod for pycp - Earendel did too serious changes to vanilla, but his principle have hard collisions with pycp its too sad - we have to invent so-called crutches from start to create vision that the lone colonist crushed on planet to start making bright new future for mankind!!!
Need some fixes with replacing methane gas to residual gas from angel's petrochem in recipes for sulfur and oil recipes - bcuz Angel's Petrochem was updated
Anhother question is - how to hide recipes for advanced foundry? They were pretty annoying! Why i'm they appears before i'm unlocking "coal processing 3" technology??? Its silly.... how to force them appear only after researching "coal processing 3" technology? More logical i think
Idea for balance between iron and copper consumption in aai industry - with these motors we must spent more iron then copper, and its strange that the yellow inserter don't need 1 circuit to craft, but in vanilla its need 1 circuit
So i think we can add this 1 circuit back to recipe for yellow inserter
Don't mean to sound whimsical but still I must admit that still have annoying issues with aai industries - getting coke on fist stages is some bcuz we can't craft pipes, can't even make simple iron pipe and i don't talk about copper pipes for destructive distillation column and about first circuits
Our solutions:
1) Add many iron and copper pipes to start
2) Add many circuits to start
3) Or ask author of aai industry to rework his mod for pycp - Earendel did too serious changes to vanilla, but his principle have hard collisions with pycp its too sad - we have to invent so-called crutches from start to create vision that the lone colonist crushed on planet to start making bright new future for mankind!!!
Last edited by aklesey1 on Sun Dec 24, 2017 9:45 am, edited 3 times in total.
Nickname on ModPortal - Naron79
Re: PyCoalTBaA or the PyCoal Angels Patch
My another question is how to adapt Ground Borer to extract 6 angel's raw ore using coal gas?
Step 1:
Remove recipes which allow to extract natural ores from bob's mods and pyfe mod
Step 2:
Add recipes which will allow to extract 6 angel's ores
Step 3:
Now all balanced to play with angel's ore, Enjoy
Another ideas
1) Replace common water to purified water as end product in recipe with cleaning tailings water
2) Use purified water instead of common water in recipes for quenching tower
3) Use purified water instead of common water in recipe for boric acid
Step 1:
Remove recipes which allow to extract natural ores from bob's mods and pyfe mod
Step 2:
Add recipes which will allow to extract 6 angel's ores
Step 3:
Now all balanced to play with angel's ore, Enjoy
Another ideas
1) Replace common water to purified water as end product in recipe with cleaning tailings water
2) Use purified water instead of common water in recipes for quenching tower
3) Use purified water instead of common water in recipe for boric acid
Nickname on ModPortal - Naron79
-
- Smart Inserter
- Posts: 1463
- Joined: Sun Jun 15, 2014 11:39 am
- Contact:
Re: PyCoalTBaA or the PyCoal Angels Patch
I haven't actually play or even really looked at what aai- industry had changed. im thinking i need to actually go thru and make some game-balance changes if its causing that many issues. if Earendel removed the circuit from the first inserter theres a reason for it. ill look into things before i just change it and possibly break something.
thats as simple as just overriding the ground-bore recipes outputs. i hadnt changed it as i feel that for the work it takes to get them it makes a nice extra way to get bobs ores. ill look into making a setting toggle to switch it to giving angels oresaklesey1 wrote:My another question is how to adapt Ground Borer to extract 6 angel's raw ore using coal gas?
Step 1:
Remove recipes which allow to extract natural ores from bob's mods and pyfe
Step 2:
Add recipes which will allow to extract 6 angel's ores
Step 3:
Now all balanced to play with angel's ore, Enjoy
Re: PyCoalTBaA or the PyCoal Angels Patch
About petroleum and residual gases - i did that change by my hands right in angel's petrochem - thais file calls - "perochem-global-override"
Nickname on ModPortal - Naron79
Re: PyCoalTBaA or the PyCoal Angels Patch
Awesome mod! I've been trying to play around with it. I got two remarks:
1: I probably miss something obvious, but coke is necessary for Fawogae Substrate and thus SP1, but coke is also locked behind Coal Processing 1 (the pycoal tech). Am I the only one with this issue?
2: On the AAI industries discussion. Since pyCoal SP1 is very complex and has a lot of prerequisite techs if AAI industry is on, it's probably easiest to introduce a Science Pack Zero or something like that. A SP which is like the vanilla SP1 or close to it, requiring only iron and copper. And replace the SP requirements of all AAI industry early techs with this Science Pack Zero, before reaching everything necessary for SP1 (pumps, pipes, early electricity, basic circuit boards, belts, etc.). That might be out of the scope for this mod, though. Still, it would be cool.
1: I probably miss something obvious, but coke is necessary for Fawogae Substrate and thus SP1, but coke is also locked behind Coal Processing 1 (the pycoal tech). Am I the only one with this issue?
2: On the AAI industries discussion. Since pyCoal SP1 is very complex and has a lot of prerequisite techs if AAI industry is on, it's probably easiest to introduce a Science Pack Zero or something like that. A SP which is like the vanilla SP1 or close to it, requiring only iron and copper. And replace the SP requirements of all AAI industry early techs with this Science Pack Zero, before reaching everything necessary for SP1 (pumps, pipes, early electricity, basic circuit boards, belts, etc.). That might be out of the scope for this mod, though. Still, it would be cool.
- ZombieMooose
- Filter Inserter
- Posts: 289
- Joined: Mon Feb 09, 2015 7:23 am
- Contact:
Re: PyCoalTBaA or the PyCoal Angels Patch
So I'm trying to play with a little modpack, and whenever I install the PyCoal mods (including Fusion and Industry) with your mod and angels installed there's a crash to desktop. It doesn't even give me the option to disable the mods.
It creates a dump file and closes the game.
this is my mod list: https://snag.gy/xXZoqW.jpg
and this is the error: https://snag.gy/3ESrmG.jpg
it doesn't do it when the the PY mods are uninstalled.
I dunno what's causing it, but I figured you might have an idea, and I'll let Py know too.
It creates a dump file and closes the game.
this is my mod list: https://snag.gy/xXZoqW.jpg
and this is the error: https://snag.gy/3ESrmG.jpg
it doesn't do it when the the PY mods are uninstalled.
I dunno what's causing it, but I figured you might have an idea, and I'll let Py know too.
"men will literally learn everything about ancient Rome instead of going to therapy"
Re: PyCoalTBaA or the PyCoal Angels Patch
I decided to take the initiative and implement my own idea. Here the mod on the mod portal:
AAI Industry Science pack 0:
https://mods.factorio.com/mods/romtos/aai-industry-sp0
Edit: my first issue still remains of course (coke is necessary for Fawogae Substrate and thus SP1, but coke is also locked behind Coal Processing 1). Unless I make CP1 a SP0 tech.
AAI Industry Science pack 0:
https://mods.factorio.com/mods/romtos/aai-industry-sp0
Edit: my first issue still remains of course (coke is necessary for Fawogae Substrate and thus SP1, but coke is also locked behind Coal Processing 1). Unless I make CP1 a SP0 tech.
-
- Smart Inserter
- Posts: 1463
- Joined: Sun Jun 15, 2014 11:39 am
- Contact:
Re: PyCoalTBaA or the PyCoal Angels Patch
You should be able to make coke in the destructive distillation column from coal. Which you need anyway for the coal gas to make glassromtos wrote: 1: I probably miss something obvious, but coke is necessary for Fawogae Substrate and thus SP1, but coke is also locked behind Coal Processing 1 (the pycoal tech). Am I the only one with this issue?
Re: PyCoalTBaA or the PyCoal Angels Patch
Hmmm you can make glass out of coal gas?kingarthur wrote:You should be able to make coke in the destructive distillation column from coal. Which you need anyway for the coal gas to make glassromtos wrote: 1: I probably miss something obvious, but coke is necessary for Fawogae Substrate and thus SP1, but coke is also locked behind Coal Processing 1 (the pycoal tech). Am I the only one with this issue?
I really need to install and use NEI. I've been using tons of quartz for gas since the sand way seems really slow.
Re: PyCoalTBaA or the PyCoal Angels Patch
Yep, you're right. Thanks.kingarthur wrote:You should be able to make coke in the destructive distillation column from coal. Which you need anyway for the coal gas to make glassromtos wrote: 1: I probably miss something obvious, but coke is necessary for Fawogae Substrate and thus SP1, but coke is also locked behind Coal Processing 1 (the pycoal tech). Am I the only one with this issue?
You can also make glass from sand, which is gained from the washer. So I didn't look into coal gas.
-
- Smart Inserter
- Posts: 1463
- Joined: Sun Jun 15, 2014 11:39 am
- Contact:
Re: PyCoalTBaA or the PyCoal Angels Patch
yes you can make it with sand crushed bobmonium and coal gas at start. and can unlock the first mech refining that gives the option to sort the bobmonium for tin and silicon. allowing you to use the slightly more efficient silicon glass recipeorzelek wrote:Hmmm you can make glass out of coal gas?kingarthur wrote:You should be able to make coke in the destructive distillation column from coal. Which you need anyway for the coal gas to make glassromtos wrote: 1: I probably miss something obvious, but coke is necessary for Fawogae Substrate and thus SP1, but coke is also locked behind Coal Processing 1 (the pycoal tech). Am I the only one with this issue?
I really need to install and use NEI. I've been using tons of quartz for gas since the sand way seems really slow.
Re: PyCoalTBaA or the PyCoal Angels Patch
Tnaks! All worksromtos wrote:Awesome mod! I've been trying to play around with it. I got two remarks:
1: I probably miss something obvious, but coke is necessary for Fawogae Substrate and thus SP1, but coke is also locked behind Coal Processing 1 (the pycoal tech). Am I the only one with this issue?
2: On the AAI industries discussion. Since pyCoal SP1 is very complex and has a lot of prerequisite techs if AAI industry is on, it's probably easiest to introduce a Science Pack Zero or something like that. A SP which is like the vanilla SP1 or close to it, requiring only iron and copper. And replace the SP requirements of all AAI industry early techs with this Science Pack Zero, before reaching everything necessary for SP1 (pumps, pipes, early electricity, basic circuit boards, belts, etc.). That might be out of the scope for this mod, though. Still, it would be cool.
U know its some sad that we have to invent all sorts of simplification and to resort to such conventions, although I must admit that the SP 0 looks logical , we might even think of a more laconic the icon for it
What do u think about these ideas people?aklesey1 wrote: Another ideas
1) Replace common water to purified water as end product in recipe with cleaning tailings water
2) Use purified water instead of common water in recipes for quenching tower
3) Use purified water instead of common water in recipe for boric acid
Nickname on ModPortal - Naron79
Re: PyCoalTBaA or the PyCoal Angels Patch
romtos, ty for ur work, i tried ur mod 0.0.3 minutes ago... and I sit and think how to make it more compatible with omni-mods - 2 resources from PYFE now generating like when its generating with bob's - volcanic pipe and regolite mine
Nickname on ModPortal - Naron79
Re: PyCoalTBaA or the PyCoal Angels Patch
I'm not exactly sure what you mean. I also want to avoid taking kingarthur's thread off-topic.aklesey1 wrote:romtos, ty for ur work, i tried ur mod 0.0.3 minutes ago... and I sit and think how to make it more compatible with omni-mods - 2 resources from PYFE now generating like when its generating with bob's - volcanic pipe and regolite mine
Could you use the discussion page of my mod? https://mods.factorio.com/mods/romtos/a ... discussion
You can otherwise also find me on the Factorio Discord.
Re: PyCoalTBaA or the PyCoal Angels Patch
Hey people, i think we need to reduce amount of sulfur which we can get from angel's recipes bcuz:
Amount of sulfur dioxide from sulfur:
1) In bob mods - 5 sulfur = 50 sulfur dioxide
2) In angel mods - 1 sulfur = 50 sulfur dioxide
I think amount of sulfur must be reduced by 5 times
PYCP is oriented on bob's recipe with 5 sulfur = 50 sulfur dioxide so with recipes from we getting excess of sulfur fro angel's recipes in angel's refining
I suggest to reduce amount of sulfur from:
1) Sulfuric waste water
2) Recipe with hydrogen sulfide
3) Recipe - sodium sulfate - 6 sodium sulfate = 4 sodium + 2 sulfur
How to write this overwriting script? We need boblirary mod or angel's functions?
Amount of sulfur dioxide from sulfur:
1) In bob mods - 5 sulfur = 50 sulfur dioxide
2) In angel mods - 1 sulfur = 50 sulfur dioxide
I think amount of sulfur must be reduced by 5 times
PYCP is oriented on bob's recipe with 5 sulfur = 50 sulfur dioxide so with recipes from we getting excess of sulfur fro angel's recipes in angel's refining
I suggest to reduce amount of sulfur from:
1) Sulfuric waste water
2) Recipe with hydrogen sulfide
3) Recipe - sodium sulfate - 6 sodium sulfate = 4 sodium + 2 sulfur
How to write this overwriting script? We need boblirary mod or angel's functions?
Nickname on ModPortal - Naron79
-
- Inserter
- Posts: 34
- Joined: Fri Feb 10, 2017 9:20 am
- Contact:
Re: PyCoalTBaA or the PyCoal Angels Patch
don't you need all that sulphur for angels refining and mining infinite ores? maybe a better solution would be to increase the amount of sulphur that pycoal useses
Re: PyCoalTBaA or the PyCoal Angels Patch
There're 2 variants to choose but i want to respect pyanodon's work bcuz bob's mods is base for PYCP for first with his new science packs system and after that is angel's mods goingadamcirillo wrote:don't you need all that sulphur for angels refining and mining infinite ores? maybe a better solution would be to increase the amount of sulphur that pycoal useses
Pls read this
Feel the difference?Amount of sulfur dioxide from sulfur:
1) In bob mods - 5 sulfur = 50 sulfur dioxide
2) In angel mods - 1 sulfur = 50 sulfur dioxide
sulfur gives push to the obtaining of sulfur dioxide and this in turn gives push to the production of sulfuric acid which plays a very important role in many processes:
1) Angel's slag processing
2) Angel's geode processing
3) Angel's cupric and ferrous processing - new in last version of angel's refining
4) Getting plastic from Petrochem Plus mod
5) Chrome smelting in angel's smelting
Nickname on ModPortal - Naron79
- ElectroBot
- Manual Inserter
- Posts: 4
- Joined: Thu Dec 21, 2017 5:13 am
- Contact:
Re: PyCoalTBaA or the PyCoal Angels Patch
Im running Factorio 0.16.7, have angelsrefining_0.9.4, pycoalprocessing_1.0.2, and PyCoalTBaA_0.0.7 and am getting this error:
factorio-current.log https://pastebin.com/gF3Nz143
Code: Select all
Mods to disable:Failed to load mods: Error while loading recipe prototype "sand from stone" (recipe): Key "icon_size" not found in property tree at ROOT.recipe.sand from stone
Modifications: PyCoal Touched By an Angel › Angel's Refining › PyCoal Touched By an Angel
Mods to be disabled:
• PyCoalTBaA
• angelsrefining
• PyCoalTBaA
-
- Smart Inserter
- Posts: 1463
- Joined: Sun Jun 15, 2014 11:39 am
- Contact:
Re: PyCoalTBaA or the PyCoal Angels Patch
alright im confused. i am not receiving the icon_size error on my end but it defiantly doesn't have an icon_size in the recipe so the error makes since.ElectroBot wrote:Im running Factorio 0.16.7, have angelsrefining_0.9.4, pycoalprocessing_1.0.2, and PyCoalTBaA_0.0.7 and am getting this error:
factorio-current.log https://pastebin.com/gF3Nz143Code: Select all
Mods to disable:Failed to load mods: Error while loading recipe prototype "sand from stone" (recipe): Key "icon_size" not found in property tree at ROOT.recipe.sand from stone Modifications: PyCoal Touched By an Angel › Angel's Refining › PyCoal Touched By an Angel Mods to be disabled: • PyCoalTBaA • angelsrefining • PyCoalTBaA
ive added the missing info and uploaded a fix. update from the mod portal and let me know if any other issues appear
Re: PyCoalTBaA or the PyCoal Angels Patch
Why getting syngas with coal gas is moved to fluids tab? May be bug?
Nickname on ModPortal - Naron79