Friday Facts #177 - Difficulty settings

Regular reports on Factorio development.
User avatar
Mooncat
Smart Inserter
Smart Inserter
Posts: 1196
Joined: Wed May 18, 2016 4:55 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by Mooncat »

Wow! #1 :lol:
deef0000dragon1
Long Handed Inserter
Long Handed Inserter
Posts: 67
Joined: Fri Jan 02, 2015 11:46 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by deef0000dragon1 »

Something that I Would like to see UI wise is the changing of the basic terrain gen options selection to not use drop down menus. A large part of this is the fact that the drop downs are slow to change if you have to change every single option to large from normal for example.

I don't know how the back-end works, or if this is implementable, but sliders may prove a better, and more analogue solution, and if that is not possible, a switch to radio buttons in a grid would allow for a quick change to every option, and a visual output in a form that would be similar to sliders.
Speadge
Fast Inserter
Fast Inserter
Posts: 140
Joined: Tue Mar 29, 2016 10:01 am
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by Speadge »

could u change the min-max sliders to "single-liners" where u can adjust min & max in one line? like u adjust price-ranges in online-shops.

I think that might add up to clearness of the GUI and avoid confussion when soneone set a higher min than max value.
User avatar
Mooncat
Smart Inserter
Smart Inserter
Posts: 1196
Joined: Wed May 18, 2016 4:55 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by Mooncat »

Now I'm thinking.... how about put those map-related mod settings into this UI, with the new tab "Mod settings"? I mean, some mod settings are prototype related, changing them require Factorio to restart. But the other settings can be changed for each map. I think it will be more user friendly to put those settings here?

A possible solution for deef0000dragon1's problem, as I have encountered it too: add a new "Overall" setting for the ores. You pre-define some reachness, frequency and size levels and group into 5 "Overall" levels. Changing the overall level will automatically change the levels of each ore.
My use case: I personally like to make all ores to be "Very High", "Very Big" and "Very Good", except enemy. With "Overall", I can just change it to the highest level, then maybe adjust the levels of enemy settings and it is done. It can save many clicks. Even better if you have mods that create many new ores.

Thanks for the new recipe difficulty!
Last edited by Mooncat on Fri Feb 10, 2017 4:46 pm, edited 2 times in total.
jorgenRe
Filter Inserter
Filter Inserter
Posts: 535
Joined: Wed Apr 09, 2014 3:32 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by jorgenRe »

Nice one! Although id recommend adding some tooltips if there aren't any on the settings in the settings menu. Other than that love it :D!
Logo
Noticed the told change in FFF #111 so il continue to use my signature ^_^
Thanks for listening to our suggestions, devs :D!
I would jump of joy if we could specify which tiles spawned in a surfaces
User avatar
Klonan
Factorio Staff
Factorio Staff
Posts: 5300
Joined: Sun Jan 11, 2015 2:09 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by Klonan »

jorgenRe wrote:Nice one! Although id recommend adding some tooltips if there aren't any on the settings in the settings menu. Other than that love it :D!
We already have tooltips :)
Gif
urza99814
Long Handed Inserter
Long Handed Inserter
Posts: 91
Joined: Sat Dec 10, 2016 12:57 am
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by urza99814 »

Mooncat wrote:Now I'm thinking.... how about put those map-related mod settings into this UI, with the new tab "Mod settings"? I mean, some mod settings are prototype related, changing them require Factorio to restart. But the other settings can be changed for each map. I think it will be more user friendly to put those settings here?

A possible solution for deef0000dragon1's problem, as I have encountered it too: add a new "Overall" setting for the ores. You pre-define some reachness, frequency and size levels and group into 5 "Overall" levels. Changing the overall level will automatically change the levels of each ore.

Thanks for the new recipe difficulty!
Overall options or even just using radio buttons would be awesome. I play with a Steam controller which makes changing a big list of drop-downs somewhat painful. Sliders would be OK if there aren't a ton of options -- otherwise dialing in a precise value still kinda sucks. Sometimes that's still the best solution, but when there's only a couple choices and a lot of options to set radio buttons would be great.
mrhobby
Manual Inserter
Manual Inserter
Posts: 2
Joined: Tue Mar 17, 2015 5:42 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by mrhobby »

How those difficulty setting will affect achievements?
Should be there an achieve for beating extra hard mode?
evilbrain
Burner Inserter
Burner Inserter
Posts: 9
Joined: Mon Oct 31, 2016 7:09 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by evilbrain »

Can we have destruction factor go to negative values so you can go out killing nests to temporarily weaken enemies?
And maybe another slider to speed up evolution every time you kill a spawner.
Marconos
Filter Inserter
Filter Inserter
Posts: 301
Joined: Mon Jun 02, 2014 10:46 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by Marconos »

Really like the new game settings.

Hopefully there is an extreme setting that make everything expensive and slow with biter evolution cranked up. Would make for a very fun experience IMO.
xfir01
Long Handed Inserter
Long Handed Inserter
Posts: 93
Joined: Fri Feb 10, 2017 5:08 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by xfir01 »

evilbrain wrote:Can we have destruction factor go to negative values so you can go out killing nests to temporarily weaken enemies?
And maybe another slider to speed up evolution every time you kill a spawner.
That actually sounds like an interesting play dynamic. Crank up the time and pollution factors, and go out to kill spawners if they start to be too much to handle.
Lilly
Inserter
Inserter
Posts: 49
Joined: Mon Apr 11, 2016 6:42 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by Lilly »

Considering the amount of settings that exist now, it might be useful to be able to have presets, so you can pick one that is close to what you want, and don;t have to change much. It is then also useful if you could save your settings as a new preset.
User avatar
Gergely
Filter Inserter
Filter Inserter
Posts: 616
Joined: Sun Apr 10, 2016 8:31 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by Gergely »

Unless you disable the achievements if the difficulty is bellow default, I am considering this an unfair feature.
SaintFlow
Inserter
Inserter
Posts: 48
Joined: Fri Mar 18, 2016 6:13 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by SaintFlow »

I am unhappy. I bet you could have told us that a month ago. Most likely more. And even last week when at least somebody did talk about it (which I much appreciated), it sounded like MAYBE end of Feb or if that doesnt hold up early March. now its an optimistic end of March which means most likely April+.

As much as I respect the work which is Factorio, I do not feel good at times when I visit this place. When people talk about some issues they have with the game, they get told "Turnaround time for bugs is like half a day max" (which almost sounds like bragging) and "oh, that one is already fixed in 0.15!". When 0.15 is a version at least a month(s) away for customers so they have to live with or work around their issues until then. Oh well. Someday.
kinnom
Filter Inserter
Filter Inserter
Posts: 706
Joined: Fri Dec 26, 2014 4:20 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by kinnom »

SaintFlow wrote:I am unhappy. I bet you could have told us that a month ago. Most likely more. And even last week when at least somebody did talk about it (which I much appreciated), it sounded like MAYBE end of Feb or if that doesnt hold up early March. now its an optimistic end of March which means most likely April+.

As much as I respect the work which is Factorio, I do not feel good at times when I visit this place. When people talk about some issues they have with the game, they get told "Turnaround time for bugs is like half a day max" (which almost sounds like bragging) and "oh, that one is already fixed in 0.15!". When 0.15 is a version at least a month(s) away for customers so they have to live with or work around their issues until then. Oh well. Someday.
This is an indie game, and all the devs are focused on bringing out 0.15. Bringing out updates for minor bugs is not worth it at this moment
no yes yes no yes no yes yes
AcolyteOfRocket
Fast Inserter
Fast Inserter
Posts: 124
Joined: Sun Mar 06, 2016 9:58 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by AcolyteOfRocket »

Nice catch with the Lua reference problem.

Wrt difficulty, I hope that extreme settings will be possible since it can be fun to start a low resource deathworld where getting trains up is necessary, but not inevitable, meaning it is possible to lose.

I also enjoy setting some things high and some things low, so making each property of interest individually tweakable needs to remain in the game.
KeylanRed
Manual Inserter
Manual Inserter
Posts: 3
Joined: Sat Feb 04, 2017 5:52 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by KeylanRed »

kinnom wrote:
SaintFlow wrote:I am unhappy. I bet you could have told us that a month ago. Most likely more. And even last week when at least somebody did talk about it (which I much appreciated), it sounded like MAYBE end of Feb or if that doesnt hold up early March. now its an optimistic end of March which means most likely April+.

As much as I respect the work which is Factorio, I do not feel good at times when I visit this place. When people talk about some issues they have with the game, they get told "Turnaround time for bugs is like half a day max" (which almost sounds like bragging) and "oh, that one is already fixed in 0.15!". When 0.15 is a version at least a month(s) away for customers so they have to live with or work around their issues until then. Oh well. Someday.
This is an indie game, and all the devs are focused on bringing out 0.15. Bringing out updates for minor bugs is not worth it at this moment
Depends on the time frame, in my opinion. I don't think I have ever heard "indie development" used as a full excuse to not release bug fixes. I completely understand how being told that bugs are fixed but being held off for 0.15 when the release of 0.15 continues to get pushed back could be quite frustrating to people that purchased the game.
maniak1349
Long Handed Inserter
Long Handed Inserter
Posts: 79
Joined: Mon Nov 03, 2014 12:28 pm
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by maniak1349 »

UI controllable settings are always good to have. But since there is more and more of them (and with mod settings coming there will be a LOT more) isn't it time to add some kind of a preset manager? Changing every setting every time you start a game is such a PITA.

Complexity settings sound good, my guess is Marathon mod and such was an inspiration? While being a lot of fun for players it will probably add a lot of work for modders. They will obviously be able to leave it at normal at all times, but it will make mods look a little flat in this aspect compared to vanilla. I guess it will depend on how good variety of recipe complexity will be implemented in vanilla. If it will be fun to play with while being easy to imitate/extend then it will definitely worth it. Anyway, its probably a good topic for a community discussion.
Rseding91
Factorio Staff
Factorio Staff
Posts: 14473
Joined: Wed Jun 11, 2014 5:23 am
Contact:

Re: Friday Facts #177 - Difficulty settings

Post by Rseding91 »

Speadge wrote:could u change the min-max sliders to "single-liners" where u can adjust min & max in one line? like u adjust price-ranges in online-shops.

I think that might add up to clearness of the GUI and avoid confussion when soneone set a higher min than max value.
The GUI already handles that by not allowing it. When you slide min > max it just moves max >= min automatically.
If you want to get ahold of me I'm almost always on Discord.
Post Reply

Return to “News”