Performance optimization - post your saves

[Semaphor]

A big FPS slowdown I've seen can be reproduced without mods or a save:

1. Have a large parcel of land that is paved. I mean HUGE.
2. Grab a blueprint of that massive area of paved land so you get a blueprint of nothing but paved area.
3. have the blueprint in hand so you get a "ghosted" copy of the pavement.
4. Alpha blending/rendering drops my FPS to it's knees.

Specs: i7 3.2Ghz, NVIDIA® GeForce® GTX 460M 1.5GB at 1920x1080, max window (not fullscreen).

This might be a limitation of my hardware. I also see this when creating a huge blueprint of some factory set up. The blueprint ghosting kills performance.

[Rseding91]

A big FPS slowdown I've seen can be reproduced without mods or a save:

1. Have a large parcel of land that is paved. I mean HUGE.
2. Grab a blueprint of that massive area of paved land so you get a blueprint of nothing but paved area.
3. have the blueprint in hand so you get a "ghosted" copy of the pavement.
4. Alpha blending/rendering drops my FPS to it's knees.

Specs: i7 3.2Ghz, NVIDIA® GeForce® GTX 460M 1.5GB at 1920x1080, max window (not fullscreen).

This might be a limitation of my hardware. I also see this when creating a huge blueprint of some factory set up. The blueprint ghosting kills performance.

That's just your hardware. I get some small slowdown with large blueprints but nothing like what you describe.

[Avezo]

Bit disappointed loop train networks are not being looked at. Or are they not really causing that much lag after all?

[Rseding91]

Bit disappointed loop train networks are not being looked at. Or are they not really causing that much lag after all?

They never have. I have no idea where anyone got that idea from.

[Avezo]

Bit disappointed loop train networks are not being looked at. Or are they not really causing that much lag after all?

They never have. I have no idea where anyone got that idea from.

I've heard about that from some youtube factorio series (only Xterminator's videos come to my mind atm, but I recall there were others). Apparently it only shows in really big rail networks though.

[DeathMers]

Rseding9# are u here? I have a question. Recently i've been playing and I decide to expand factory to make things go little bit 'faster'. I had a single -semidouble line main factory with apx drain of 700-850 MW. Then i built 4 belt main bus for green/red circuits, copp. wires, wheels and solar panels. Factory started to drain over 1GW power, i had around 2000 steam engines as main power source and few thousands solar panels and accumulators. The main power source started to be more damanding, and my single line rocket fuel supply was not enough, so i decide to expand main power source in solar panels and accumulators and leave steam as failsafe. It was that time i first encounteted fps ups drops. I was on stable 60 and it drppped down around 45 ups (and fps too). Strange thing is, it happened after massive solar panels and accumulators expand (around 1GW factory drain). Then i had to expand more, now i have apx. 4GW factory drain, 3x solar panels (apx. 30k), 3x accumulators (apx. 20k - ish), 5x robots (apx. 20k), but that fps ups drop is still stable and same like when i had 1GW factory drain, around 40. It doesn't change much. The main thing that i changed was solar panels and accumulators expand and ofcourse beacons, cause all my factories, drills, oil pumps has full 3 tier speed modules and few beacons with same mods near by. Is this that mentioned bottleneck, death by thousands cuts, like u mentioned in fff? Are big amounts of solar panels and accumulators and beacons optimized enough? I could post save if u want, it has 50mb.

[Rseding91]

Rseding9# are u here? I have a question. Recently i've been playing and I decide to expand factory to make things go little bit 'faster'. I had a single -semidouble line main factory with apx drain of 700-850 MW. Then i built 4 belt main bus for green/red circuits, copp. wires, wheels and solar panels. Factory started to drain over 1GW power, i had around 2000 steam engines as main power source and few thousands solar panels and accumulators. The main power source started to be more damanding, and my single line rocket fuel supply was not enough, so i decide to expand main power source in solar panels and accumulators and leave steam as failsafe. It was that time i first encounteted fps ups drops. I was on stable 60 and it drppped down around 45 ups (and fps too). Strange thing is, it happened after massive solar panels and accumulators expand (around 1GW factory drain). Then i had to expand more, now i have apx. 4GW factory drain, 3x solar panels (apx. 30k), 3x accumulators (apx. 20k - ish), 5x robots (apx. 20k), but that fps ups drop is still stable and same like when i had 1GW factory drain, around 40. It doesn't change much. The main thing that i changed was solar panels and accumulators expand and ofcourse beacons, cause all my factories, drills, oil pumps has full 3 tier speed modules and few beacons with same mods near by. Is this that mentioned bottleneck, death by thousands cuts, like u mentioned in fff? Are big amounts of solar panels and accumulators and beacons optimized enough? I could post save if u want, it has 50mb.

Solar panels and accumulators have a constant cost so having 1 of each is the same as having 100,000 of each. What you're seeing is you simply quadrupled the size of your factory and now it has to do 4x the work as before.

If you want to post your save feel free. I'll take a look at it and see what I find.

[Frightning]

Rseding9# are u here? I have a question. Recently i've been playing and I decide to expand factory to make things go little bit 'faster'. I had a single -semidouble line main factory with apx drain of 700-850 MW. Then i built 4 belt main bus for green/red circuits, copp. wires, wheels and solar panels. Factory started to drain over 1GW power, i had around 2000 steam engines as main power source and few thousands solar panels and accumulators. The main power source started to be more damanding, and my single line rocket fuel supply was not enough, so i decide to expand main power source in solar panels and accumulators and leave steam as failsafe. It was that time i first encounteted fps ups drops. I was on stable 60 and it drppped down around 45 ups (and fps too). Strange thing is, it happened after massive solar panels and accumulators expand (around 1GW factory drain). Then i had to expand more, now i have apx. 4GW factory drain, 3x solar panels (apx. 30k), 3x accumulators (apx. 20k - ish), 5x robots (apx. 20k), but that fps ups drop is still stable and same like when i had 1GW factory drain, around 40. It doesn't change much. The main thing that i changed was solar panels and accumulators expand and ofcourse beacons, cause all my factories, drills, oil pumps has full 3 tier speed modules and few beacons with same mods near by. Is this that mentioned bottleneck, death by thousands cuts, like u mentioned in fff? Are big amounts of solar panels and accumulators and beacons optimized enough? I could post save if u want, it has 50mb.

Solar panels and accumulators have a constant cost so having 1 of each is the same as having 100,000 of each. What you're seeing is you simply quadrupled the size of your factory and now it has to do 4x the work as before.

If you want to post your save feel free. I'll take a look at it and see what I find.

If I were to bet on the culprit, my bet would be that it's the 5x bots that are the reason for the UPS drop.

[DeathMers]

well thats it, i exend my factory 4 times, but fps/ups drop started at 1GW demanding factory and stayed pretty much the same whole time, even when in extended factory more 2-3-4GW consumption, fps/ups didnt change much.

Bots? i dont think bots are to blame, at least not alone, even in 3GW factory i had around 3-4K bots, but recently i have started to use pink chests to drain some small ore patches, so i built another 10k logistic bots and 2k construction bots, didnt affect fps/ups at all. Only thing that significnatly affects fps/ups drop is when i F4 menu and visualise bot routes near yellow boxes.

save link, hope it works:
https://dl.dropboxusercontent.com/u/495 ... gistic.zip

[Gnorok]

The attached save file is running at 50 (fps/ups) on my PC (i7 3770@3,5 Ghz, GTX670).
I´m still building my support factory and havn´t even started on rocket parts production. So i´m a little bit scared what happens then

Any suggestions what is eating the processor ressources and how I can optimize would be very appreaciated.

[Rseding91]

... and my files cant be shared that easy....

Yes they can, don't be dramatic.

if u want to find out what i am dooing you have to come to me... i can not hold up communication on this system much longer!

Send Help!

Youtube: Zoukon Valdar, The Last Known Highlander


rated: MATURE

That's just "a slathering of belts" - I already know what's going to be slow about it. So, no thanks.

[Boogieman14]

This save has a very noticable hickup every 1 or 2 seconds. It's very likely completely related to Robot Army, but perhaps it'll show an optimization chance in the mod api

save: https://www.dropbox.com/s/e17ev1ijvnt67 ... y.zip?dl=0
mods: https://www.dropbox.com/s/vwkfa4876a73q5x/mods.zip?dl=0

[Rseding91]

This save has a very noticable hickup every 1 or 2 seconds. It's very likely completely related to Robot Army, but perhaps it'll show an optimization chance in the mod api

save: https://www.dropbox.com/s/e17ev1ijvnt67 ... y.zip?dl=0
mods: https://www.dropbox.com/s/vwkfa4876a73q5x/mods.zip?dl=0

Yeah it's robot army. I don't know how the mod author managed it considering you *don't have a single unit built* that it takes 5 MS/tick idle. I recommend just not using that mod.

[Killerbee]

Found this nice 3 rockets per minute factory on Reddit.
Maybe it can be used to optimize the game.

https://www.reddit.com/r/factorio/comme ... y/dbjvrke/

[Rseding91]

Found this nice 3 rockets per minute factory on Reddit.
Maybe it can be used to optimize the game.

https://www.reddit.com/r/factorio/comme ... y/dbjvrke/

That again is just "a slathering of belts". I already know what will be slow about that.

[DeathMers]

Found this nice 3 rockets per minute factory on Reddit.
Maybe it can be used to optimize the game.

https://www.reddit.com/r/factorio/comme ... y/dbjvrke/

That again is just "a slathering of belts". I already know what will be slow about that.

Just out of curiosity... there is a known problem, bottleneck of fps/ups slowdown - too many droids, belts... Is there any solution for this problem? Like update more optimized version 0.14.xx? And I dont speak about v0.15, cause v0.15 should be generaly less demanding, but this problem will show up sooner or later even in v0.15 .

[Losash]

Like update more optimized version 0.14.xx? And I dont speak about v0.15, cause v0.15 should be generaly less demanding, but this problem will show up sooner or later even in v0.15 .

If I'd be a developer I'd definitly get a strong will to hit that guy...

You know, when someone new comes and tries to point out, that dev's "don't know how to program". But they don't yet know, that "knowing a bottleneck exists" does not equal to "easily solving it".

[Smarty]

Found this nice 3 rockets per minute factory on Reddit.
Maybe it can be used to optimize the game.

https://www.reddit.com/r/factorio/comme ... y/dbjvrke/

That again is just "a slathering of belts". I already know what will be slow about that.

Just out of curiosity... there is a known problem, bottleneck of fps/ups slowdown - too many droids, belts... Is there any solution for this problem? Like update more optimized version 0.14.xx? And I dont speak about v0.15, cause v0.15 should be generaly less demanding, but this problem will show up sooner or later even in v0.15 .

There is no real solution to how many things you can build because you can always place more stuff. Dont expect an optimized version of 0.14 since all the devs are working on 0.15.

[Rseding91]

Just out of curiosity... there is a known problem, bottleneck of fps/ups slowdown - too many droids, belts... Is there any solution for this problem? Like update more optimized version 0.14.xx? And I dont speak about v0.15, cause v0.15 should be generaly less demanding, but this problem will show up sooner or later even in v0.15 .

Nope, there will always be an upper limit to how much can be built before the game slows down because there's an upper limit to how much information a given CPU/motherboard/set of RAM can process per CPU cycle.

We can (and do) make some small improvements but there's always an upper limit and there's nothing we can do about that.

[DeathMers]

Like update more optimized version 0.14.xx? And I dont speak about v0.15, cause v0.15 should be generaly less demanding, but this problem will show up sooner or later even in v0.15 .

If I'd be a developer I'd definitly get a strong will to hit that guy...

You know, when someone new comes and tries to point out, that dev's "don't know how to program". But they don't yet know, that "knowing a bottleneck exists" does not equal to "easily solving it".

Well... Sad story bro... But if you would be a developer, you would actually find a difference between what I wrote and what you subjectively presumed. Never tried to point out dev's dont know how to program, or it is easy to solve this problem because it is known problem... Never wrote it, lrn2read JFC. I know shit about programming, im not a programmer, so i just kindly askes simple specified question in a proper thread. And yes, i know there is no construction limit in game, so there always be a HW limitation. My question was about the possibility of solution, optimalization, and Rseding has already answered. Thx.