[0.12.x][v0.12.7] Bob's Enemies Mod
Moderator: bobingabout
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
My biters don't attack walls either, tho they don't mind chewing on turrets once i make a hole large enough. Also i've made a hole and enemies attack again. Tho it's strange, there are like 20+ titans even at smallest nests but whenever attack comes it's only like 2 titans and 2 mediums.
EDIT. Just turned the mod off. The enemies are now finally attacking walls and attacking much more often from all directions. Ironically turning this mod off made game much more intense) Hope this mod gets fixed soon since all my other mods were set to repell harder enemies.
EDIT. Just turned the mod off. The enemies are now finally attacking walls and attacking much more often from all directions. Ironically turning this mod off made game much more intense) Hope this mod gets fixed soon since all my other mods were set to repell harder enemies.
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
It is possibly the issue could be with attack range. I purposely kept this low, to prevent the issue of biters biting at things behind walls. (older games had issues where a biter could destroy a turret placed directly behind a wall.)
It might be worth trying to increase the biter attack range and see what happens.
It might be worth trying to increase the biter attack range and see what happens.
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
I think its good that biters can attack turrets behind walls. The vanilla larger biters list this as a feature.
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
I'm finding that at around 50% evolution I can hardly do any damage to some of these biters. Is this intended or am I perhaps doing something wrong? I used 100 rockets to destroy one spawner.
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
I can't remember the exact figures, but at around 50% you should be starting to see some of my newer beasts, they are supposed to be harder to kill, yes. If whatever weapon you're using isn't very effective, try a different one, as they have different resistances.Zaeon wrote:I'm finding that at around 50% evolution I can hardly do any damage to some of these biters. Is this intended or am I perhaps doing something wrong? I used 100 rockets to destroy one spawner.
As for the spawners, my tougher spawners are harder to kill, they'll be more resistant to "Fancy damage" like explosions, so unless you have the more advanced ammos, you're probably best off using standard piercing ammo, either in a higher damaging weapon like a Rifle, or a gun turret.
In fact my latest game, I went with gun turrets as my primary defence. I can't build lasers yet, but that's beside the point.
-
- Burner Inserter
- Posts: 13
- Joined: Mon Mar 21, 2016 11:40 pm
- Contact:
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
Is this mod compatible with misanthrope or natural evolution? I asked in the natural evolution thread as well.
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
Since I don't edit spawners, but instead add my own to the game, I don't see why Natural Evolution wouldn't work. And I don't actually know what Misanthrope is trying to do. There is a note in Natural Evolution saying it doesn't work with DyTech, but no such note about Bob's Mods.donkeystealing wrote:Is this mod compatible with misanthrope or natural evolution? I asked in the natural evolution thread as well.
However, I don't see why either wouldn't work with this mod. Without looking at the code though, I can't say it definitely will, or definitely won't work.
-
- Burner Inserter
- Posts: 13
- Joined: Mon Mar 21, 2016 11:40 pm
- Contact:
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
Guess I'll just try both, thanks for the answer! Really love your mods, used them from my first game!bobingabout wrote:Since I don't edit spawners, but instead add my own to the game, I don't see why Natural Evolution wouldn't work. And I don't actually know what Misanthrope is trying to do. There is a note in Natural Evolution saying it doesn't work with DyTech, but no such note about Bob's Mods.
However, I don't see why either wouldn't work with this mod. Without looking at the code though, I can't say it definitely will, or definitely won't work.
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
Natural Evolution is definitely compatible with Bob's, that's how I play!donkeystealing wrote:Guess I'll just try both, thanks for the answer! Really love your mods, used them from my first game!bobingabout wrote:Since I don't edit spawners, but instead add my own to the game, I don't see why Natural Evolution wouldn't work. And I don't actually know what Misanthrope is trying to do. There is a note in Natural Evolution saying it doesn't work with DyTech, but no such note about Bob's Mods.
However, I don't see why either wouldn't work with this mod. Without looking at the code though, I can't say it definitely will, or definitely won't work.
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
Hi, thanks for this cool mod.
unlike your other mods there is no german language file for this one, so i did a quick translation
unlike your other mods there is no german language file for this one, so i did a quick translation
- Attachments
-
- bobenemies.cfg
- german language file
- (1.97 KiB) Downloaded 189 times
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
I just took a quick look at the boblocale mod, there is indeed a bobenemies.cfg file within that mod, and it does contain locale translations.eudel wrote:Hi, thanks for this cool mod.
unlike your other mods there is no german language file for this one, so i did a quick translation
I really need to get around to removing all the old translations from the mods themselves, they interfere with the locale mod.
to note: the locale mod as created because I depend on people updating the locale files for me, I can't easilly translate them myself, and I can't easilly just release a new version of the mods for a locale update. So the general agreement was that I just don't try, I let 3rd party members maintain the locale mod instead.
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
I just tried to switch to boblocale mod, but it gave me an error message at startup.bobingabout wrote:I just took a quick look at the boblocale mod, there is indeed a bobenemies.cfg file within that mod, and it does contain locale translations.
I really need to get around to removing all the old translations from the mods themselves, they interfere with the locale mod.
to note: the locale mod as created because I depend on people updating the locale files for me, I can't easilly translate them myself, and I can't easilly just release a new version of the mods for a locale update. So the general agreement was that I just don't try, I let 3rd party members maintain the locale mod instead.
Using latest version (0.12.3)
Filename of mod boblocale-0.12.3.zip doesnt match the expected boblocale_0.12.1.zip (case sensitive!)
after renaming boblocale-0.12.3.zip to boblocale_0.12.1.zip, the error message is gone.
is this expected filename hardcoded inside of your mods?
Re: [0.12.x][v0.12.6] Bob's Enemies Mod
Those are two issues with boblocale mod. First one is incorrect name of zip file, second one is wrong version inside info.json.eudel wrote:I just tried to switch to boblocale mod, but it gave me an error message at startup.bobingabout wrote:I just took a quick look at the boblocale mod, there is indeed a bobenemies.cfg file within that mod, and it does contain locale translations.
I really need to get around to removing all the old translations from the mods themselves, they interfere with the locale mod.
to note: the locale mod as created because I depend on people updating the locale files for me, I can't easilly translate them myself, and I can't easilly just release a new version of the mods for a locale update. So the general agreement was that I just don't try, I let 3rd party members maintain the locale mod instead.
Using latest version (0.12.3)
Filename of mod boblocale-0.12.3.zip doesnt match the expected boblocale_0.12.1.zip (case sensitive!)
after renaming boblocale-0.12.3.zip to boblocale_0.12.1.zip, the error message is gone.
is this expected filename hardcoded inside of your mods?
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [0.12.x][v0.12.7] Bob's Enemies Mod
Next to receave an overhaul... Enemies mod.
v0.12.7
* split enemies file into biters, spitters, spawners, worms and values files.
* Renamed Bigger Biter/Spitter to Huge
* Renamed Biggest Biter/Spitter to Giant
* Added Big Piercing biter and Big Electric spitter.
* Added Huge Explosive Biter and Huge Acid Spitter
* Added Leviathan Biter/Spitter (Nasty!)
* Resistances reballancing
* Added usage of Electric damage type instead of impac
* Added electric and piercing resistances.
* Loot table reballance. Elemental types always drop coloured artifacts (if they're enabled) and no regulars.
* Renamed my Spawners to Elemental Spawners, And lowered their health to 1500 from 3500. (normals are only 350)
The original intention of a harder to kill spawner was to make it only show up in later evolution factor scores, but that wasn't possible, so the purpose changed, but it kept the high health.
v0.12.7
* split enemies file into biters, spitters, spawners, worms and values files.
* Renamed Bigger Biter/Spitter to Huge
* Renamed Biggest Biter/Spitter to Giant
* Added Big Piercing biter and Big Electric spitter.
* Added Huge Explosive Biter and Huge Acid Spitter
* Added Leviathan Biter/Spitter (Nasty!)
* Resistances reballancing
* Added usage of Electric damage type instead of impac
* Added electric and piercing resistances.
* Loot table reballance. Elemental types always drop coloured artifacts (if they're enabled) and no regulars.
* Renamed my Spawners to Elemental Spawners, And lowered their health to 1500 from 3500. (normals are only 350)
The original intention of a harder to kill spawner was to make it only show up in later evolution factor scores, but that wasn't possible, so the purpose changed, but it kept the high health.
Re: [0.12.x][v0.12.7] Bob's Enemies Mod
Yay, looking forward to facing these new guys!
You should add the below to bobenemies.cfg:
You should add the below to bobenemies.cfg:
Code: Select all
[damage-type-name]
bob-pierce = Bob's Pierce Damage
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [0.12.x][v0.12.7] Bob's Enemies Mod
Ah. I probably missed this one off for 2 reasons.TheSAguy wrote:Yay, looking forward to facing these new guys!
You should add the below to bobenemies.cfg:
Code: Select all
[damage-type-name] bob-pierce = Bob's Pierce Damage
Previously, it was dealt damage only (I think), so the name didn't show up on anything.
And, it is defined in the Warfare mod, so since I have them both installed, it shows as translated, as such I didn't realise it wasn't already in this mod.
Re: [0.12.x][v0.12.7] Bob's Enemies Mod
If I have a savegame with Bob's Enemies 0.12.6, is it safe to upgrade to 0.12.7, or will the changes mess things up?
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [0.12.x][v0.12.7] Bob's Enemies Mod
You might need to update the library mod too, depending on what I've done in the mod (I can't remember, and can't look it up right now), but updating the mod should NOT break anything, you may find things a little harder with the changed resistances though.
Re: [0.12.x][v0.12.7] Bob's Enemies Mod
Ok thanks. One other question- is there any non-tedious way to clean up the thousands and thousands of artifacts that pollute all of the walls outside of all of my mining camps? The best I've come up with so far is to take a whole bunch of robot bays, plant them in the middle of a used-up mining camp and start issuing deconstruction commands. Even with several hundred bots though, it still takes ages for them to finally finish cleaning everything up though and the whole process is quite tedious. I'm just wondering if maybe I haven't noticed an important technology or technique for handling this.
Re: [0.12.x][v0.12.7] Bob's Enemies Mod
This video shows a good example how you can collect the artifacts by belts: https://www.youtube.com/watch?v=jb6cmccv5-I
Greetings steinio
Greetings steinio