Dark belt magic? Sideloading from two sides working differently?

Don't know how to use a machine? Looking for efficient setups? Stuck in a mission?
Post Reply
Copy link
Premu
Fast Inserter
Fast Inserter
Posts: 104
Joined: Wed Nov 13, 2019 4:40 pm
Contact:
Contact Premu

Dark belt magic? Sideloading from two sides working differently?

Post by Premu »

Until now I always thought that if you sideload a belt into another belt which is already fully compressed on that side, that the items on the incoming belt will wait.

But now I saw a different behaviour. I designed a production line for a full blue belt of green science. According to my math, I need 36 assemblers for that. As inserters sometimes might leave gaps due to timing, I built 2 rows of 20 assemblers with their output belts merged afterwards. The "spare" assemblers should fill any potential gaps. To be really sure to have no gaps, I also added extra output belts to the last of the two assemblers, each sideloading the main output belt, just in case. I expected that these belts would back up and fill up any left over gap should one still happen.

Now the result is like that:

Image

It works like I expected on the lower half. But on the upper half, somehow the sideloaded science packs always manage to sneak in into the already fully compressed belt.

What is happening there? Is this a bug or a known issue?
Top
User avatar
boskid
Factorio Staff
Factorio Staff
Posts: 3017
Joined: Thu Dec 14, 2017 6:56 pm
Contact:
Contact boskid

Re: Dark belt magic? Sideloading from two sides working differently?

Post by boskid »

Those cases are not same because top sideloading puts items close to the left edge of transport belt while the sideloading from the bottom puts items close to right edge of the transport belt. On the left you also have sideloading which will force transport lines to be cut after 2 tiles which in this case will be really close to where the top sideloading happens from the last assembler. This behavior is just a corner case of how transport lines are woken up and their update order which for 1 tick when activating some lines may not be accurate causing sideloading to have apparent priority and being able to insert items into in between of 2 directly connected transport lines.

I am aware of this behavior but i have no better solution to get rid of it as other solutions would cause performance penalties.
Top
Premu
Fast Inserter
Fast Inserter
Posts: 104
Joined: Wed Nov 13, 2019 4:40 pm
Contact:
Contact Premu

Re: Dark belt magic? Sideloading from two sides working differently?

Post by Premu »

Thanks for the reply. It's nice to understand the deeper mechanics in here. :) Well, it's not really an issue as I'm overproducing by a safe margin. And in doubt I can just lengthen the belt and merge them later.
Top
User avatar
SackCFix
Burner Inserter
Burner Inserter
Posts: 19
Joined: Sun May 31, 2020 8:17 am
Contact:
Contact SackCFix

Re: Dark belt magic? Sideloading from two sides working differently?

Post by SackCFix »

Hi Folks :D

so while i was creating a somewhat new Train-Unloading-Station i found something interesting.

This is what i've expected with my understanding of balancing and sideloading:
sideloading_expected.png
sideloading_expected.png (1.09 MiB) Viewed 2538 times
A nice balanced Belt with almost no gaps :)


But the Outcome was this:
sideloading_unexpected.png
sideloading_unexpected.png (1.09 MiB) Viewed 2538 times
Now, if you look closely, the only difference here is the red belt coming from the underground belt which is then sideloaded to the Output. This reminded me of this Thread. And yes, the problem is that Items can be sideloaded onto a belt even this belt is saturated and even worse, this sideloading belt can block the belt it is loading onto which means priority is messed up.


Not a big problem. But as i tried to understand whats going on there in the details, that really boggled my mind.
sideloading_detail.png
sideloading_detail.png (125.37 KiB) Viewed 2538 times
This image shows the exact same setup, but they behave differently. The upper one works as expected (Priority for the Items coming from the right Inserter). But the lower one had the issue that boskid mentioned (Priority for the Items coming from the left Inserter).
(To keep track of whats going on i placed those red and greens constant combinators)

The Video attached shows this in Action. (Recorded at 30UPS)
belt_sideloading.mp4
(5.32 MiB) Downloaded 80 times

And now, to put this even further i made this testing setup:
sideloading_testing.png
sideloading_testing.png (1.63 MiB) Viewed 2538 times

So far so good. Until i removed a powerpole and everything... well... was messed up again. Belts that worked before now did that sideloading and vice versa. Removed the powerpole again. Nothing happened. Cut out segments of the build and copied back in again and stuff randomly changed. Moved segments a few tiles over and their behavior changed, moved them back, up, down, rotate, flipped, changed distances and all that.

Well, i tried to understand whats going on and i must say that this is the only thing that behaves inconsistent in the entire game. And from different posts i knew that Factorio was "fully deterministic"... so what if it wasn't?

Lets say i made blueprints for my unloading-stations and they behave differently?
sideloading_inconsistency.png
sideloading_inconsistency.png (473.75 KiB) Viewed 2538 times
Indeed, they are all the same, wired to a single master-combinator but the outcome is different. (The arithmetic combinators have no other use than to show the ingridients of the left and right chests) :shock:

In my case, this leads to uneven unloading of the chests which will delay the next train for unloading... and moving the belt one tile further does the fix. So not a big deal.

This Blueprint includes the Setup shown in the above image:

(After the Filterinserters are done with loading, deactivate the constant combinator (Iron) and activate the other (checkmark))


I'm not saying that this is "non-deterministic" or "random", this sure works as intended but the problem i have with this behavior is that it's out of my scope of understanding. I cannot reproduce the same outcome or maybe i just haven't found the right answers :roll:


So folks, keep an eye on your belts, maybe they do their own things. And with that i don't mean stuff like "WHY is there stone on my coal belt?" ;)
Top
User avatar
BlueTemplar
Smart Inserter
Smart Inserter
Posts: 3110
Joined: Fri Jun 08, 2018 2:16 pm
Contact:
Contact BlueTemplar

Re: Dark belt magic? Sideloading from two sides working differently?

Post by BlueTemplar »

Let me guess... show-tile-grid strikes again ? :P
BobDiggity (mod-scenario-pack)
Top
Post Reply

Return to “Gameplay Help”