[0.11.6]Filtered Splitters - Huge stability boost!
Re: [MOD 0.11.3]Filtered Splitters - N-way splitting and fil
It's an option on the graphics settings in the system menu.
For some reason it seems to no longer be enable by default, and must be turned on manually at some point after installing Factorio. *shrug*
Oh, and the error message about the ID missing addresses player directly. Other than that, I saw no references.
E:derp
For some reason it seems to no longer be enable by default, and must be turned on manually at some point after installing Factorio. *shrug*
Oh, and the error message about the ID missing addresses player directly. Other than that, I saw no references.
E:derp
Last edited by n9103 on Thu Dec 11, 2014 8:17 pm, edited 1 time in total.
Re: [MOD 0.11.3]Filtered Splitters - N-way splitting and fil
Grimshad wrote:The splitters losing the ID's is just because the original authors code isn't fleshed out. They will be finicky and if you edit them in any way other than changing the filters you will most likely have to re-place them all. They are a place and leave alone type of item. (and i don't have the time or will to expand on it)n9103 wrote:Had a problem with the splitters dis-associating (I'm gonna call it that anyway), requiring the series to be pulled up and re-built. (Hadn't run into this specifically before, but not very surprised, as they were touchy to get going once or twice.)
Additionally, the inserter arrows always point East (not a big problem) and also block the ALT overlay, so it's hard to tell what a specific splitter is filtering (kind of big problem).
I suspect that setting a non-zero radius while keeping an essentially infinite turn speed would fix the new issues.
Not sure about fixing the lost ID problem though.
The inserter arrows... in my game it does not show any inserter arrows. Could you tell me how to reproduce this?
Can't reproduce unable to break/replace. Please explain how to reproduce.berni1212 wrote: Its working but i can't break it or Replace it idk why but we use Smartmodpack (Link in Sinature)
I am always getting an error:
Error while running the event handler __Smartspliters__\control.lua:284: Map doesn't contain 1 player this function can't be used
error: This could be a problem with something else in that pack, because I cannot reproduce this error. This happens when something is called from player in MP, which smartsplitters don't do.
And if we start it with MP we get an Desync the thing is it works sometimes and sometimes that comes we don't know with mod is it
Sorry for my bad English ! i will not remove it !
RailTanker [MP WIP]
Our Modpack
WIP Test MODSRailTanker [MP WIP]
Re: [MOD 0.10.x]Filtered Splitters - N-way splitting and fil
This is probably due to the inserter entity pickup and dropoff being at {1000000,0} causing it to generate a chunk there. This combined with the new chunk distance check probably is the cause for those errors.AlphaRaptor wrote:There is still a Bug.
If you place it you get a Permanent Chunk error until you break it.
The pickup and dropoff positions are such to ensure the inserter will never actually pick something up (as that might result in things disappearing for the player).
Changing that to 500000 or something will probably remove the error.
My mods: Red Alert Harvesters - Clean Pipes - Filtered Splitters
Re: [MOD 0.10.x]Filtered Splitters - N-way splitting and fil
Would you mind point that out within the mod's code?ThaPear wrote: This is probably due to the inserter entity pickup and dropoff being at {1000000,0} causing it to generate a chunk there.
I never saw anything like that, and all the values/offsets seemed completely rational.
Would like to know what part I misunderstood, that's all.
Re: [MOD 0.11.3]Filtered Splitters - N-way splitting and fil
that is on version 0.0.1, prototypes > entity > entities.lua > line 55
i don't know why that number.
i don't know why that number.
Re: [MOD 0.11.3]Filtered Splitters - N-way splitting and fil
Hmm. I would think that would've stuck out to me. Ah well.
But to clarify, it's no longer present in the .3 patch.
Also, the latest patch is courtesy of Grimshad, not myself.
But to clarify, it's no longer present in the .3 patch.
Also, the latest patch is courtesy of Grimshad, not myself.
Re: [MOD 0.11.6]Filtered Splitters - N-way splitting and fil
I've decided to improve this mod.
Updated for version 0.11.6
- Improved the code in many locations, removing several bugs with set and splitter management.
- The splitters should no longer stop functioning.
I've fixed 7 bugs with the splitter and splitter set management. This should greatly improve the stability of the mod.
I've also made it compatible with 11.6.
It seemed to work when I quickly started a multiplayer game and built some splitters. No extensive multiplayer testing has been done though.
My apologies for the long silence, I tend to lose interest in games rather violently.
See the first post for the new download!
Updated for version 0.11.6
- Improved the code in many locations, removing several bugs with set and splitter management.
- The splitters should no longer stop functioning.
I've fixed 7 bugs with the splitter and splitter set management. This should greatly improve the stability of the mod.
I've also made it compatible with 11.6.
It seemed to work when I quickly started a multiplayer game and built some splitters. No extensive multiplayer testing has been done though.
My apologies for the long silence, I tend to lose interest in games rather violently.
See the first post for the new download!
My mods: Red Alert Harvesters - Clean Pipes - Filtered Splitters
Re: [MOD 0.11.6]Filtered Splitters - N-way splitting and fil
Is it compatible for 11.5 too ?ThaPear wrote:I've decided to improve this mod.
Updated for version 0.11.6
- Improved the code in many locations, removing several bugs with set and splitter management.
- The splitters should no longer stop functioning.
I've fixed 7 bugs with the splitter and splitter set management. This should greatly improve the stability of the mod.
I've also made it compatible with 11.6.
It seemed to work when I quickly started a multiplayer game and built some splitters. No extensive multiplayer testing has been done though.
My apologies for the long silence, I tend to lose interest in games rather violently.
See the first post for the new download!
Sorry for my bad English ! i will not remove it !
RailTanker [MP WIP]
Our Modpack
WIP Test MODSRailTanker [MP WIP]
Re: [MOD 0.11.6]Filtered Splitters - N-way splitting and fil
Probably, I believe the latest change for mods was 0.11.3.berni1212 wrote:Is it compatible for 11.5 too ?ThaPear wrote:I've decided to improve this mod.
Updated for version 0.11.6
- Improved the code in many locations, removing several bugs with set and splitter management.
- The splitters should no longer stop functioning.
I've fixed 7 bugs with the splitter and splitter set management. This should greatly improve the stability of the mod.
I've also made it compatible with 11.6.
It seemed to work when I quickly started a multiplayer game and built some splitters. No extensive multiplayer testing has been done though.
My apologies for the long silence, I tend to lose interest in games rather violently.
See the first post for the new download!
My mods: Red Alert Harvesters - Clean Pipes - Filtered Splitters
Re: [MOD 0.11.6]Filtered Splitters - N-way splitting and fil
Gettingi n 11.6 an Chunk error: Trying to make chunk at unresonable position
Sorry for my bad English ! i will not remove it !
RailTanker [MP WIP]
Our Modpack
WIP Test MODSRailTanker [MP WIP]
Re: [MOD 0.11.6]Filtered Splitters - N-way splitting and fil
Did the error show up when loading an existing savegame?berni1212 wrote:Gettingi n 11.6 an Chunk error: Trying to make chunk at unresonable position
I've uploaded a new version that should not give this error.
If it still does, could you provide more information?
My mods: Red Alert Harvesters - Clean Pipes - Filtered Splitters
Re: [MOD 0.10.x]Filtered Splitters - N-way splitting and fil
I haven't looked into the code, so my guess might be wrong, but it could still happen because of:
Instead of making the numbers extremly high, why not making them extremly small?ThaPear wrote: This is probably due to the inserter entity pickup and dropoff being at {1000000,0} causing it to generate a chunk there. This combined with the new chunk distance check probably is the cause for those errors.
The pickup and dropoff positions are such to ensure the inserter will never actually pick something up (as that might result in things disappearing for the player).
Changing that to 500000 or something will probably remove the error.
Re: [MOD 0.10.x]Filtered Splitters - N-way splitting and fil
Because then the inserter arrows show up inside the splitter. They look (and are) out of place in my opinion. It's 200 now, to ensure they're out of screen, but not too far away to cause chunk errors.drs9999 wrote:I haven't looked into the code, so my guess might be wrong, but it could still happen because of:Instead of making the numbers extremly high, why not making them extremly small?ThaPear wrote: This is probably due to the inserter entity pickup and dropoff being at {1000000,0} causing it to generate a chunk there. This combined with the new chunk distance check probably is the cause for those errors.
The pickup and dropoff positions are such to ensure the inserter will never actually pick something up (as that might result in things disappearing for the player).
Changing that to 500000 or something will probably remove the error.
My mods: Red Alert Harvesters - Clean Pipes - Filtered Splitters
- AlphaRaptor
- Fast Inserter
- Posts: 102
- Joined: Wed Dec 03, 2014 6:58 pm
- Contact:
Re: [MOD 0.11.6]Filtered Splitters - Huge stability boost!
Can you do the Fix for 0.11.5 too ?
I'm still playing the Older Version and i would like to have the Splitters Mod installed but i keep getting the Error when i place one.
Its saying that there is some kind of Chunk Error but idk how to fix it .
Thanks
I'm still playing the Older Version and i would like to have the Splitters Mod installed but i keep getting the Error when i place one.
Its saying that there is some kind of Chunk Error but idk how to fix it .
Thanks
Live your life like you want.
Mods are still Awesome , and i love Mods , for every Game.
Lov'in it.
Mods are still Awesome , and i love Mods , for every Game.
Lov'in it.
Re: [MOD 0.11.6]Filtered Splitters - Huge stability boost!
,,, aaand foelisted.
Re: [MOD 0.11.6]Filtered Splitters - Huge stability boost!
I'm confused, do you mean me? Mind explaining why?n9103 wrote:,,, aaand foelisted.
My mods: Red Alert Harvesters - Clean Pipes - Filtered Splitters
Re: [MOD 0.11.6]Filtered Splitters - Huge stability boost!
Not you at all Pear. You're one of my favorite people for making this mod, especially with the new update
Was referring to Alpha, for the pretty constant "requesting" others to make mods to fit his interests throughout the forum, instead of adapting to what's available, or doing the work themselves.
I'd just rather not read yet another request for a custom-made mod from him.
Was referring to Alpha, for the pretty constant "requesting" others to make mods to fit his interests throughout the forum, instead of adapting to what's available, or doing the work themselves.
I'd just rather not read yet another request for a custom-made mod from him.
- AlphaRaptor
- Fast Inserter
- Posts: 102
- Joined: Wed Dec 03, 2014 6:58 pm
- Contact:
Re: [MOD 0.11.6]Filtered Splitters - Huge stability boost!
I'm sorry that i gave a Report to an awesome modmaker.n9103 wrote:Not you at all Pear. You're one of my favorite people for making this mod, especially with the new update
Was referring to Alpha, for the pretty constant "requesting" others to make mods to fit his interests throughout the forum, instead of adapting to what's available, or doing the work themselves.
I'd just rather not read yet another request for a custom-made mod from him.
Live your life like you want.
Mods are still Awesome , and i love Mods , for every Game.
Lov'in it.
Mods are still Awesome , and i love Mods , for every Game.
Lov'in it.
Re: [MOD 0.11.6]Filtered Splitters - Huge stability boost!
Thanks for the update ThaPear. I made further changes that I never posted to enhance the polish. If you would like, feel free to add this to your current mod: http://www.mediafire.com/download/3ukuc ... itters.rar
It simply ensures that the correct research is finished before it shows up and the build icon shows up in the right position.
It simply ensures that the correct research is finished before it shows up and the build icon shows up in the right position.
Re: [MOD 0.11.6]Filtered Splitters - Huge stability boost!
Whats your Problem he Shows that he haves Ideas if noone would ever post something the Forum would be Empty and if he Requests something an Moder can make it or not thats his Choose Alpha can't do it on his own because 1st no Time Second he don't know how and 3rd he has Too much to do in Reallifen9103 wrote:Not you at all Pear. You're one of my favorite people for making this mod, especially with the new update
Was referring to Alpha, for the pretty constant "requesting" others to make mods to fit his interests throughout the forum, instead of adapting to what's available, or doing the work themselves.
I'd just rather not read yet another request for a custom-made mod from him.
Sorry for my bad English ! i will not remove it !
RailTanker [MP WIP]
Our Modpack
WIP Test MODSRailTanker [MP WIP]