[1.1] bugs and balance issues.

[valneq]

I just played through my first Bob's, with the only Angel's mod being the infinite resources. Excellent, as I'm sure you've heard many times.

I found that I was piling up massive amounts of some of the gems and not enough of the others via the infinite gems. I was thinking that an interesting way to deal with giant piles of rubies other than shooting them would be to grind them into silicon powder. In fact, all of the gems could have some equivalent endpoint: diamonds -> carbon, for example, or topaz -> 50/50 aluminium and silicon, etc. Alternatively, some very expensive alien artifacts could be made from excess gems, giving that an infinite source without farming the aliens.

Is this something you might add as way of balancing the excess waste products? If not, I'll consider making a small mod of my own which adds it as an option.

Workaround: Bob's Ores has a mod setting to tweak the ratio of the different gems you get from mining.

[bouncebag]

Hi,

Playing late game on my latest save, creating Napalm Capsules,

Tooltip has:
--
Unknown key: "tooltip-category.shot"
--

I play mostly just Bob's mod with stuff like watefill, cannon turret, FARL and some QoL mods like recipe explorer, so I believe it is just a Bob's mod small issue rather than anything added by another mod.

Been playing with your mod for years and have enjoyed it a lot.

[bobingabout]

Hi,

Playing late game on my latest save, creating Napalm Capsules,

Tooltip has:
--
Unknown key: "tooltip-category.shot"
--

I play mostly just Bob's mod with stuff like watefill, cannon turret, FARL and some QoL mods like recipe explorer, so I believe it is just a Bob's mod small issue rather than anything added by another mod.

Been playing with your mod for years and have enjoyed it a lot.

thanks.
I've made a note of it.

[bouncebag]

It's also the same on the Laser Robot capsule.

[bobingabout]

It's also the same on the Laser Robot capsule.

Also noted.


I'll fix it when I can find motivation.

[moon69]

bobores_1.1.0/prototypes/sulfur.lua appears to be missing:

Code: Select all

icon_size = 64,
icon_mipmaps = 4,

This gives the wrong size icon in LuaGuiElement
→ choose-elem-button (with type = "entity")...

sulfur icon size issueA.png (66.23 KiB) Viewed 8087 times

[bobingabout]

bobores_1.1.0/prototypes/sulfur.lua appears to be missing:

Code: Select all

icon_size = 64,
icon_mipmaps = 4,

This gives the wrong size icon in LuaGuiElement
→ choose-elem-button (with type = "entity")...sulfur icon size issueA.png

Specific to the entity in map editor mode?
Probably why I missed it.

I'll add it to my list.

[WOG]

Has anyone else had the issue of cannon shells being able to collide with Tankotron's legs?

[valneq]

This might not be an actual bug, but when loading all of Bob's mods I see warnings in the logfile:

Code: Select all

  13.168 Warning! Sprite at {0,0; 128x128} from __bobelectronics__/graphics/icons/technology/advanced-electronics-2.png is defined with 4 mipmap levels, but level 1 is expected to be at {128,0; 64x64} which is out of bounds of the source image.
  13.168 Warning! Sprite at {0,0; 128x128} from __bobelectronics__/graphics/icons/technology/advanced-electronics.png is defined with 4 mipmap levels, but level 1 is expected to be at {128,0; 64x64} which is out of bounds of the source image.
  13.168 Warning! Sprite at {0,0; 128x128} from __bobelectronics__/graphics/icons/technology/electronics.png is defined with 4 mipmap levels, but level 1 is expected to be at {128,0; 64x64} which is out of bounds of the source image.
  13.506 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/red-module-1.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.506 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/red-module-2.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.506 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/red-module-3.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.506 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/speed-module-1.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.507 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/speed-module-2.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.507 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/speed-module-3.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.507 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/yellow-module-1.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.507 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/yellow-module-2.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.508 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/yellow-module-3.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.

[bobingabout]

This might not be an actual bug, but when loading all of Bob's mods I see warnings in the logfile:

Code: Select all

  13.168 Warning! Sprite at {0,0; 128x128} from __bobelectronics__/graphics/icons/technology/advanced-electronics-2.png is defined with 4 mipmap levels, but level 1 is expected to be at {128,0; 64x64} which is out of bounds of the source image.
  13.168 Warning! Sprite at {0,0; 128x128} from __bobelectronics__/graphics/icons/technology/advanced-electronics.png is defined with 4 mipmap levels, but level 1 is expected to be at {128,0; 64x64} which is out of bounds of the source image.
  13.168 Warning! Sprite at {0,0; 128x128} from __bobelectronics__/graphics/icons/technology/electronics.png is defined with 4 mipmap levels, but level 1 is expected to be at {128,0; 64x64} which is out of bounds of the source image.
  13.506 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/red-module-1.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.506 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/red-module-2.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.506 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/red-module-3.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.506 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/speed-module-1.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.507 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/speed-module-2.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.507 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/speed-module-3.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.507 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/yellow-module-1.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.507 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/yellow-module-2.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.
  13.508 Warning! Sprite at {0,0; 32x32} from __bobmodules__/graphics/icons/yellow-module-3.png is defined with 4 mipmap levels, but level 1 is expected to be at {32,0; 16x16} which is out of bounds of the source image.

I think that's just because I may have forgotten to set icon_mipmaps to nil on those items.

[Solarwuff]

Just got this error when trying to load all the bob / angel / pyanodon mods
since i am not sure if it's coming from one of your lovely mods
i will post the bug report over here as it mentions bobelectornics

[valneq]

Just got this error when trying to load all the bob / angel / pyanodon mods
[…]

Loading Angel's + Pyanodon's together is not supported by either developers. But the error is very clearly caused by the mod "Circuit Processing", not by any of Bob's mods.

[jodokus31]

Just got this error when trying to load all the bob / angel / pyanodon mods
[…]

Loading Angel's + Pyanodon's together is not supported by either developers. But the error is very clearly caused by the mod "Circuit Processing", not by any of Bob's mods.

Somebody deleted normal recipe branch and most likely not angels or bobs. Not really the fault of "Circuit Processing" to assume it's still there

Code: Select all

 
local cpelectroniccircuitboardrecipe = data.raw.recipe['electronic-circuit']
data.raw.recipe['cp-electronic-circuit-board'] = cpelectroniccircuitboardrecipe
cpelectroniccircuitboardrecipe.name = 'cp-electronic-circuit-board'
cpelectroniccircuitboardrecipe.normal.result = 'cp-electronic-circuit-board' -- this fails

[bobingabout]

Just got this error when trying to load all the bob / angel / pyanodon mods
[…]

Loading Angel's + Pyanodon's together is not supported by either developers. But the error is very clearly caused by the mod "Circuit Processing", not by any of Bob's mods.

Somebody deleted normal recipe branch and most likely not angels or bobs. Not really the fault of "Circuit Processing" to assume it's still there

Code: Select all

 
local cpelectroniccircuitboardrecipe = data.raw.recipe['electronic-circuit']
data.raw.recipe['cp-electronic-circuit-board'] = cpelectroniccircuitboardrecipe
cpelectroniccircuitboardrecipe.name = 'cp-electronic-circuit-board'
cpelectroniccircuitboardrecipe.normal.result = 'cp-electronic-circuit-board' -- this fails

I checked my mods anyway.
bobelectronics is the only one that changes the circuit boards, and "circuit-board" does have 'normal' in there when it's done with it.

[kirazy]

Somebody deleted normal recipe branch and most likely not angels or bobs. Not really the fault of "Circuit Processing" to assume it's still there

Not validating a recipe before you try to modify it is certainly Circuit Processing's fault.

[jodokus31]

Somebody deleted normal recipe branch and most likely not angels or bobs. Not really the fault of "Circuit Processing" to assume it's still there

Not validating a recipe before you try to modify it is certainly Circuit Processing's fault.

Thanks, KiwiHawk is on it.
I thought it, because it's such a basic recipe. If a mod wants to change it, that it at least keeps the structure but assigns the same values to normal and expensive.

[robertwmack]

I've probably missed it somewhere, but I'm stuck in research. I can't get the Full Spectrum Atomics Lab

[kirazy]

I've probably missed it somewhere, but I'm stuck in research. I can't get the Full Spectrum Atomics Lab

Spectrum atomics lab not being a Bob lab, you may want to direct your attention to the mod that adds that building, which I would guess is ScienceCostTweakerM?

[robertwmack]

I've probably missed it somewhere, but I'm stuck in research. I can't get the Full Spectrum Atomics Lab

Spectrum atomics lab not being a Bob lab, you may want to direct your attention to the mod that adds that building, which I would guess is ScienceCostTweakerM?

Sorry, forgot I had that mod. I will reach out to them.

[zantherlegacy]

Not sure if I'm blind, but the logistics mod seem to remove long inserters?