Did you find your Shark Navigator Lift Away Deluxe NV360 upright vacuum losing suction? It is frustrating when you see dirt on the floor after spending a long time vacuuming. But, don't worry; we are here to help!
You can try to fix this problem by giving your Shark model nv360 a thorough clean. There's no need to spend money on repairs or a brand new vacuum when you can maintain it back to its original condition.
We hope after reading our step-by-step advice, your floor is cleaner than ever and the vacuum lasts for a long time, too.
How Often Should You Clean Your Shark Navigator Deluxe NV360?
If you find your Shark vacuum less effective than before, it's time for a cleaning session. The first thing you should look at is the dust cup or dust bag. If the dirt compartment is full, it will prevent your vacuum from performing as usual. So make sure you empty the dust cup regularly before vacuuming.
The second thing you should examine is the filters. There are pre-motor filters and a post-motor filter which is the HEPA (high-efficiency particulate air) filter. It would help if you cleaned the pre-motor filters every couple of months and the HEPA filter every six months.
Overall, we highly recommend that you clean your Shark navigator lift away deluxe nv360 at least four times a year for it to have consistent suction power. A google calendar is also a helpful reminder if you forgot when to clean.
Here are some signs that tell you it's time to clean the vacuum:
- The Shark vacuum loses suction
- There's an unpleasant odor coming from the vacuum
- The vacuum makes a lot of noises
- The Shark 360 vacuum leaves dirt behind
How To Clean A Shark Vacuum Model NV360
If you're experiencing any of the above issues, you might want to clean your vacuum right away. But, first, consult with the Shark 360 vacuum manual to learn how to disassemble the vacuum properly.
Here is what you need for the cleaning process:
- A pair of scissors
- Microfiber cloth
- Water
- Gloves
- A screwdriver set
You must always remember to unplug the vacuum from the power source before cleaning. If you detect a lot of dirt, it is best to clean your vacuum outside. You can also place a sheet underneath the vacuum to avoid making a mess while cleaning.
Step 2: Disassemble the Vacuum
Detach different parts from the vacuum, such as the roller brush, the dirt container, the filters, the hose, and more. Please be mindful of how they fit back in for when you want to reassemble the vacuum.
Step 3: Empty the Dust Cup
Firstly, remove the dirt container from the base unit and empty the dirt into the trash can. Next, you can soak the detached canister in water and use the microfiber cloth to clean it. Finally, rinse the dirt container in cold water and allow for it to air dry completely before putting it back together. Don't reassemble when the parts are still wet because it might cause mold to grow inside the vacuum.
Step 4: Clean the Filters
As we mentioned before, there are two types of filters in the Shark NV360: the foam & felt filters and the HEPA filter.
For foam and felt filters, you can soak them in water and give them a gentle rub until the water is clean. These filters can get damaged easily, so please be mindful when you clean them.
For the HEPA filter, you can rinse it with cold water or lukewarm water. However, it might take the HEPA filter longer to dry completely, so we highly recommend that you leave them.
Step 5: Reassemble the Vacuum
Now that you clean your Shark navigator lift-away deluxe nv360 upright vacuum thoroughly, it's time to start vacuuming again. You might notice that there is no foul odor, and the suction power is back to normal.
Conclusions
We hope after reading our Shark NV360 Reviews, your vacuum will be back to its original condition. Comment below if you have any other tips to share!