- 1TW.png (678.11 KiB) Viewed 51000 times
To produce 1TW worth of power, solar panels isn't going to work. It would require ~16.7 million solar cells, which would result in ~146.500 chunks paved with solar panels. Steam engines is slightly more feasible with 1.1 million reactors and half as many boilers, resulting in ~19.500 chunks paved with steam power and would require 250.000 coal or 80.000 solid fuel per second (note the 50% efficiency of boilers). So for 1TW nuclear power is obviously the way to go. With neighborhood bonuses, A perfect square would be the most efficient. A 71×71 setup would work, but I doubt the heat pipes can be extended far enough to dissipate all the generated heat (I'm running the latest Factorio version, currently 0.16.13, which includes the heat pipe fix from 0.15.11). So I settled for a 2×N design.
Some numbers:
- 6252 nuclear reactors = 1TW / 40MW / 400% + 1 rounded up to the next even number (153 chunks).
- 31.25 fuel cells per second = 6252 reactors / 200 seconds per fuel cell (I used the creative mod).
- A means to transport these fuel cells over up to 31.000 tiles distance = 6252 reactors × 5 tiles.
- At worker robot speed 15 and cargo size 3 and ignoring time spend on recharging, this could be done by 8.200 logistic bots = 31.000 tiles on average × 31.25 fuel / ( 3 tiles per second × 990% ) / 4 items per robot.
- Or simply with 4 transport belts: on each side, one for delivering fuel cells and one for collecting the emptied ones. Note that 31.25 per second is more than what would fit on 2 transport belts (each 13.33/s), so at least fast transport belts (26.66/s) are required.
- 100.000 heat exchangers = 1TW / 10MW (586 chunks).
- 172.000 steam turbines = 1TW / 5.82MW (5034 chunks).
- 8.600 offshore pumps = 172.000 steam turbines × 60 water per second / 1200 water per second (34 chunks).
- To store one fuel cell worth of energy: 82.500 storage tanks = 1TW × 200sec / 2.425GJ or ~700.000 pieces of heat pipe = 1TW × 200sec / ~300MJ.
The design:
To build something this large, I've chosen a row based design that I could repeat vertically as much as necessary. Furthermore, I wanted to keep it as small as possible, which meant I had to get the ratio's right. So, per 30 tile rows I have 12 reactors generating 12×40MW×4 = 1920MW worth of heat. To convert that heat into steam, I need to fit 1920MW / 10MW = 192 heat exchangers within those 30 tile rows. To convert that steam into energy, I need 1920MW / 5.82MW = 330 steam turbines. And of course, everything must be properly connected with fluid and heat pipes. So it's a tight fit.
Reactor core
- reactor.png (538.74 KiB) Viewed 51000 times
Heat exchanger
- heat_exchange.png (395.41 KiB) Viewed 51000 times
Flow meter
Steam turbines
- turbines.png (425.79 KiB) Viewed 51000 times
. There is also a constant combinator, used for counting the number of 'heat exchanger & steam turbine'-arms there are in the reactor (signal M, value 1). Roboports are included in the design to support autonomous building.Controller
- controller.png (1.58 MiB) Viewed 51000 times
Circuit network signals
The result:
- design.png (884.27 KiB) Viewed 51000 times
- 277440 heat pipes
- 247296 pipes
- 177408 turbines (1032GW), 60 turbines (0.056%) more than the optimal ratio.
- 107520 heat exchangers (1075GW), 4304 heat exchangers (4.2%) more than the optimal ratio.
- 68816 underground pipe segments
- 53788 small electric poles
- 48384 storage tanks
- 25812 underground belts
- 16128 pumps
- 12956 belt segments
- 11844 medium electric poles
- 11828 constant combinators
- 10752 offshore pumps, 1884 offshore pumps (21%) more than the optimal ratio.
- 6460 decider combinators
- 6452 long-handed inserters
- 6452 fast inserters
- 6452 reactors (1032GW)
- 40 lamps
- 6 arithmetic combinators
- 1 substation
Energy storage:
The system can contain 1.3G units of steam, or 126TJ worth of steam. The heat pipes, reactors and heat exchangers have a total heat capacity of 449480 MJ/°C. Assuming an effective working range of 400°C, this is ~180TJ worth of heat. During a single fuel cell cycle, the reactor generates (6542-1) × 400% × 8GJ = 209TJ of energy. With a total energy capacity of ~306TJ can easily store that. However, the reactor already switches on when there is still 66.6% steam in the system, reducing the free steam energy capacity to 42TJ. As the heat pipes need to be fully drained before the steam can drop below the threshold of 150.000, that leaves ~222TJ in total, which is still sufficient.
As it takes some time for the heaters and heat pipes to heat up sufficiently to get the heat exchangers running at full capacity, the 67% of steam is needed to prevent brownouts. With 126TJ × 67% = 84TJ worth of steam energy left in the system, that leaves 84TJ / 1032GW = 81 seconds for the reactor to heat the heat exchangers up to full capacity.
Blueprint book
Would you ever need such an amount of power?No! Your factory will die of fps death long before you reach the point that you need 1TW. Merely running the reactor caused my frame rate to drop to 3fps. Luckily it only requires 2 fuel cells to get running at fuel capacity, which at 3fps takes 2 hours.
Fortunately, the design is modular, so you could create a reactor as small as 2 reactors + 1 arm and add additional reactors and arms as necessary (add reactors first and then add arms until the red light of the capacity check turns of). With respect to ratios, 2+6n reactors with 1+5n arms is pretty well balanced. In its smaller forms, it can also be used in normal gameplay. Just find a large enough lake and terraform the parts that don't need water. Also, the heat exchangers and steam turbines are separate, so you can put those as far from each other as you want (as long as you add a pump after every 3 segments of pipe) and use a different means to provide water.
