pY Raw Ores Discussion

pyanodon's mods are here

Moderator: pyanodon

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1909
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon »

aklesey1 wrote:
Wed Dec 12, 2018 7:48 pm
All i can say now:
MOAR SALT TO SALTY GOD!!!! MOOOOOOOOOOOOOOOOOAAAAAAAAAAAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR!!!!! AND MOOOOOOOOAAAAAAAAAAAAAAAARRRRRRRR ROCKS WITH SALT!!!! :mrgreen:

I walked in creative mode about 10 minutes and 1 salt rock contains over 3 000 000 salt but its only 1 mine and i can put there only 1 speed module what means salt will mine some slowly :roll:
SLOW????
pY Coal processing mod
Discord: Pyanodon #5791

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1909
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon »

kinnom wrote:
Wed Dec 12, 2018 8:09 pm
Just updated, you seem to have forgotten the migration files. Now I can't unlock acetylene.
There´s no migration file in that version. Since it was very bugged at launch.
pY Coal processing mod
Discord: Pyanodon #5791

aklesey1
Smart Inserter
Smart Inserter
Posts: 1862
Joined: Sun May 18, 2014 3:45 pm
Contact:

Re: pY Raw Ores Discussion

Post by aklesey1 »

pyanodon wrote:
Wed Dec 12, 2018 8:53 pm
aklesey1 wrote:
Wed Dec 12, 2018 7:48 pm
All i can say now:
MOAR SALT TO SALTY GOD!!!! MOOOOOOOOOOOOOOOOOAAAAAAAAAAAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR!!!!! AND MOOOOOOOOAAAAAAAAAAAAAAAARRRRRRRR ROCKS WITH SALT!!!! :mrgreen:

I walked in creative mode about 10 minutes and 1 salt rock contains over 3 000 000 salt but its only 1 mine and i can put there only 1 speed module what means salt will mine some slowly :roll:
SLOW????
Just remember about all recipes where solt and sodium hydroxide is needed
I intend not to convert salt to sodium hydroxide, bcuz it'll be very expensive to make salt water
And of course i think now niobium plates consuption will be increased bcuz more meeded
Nickname on ModPortal - Naron79

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1909
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon »

this mod is now supported by RSO...if you´re having trouble with salt consuption, you can always set the amount of salt rock higher... Even i playing here having no issues with salt.
pY Coal processing mod
Discord: Pyanodon #5791

immortal_sniper1
Filter Inserter
Filter Inserter
Posts: 771
Joined: Sun Jun 03, 2018 8:54 am
Contact:

Re: pY Raw Ores Discussion

Post by immortal_sniper1 »

aklesey1 wrote:
Wed Dec 12, 2018 9:26 pm
pyanodon wrote:
Wed Dec 12, 2018 8:53 pm
aklesey1 wrote:
Wed Dec 12, 2018 7:48 pm
All i can say now:
MOAR SALT TO SALTY GOD!!!! MOOOOOOOOOOOOOOOOOAAAAAAAAAAAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR!!!!! AND MOOOOOOOOAAAAAAAAAAAAAAAARRRRRRRR ROCKS WITH SALT!!!! :mrgreen:

I walked in creative mode about 10 minutes and 1 salt rock contains over 3 000 000 salt but its only 1 mine and i can put there only 1 speed module what means salt will mine some slowly :roll:
SLOW????
Just remember about all recipes where solt and sodium hydroxide is needed
I intend not to convert salt to sodium hydroxide, bcuz it'll be very expensive to make salt water
And of course i think now niobium plates consuption will be increased bcuz more meeded
use ore mover if needed to move them closer

nagapito
Filter Inserter
Filter Inserter
Posts: 362
Joined: Fri Jul 29, 2016 12:18 am
Contact:

Re: pY Raw Ores Discussion

Post by nagapito »

pyanodon wrote:
Wed Dec 12, 2018 3:20 pm
You´re right! That was a typo that created that impossible loop. Oh boy...dunno how long it will be until next release.
Because you need Nexela to do the changes on the code or because you actually have other plans?

Coz, you have a couple of people around that will happily track the problem and submit a change request on github?

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1909
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon »

nagapito wrote:
Wed Dec 12, 2018 10:07 pm

Because you need Nexela to do the changes on the code or because you actually have other plans?

Coz, you have a couple of people around that will happily track the problem and submit a change request on github?
I do the changes, but i know nothing about code a new release, migration and such. Nexela is my right hand on it and im very glad for it.
pY Coal processing mod
Discord: Pyanodon #5791

NexZone30
Burner Inserter
Burner Inserter
Posts: 7
Joined: Sun Jul 19, 2015 6:49 am
Contact:

Re: pY Raw Ores Discussion

Post by NexZone30 »

Py,

Hey again, I've discovered something that may be of interest to you as I'm rather perplexed by it. After researching Iron 2, you're greeted with the option of either smelting grade one iron or simply smelting processed iron. From my calculations (and practical application), you actually gain more from smelting the processed iron at a 5 Ore : 6 Plate ratio versus the grade one iron at a 25 Ore : 24 Plate Ratio (better than the Iron 1 way). Ultimately, since the grade one iron requires more machines and energy, shouldn't it produce more iron?

Overall, I do understand that you'll need the grade one iron for further progression into high grade iron. But from researching Iron 2, it just seems better to just use one machine and get the extra iron.

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1909
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon »

NexZone30 wrote:
Wed Dec 12, 2018 11:48 pm
Py,

Hey again, I've discovered something that may be of interest to you as I'm rather perplexed by it. After researching Iron 2, you're greeted with the option of either smelting grade one iron or simply smelting processed iron. From my calculations (and practical application), you actually gain more from smelting the processed iron at a 5 Ore : 6 Plate ratio versus the grade one iron at a 25 Ore : 24 Plate Ratio (better than the Iron 1 way). Ultimately, since the grade one iron requires more machines and energy, shouldn't it produce more iron?

Overall, I do understand that you'll need the grade one iron for further progression into high grade iron. But from researching Iron 2, it just seems better to just use one machine and get the extra iron.
makes sense...but direct smelt of processed iron ore takes a lot of time, while grade 1 iron takes almost half of that time. You may dont gain in raw production, but when you dimension it a bit, less time = more production and less energy consumption. Also, you would never reach upper levels of iron (and better yields) is you decide to stop in processed iron ore. This mod is for people adapt their needs to the map they are; If you have few titanium, makes more sense invest more in that chain than invest in iron if you have plenty of it near you.
pY Coal processing mod
Discord: Pyanodon #5791

NexZone30
Burner Inserter
Burner Inserter
Posts: 7
Joined: Sun Jul 19, 2015 6:49 am
Contact:

Re: pY Raw Ores Discussion

Post by NexZone30 »

Ah, makes more sense now.

live22morrow
Long Handed Inserter
Long Handed Inserter
Posts: 74
Joined: Wed Nov 29, 2017 10:59 pm
Contact:

Re: pY Raw Ores Discussion

Post by live22morrow »

NexZone30 wrote:
Wed Dec 12, 2018 11:48 pm
Py,

Hey again, I've discovered something that may be of interest to you as I'm rather perplexed by it. After researching Iron 2, you're greeted with the option of either smelting grade one iron or simply smelting processed iron. From my calculations (and practical application), you actually gain more from smelting the processed iron at a 5 Ore : 6 Plate ratio versus the grade one iron at a 25 Ore : 24 Plate Ratio (better than the Iron 1 way). Ultimately, since the grade one iron requires more machines and energy, shouldn't it produce more iron?

Overall, I do understand that you'll need the grade one iron for further progression into high grade iron. But from researching Iron 2, it just seems better to just use one machine and get the extra iron.
A lot of the recipes aren't very balanced yet. For example, I calculate that for iron, the high grade step gives a yield of 15 ore : 4 plate. And most of the advanced smelting steps reduce the yield. For example, high grade iron direct smelting is 1 hg : 10 plates, while turning to liquid first gives 1 hg : 7.5 plates. After bugs and deadlocks are fixed there will probably be balance passes to fix the yields on many of the chains.

NexZone30
Burner Inserter
Burner Inserter
Posts: 7
Joined: Sun Jul 19, 2015 6:49 am
Contact:

Re: pY Raw Ores Discussion

Post by NexZone30 »

live22morrow wrote:
Thu Dec 13, 2018 1:17 am

A lot of the recipes aren't very balanced yet. For example, I calculate that for iron, the high grade step gives a yield of 15 ore : 4 plate. And most of the advanced smelting steps reduce the yield. For example, high grade iron direct smelting is 1 hg : 10 plates, while turning to liquid first gives 1 hg : 7.5 plates. After bugs and deadlocks are fixed there will probably be balance passes to fix the yields on many of the chains.
Yeah, aluminum seems a bit borked too at the moment. You go from a 6:1 (ore:plate) ratio, to a 5:1 ratio (aluminum 1), to a 6.25:1 ratio (aluminum 2) for basically the same speed and more resources. I don't mind the issues though, it's part of playing such an early release. Hope I'm helping when I can find these things. :3

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1909
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon »

Now a lot of people will think the recipes are unbalanced, but its all part if the plan. In the end, it isnt a matter of how many ores enter and how many plates came out, theres more variables there. Put all machines working at the same time with each recipe for the same plate and you will see if theres some less production for real. If so, theres a real inbalance, but mostly you will see each step giving more yield.
pY Coal processing mod
Discord: Pyanodon #5791

nagapito
Filter Inserter
Filter Inserter
Posts: 362
Joined: Fri Jul 29, 2016 12:18 am
Contact:

Re: pY Raw Ores Discussion

Post by nagapito »

pyanodon wrote:
Thu Dec 13, 2018 8:32 am
Now a lot of people will think the recipes are unbalanced, but its all part if the plan. In the end, it isnt a matter of how many ores enter and how many plates came out, theres more variables there. Put all machines working at the same time with each recipe for the same plate and you will see if theres some less production for real. If so, theres a real inbalance, but mostly you will see each step giving more yield.
What Pyanodon means is, dont just look at the recipes as stand alone.
Simulate the whole chain on Helmod. There you will be able to compare the different chains in two ways:

- If you configure it on the perspective of producing X amount in Y time, you should compare the infrastructure needed to produce the same amount of results in the same time, the power needed and the material input amount required.

- If you configure it on the infrastructure perspective (X amount of machines), you can compare how much each chain produces with similar infrastructures in the same amount of time

This might be similar (haven't had time to check it yet) with Angels smelting... Casting the melted ore into a sheet and then cutting it into plates seems worse when you only look at the recipe but its stupidly faster to make the sheet and cut it then to directly cast to plates. So you loose a little ore but produce a LOT more in the same amount of time. And later techs with coolant are even less efficient but way more faster. This loss of efficiency is compensated by the gains done in the processing and the speed boost just makes your iron plate production be much faster. So the latest tech in Angels does not look like but it gives a similar ratio of ore to plate at a much much faster rate!

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1909
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon »

^^^^^^^^^^^^^^^^^^
pY Coal processing mod
Discord: Pyanodon #5791

splatlevel
Manual Inserter
Manual Inserter
Posts: 4
Joined: Fri Oct 05, 2018 3:08 am
Contact:

Re: pY Raw Ores Discussion

Post by splatlevel »

I think there's a bug in the iron chain. It looks like most of the late game raw ore processing chains can follow the pattern of high grade ore -> reduced ore -> sintered ore -> liquid -> plate. Iron has a reduced block but there's no way to craft it. For the iron chain, you can only go straight from high grade to sinter. Since the reduced block for iron exists in the game and has no crafting recipe to produce it, it makes me think it's a bug.

IpsumEstPan
Burner Inserter
Burner Inserter
Posts: 15
Joined: Mon Sep 17, 2018 6:17 pm
Contact:

Re: pY Raw Ores Discussion

Post by IpsumEstPan »

Oh venerable pY.

I thank you for being so patient with us, those who are blessed with your many gifts. I ask a question, not as a request, but as a wondering.

Are there plans about changing the graphics for vanilla resources, coal, iron, copper, uranium, wood, stone?

Edit: Since there has been talk about balancing, I would gladly help out in balancing efforts. I don't know how to program in lua, but I'm a mathematician, I can probably help somewhere.

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1909
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon »

splatlevel wrote:
Thu Dec 13, 2018 11:48 am
I think there's a bug in the iron chain. It looks like most of the late game raw ore processing chains can follow the pattern of high grade ore -> reduced ore -> sintered ore -> liquid -> plate. Iron has a reduced block but there's no way to craft it. For the iron chain, you can only go straight from high grade to sinter. Since the reduced block for iron exists in the game and has no crafting recipe to produce it, it makes me think it's a bug.
Confirmed...fixed :) thanks
pY Coal processing mod
Discord: Pyanodon #5791

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1909
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon »

IpsumEstPan wrote:
Thu Dec 13, 2018 3:25 pm
Oh venerable pY.

I thank you for being so patient with us, those who are blessed with your many gifts. I ask a question, not as a request, but as a wondering.

Are there plans about changing the graphics for vanilla resources, coal, iron, copper, uranium, wood, stone?

Edit: Since there has been talk about balancing, I would gladly help out in balancing efforts. I don't know how to program in lua, but I'm a mathematician, I can probably help somewhere.
haha no. Sorry. :)
pY Coal processing mod
Discord: Pyanodon #5791

NexZone30
Burner Inserter
Burner Inserter
Posts: 7
Joined: Sun Jul 19, 2015 6:49 am
Contact:

Re: pY Raw Ores Discussion

Post by NexZone30 »

Okay, I installed Helmod and went through the numbers. Yeah, aluminum definitely appears to get worse as you progress from Aluminum 0 to Aluminum 2. No real speed increase, more power (even if you use foundries instead of steel furnaces), more of a foot print, more inputs, and technically less efficient. I used 1000 plates per minute to see if there was an economy of scale, there really isn't.
Attachments
Aluminum 2.PNG
Aluminum 2.PNG (934.51 KiB) Viewed 5874 times
Aluminum 1.PNG
Aluminum 1.PNG (649.94 KiB) Viewed 5874 times
Aluminum 0.PNG
Aluminum 0.PNG (406.33 KiB) Viewed 5874 times

Post Reply

Return to “PyMods”