[MOD 0.11.x+] Straight Pipes - Easier liquid handling

Topics and discussion about specific mods
JamesOFarrell
Filter Inserter
Filter Inserter
Posts: 402
Joined: Fri May 23, 2014 8:54 am
Contact:

[MOD 0.11.x+] Straight Pipes - Easier liquid handling

Post by JamesOFarrell »

Check out CleanPipes instead -> https://forums.factorio.com/forum/vie ... 79&p=36430

Just a quick mod that adds 2 extra pipes to the game. East/West Pipes which only connect horizontally and North/South pipes that only connect vertically. They cost the same as normal pipes and are unlocked from the start like normal pipes. This idea for this mod came from this thread.

Image

The sprites are just recoloured pipe sprites and look a little funny when connecting to the normal pipes. If someone wants to make better looking sprites I will happily include them. Please... I hate looking at the green/blue pipes. I tried to draw an arrow on them but it just looked funny...

While I have tested with 0.9.8 the pipe entity this was based on was from 0.10.0 so there might be some issues relating to that. Let me know if anything crops up.

Updated to only green pipes. I also changed the recipe to be 1 pipe instead of 1 iron plate. Also now when mined the straight pipes will drop a normal pipe. Let me know what you think, I've kept both versions up if you prefer the old recipe/drop.

Downloads
Change Log
  • 0.0.1: Initial release
    0.0.2: Fixed conflict with DyTech
    0.0.3: Made all the pies green, changed recipe
Last edited by JamesOFarrell on Sat Nov 01, 2014 11:52 am, edited 5 times in total.
OBAMA MCLAMA
Filter Inserter
Filter Inserter
Posts: 337
Joined: Fri May 30, 2014 4:23 am
Contact:

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by OBAMA MCLAMA »

good job man, i think this will help a lot of the ocd people out there. I have personally wanted to place a straight pipe a couple times when doing some compact pipe stuff
When i stream twitch i always answer questions and try to help, come visit me.
JamesOFarrell
Filter Inserter
Filter Inserter
Posts: 402
Joined: Fri May 23, 2014 8:54 am
Contact:

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by JamesOFarrell »

I just cleaned up my current pipe works using these, it is a lot smaller now. Combined with the ability to walk between pipes in 0.10 our lives just got a lot easier when dealing with liquids.
theit8514
Inserter
Inserter
Posts: 47
Joined: Sun Apr 20, 2014 2:11 am
Contact:

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by theit8514 »

Looks like there's a conflict with DyTech...

DyTech|data.lua:31:
attempt to concatenate local 'colour' (a nil value)

Probably overrides the pipepictures function that DyTech uses.
JamesOFarrell
Filter Inserter
Filter Inserter
Posts: 402
Joined: Fri May 23, 2014 8:54 am
Contact:

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by JamesOFarrell »

theit8514 wrote:Probably overrides the pipepictures function that DyTech uses.
That was exactly it, I just renamed the function and it fixed the issue, thanks.
JamesOFarrell
Filter Inserter
Filter Inserter
Posts: 402
Joined: Fri May 23, 2014 8:54 am
Contact:

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by JamesOFarrell »

New version. Changed the recipe and removed the blue.
User avatar
darius456
Fast Inserter
Fast Inserter
Posts: 222
Joined: Thu Jan 02, 2014 6:33 am
Contact:

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by darius456 »

I prefer new version Thx.
Lenovo Y580 8GB Ram GF660m 128GB SSD W7
JamesOFarrell
Filter Inserter
Filter Inserter
Posts: 402
Joined: Fri May 23, 2014 8:54 am
Contact:

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by JamesOFarrell »

darius456 wrote:I prefer new version Thx.
No problem. Glad someone is using it.
User avatar
darius456
Fast Inserter
Fast Inserter
Posts: 222
Joined: Thu Jan 02, 2014 6:33 am
Contact:

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by darius456 »

JamesOFarrell wrote:
darius456 wrote:I prefer new version Thx.
No problem. Glad someone is using it.
Upload it on this forum you will have a download counter. By the way small mods im uploading here, but big ones on mediafire, also has counters.
Lenovo Y580 8GB Ram GF660m 128GB SSD W7
JamesOFarrell
Filter Inserter
Filter Inserter
Posts: 402
Joined: Fri May 23, 2014 8:54 am
Contact:

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by JamesOFarrell »

That's not a bad idea. This mod is small enough for a forum upload as well. Google drive is a bad habit I just can't seem to shake.
tetkris
Inserter
Inserter
Posts: 34
Joined: Mon Jun 02, 2014 7:50 am

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by tetkris »

very very useful :D i need this in vanila :D
Hagop
Burner Inserter
Burner Inserter
Posts: 5
Joined: Thu Jun 19, 2014 10:04 pm
Contact:

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by Hagop »

Does anyone know if this mod works with 0.10.X
User avatar
Ranakastrasz
Smart Inserter
Smart Inserter
Posts: 2171
Joined: Thu Jun 12, 2014 3:05 am
Contact:

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by Ranakastrasz »

I wonder if it is possible to make a rotate command cycle through the three states of a pipe. As in, vertical, horizontal, and all.
My Mods:
Modular Armor Revamp - V16
Large Chests - V16
Agent Orange - V16
Flare - V16
Easy Refineries - V16
JamesOFarrell
Filter Inserter
Filter Inserter
Posts: 402
Joined: Fri May 23, 2014 8:54 am
Contact:

Re: [MOD 0.9.x+] Straight Pipes - Easier liquid handling

Post by JamesOFarrell »

Hagop wrote:Does anyone know if this mod works with 0.10.X
It work with no issues in 0.10.x
Ranakastrasz wrote:I wonder if it is possible to make a rotate command cycle through the three states of a pipe. As in, vertical, horizontal, and all.
I had a bit of a play with that idea but couldn't get it to work. That said I didn't spend that long on it. It would be nice because then I could include corner pipes as well.
Colludo
Burner Inserter
Burner Inserter
Posts: 6
Joined: Fri Jun 20, 2014 10:55 am
Contact:

Re: [MOD 0.10.x+] Straight Pipes - Easier liquid handling

Post by Colludo »

Hello,

I transalate your Mod in German.

Greetings
Andy
Attachments
Straight Pipes-de.zip
(364 Bytes) Downloaded 180 times
JamesOFarrell
Filter Inserter
Filter Inserter
Posts: 402
Joined: Fri May 23, 2014 8:54 am
Contact:

Re: [MOD 0.10.x+] Straight Pipes - Easier liquid handling

Post by JamesOFarrell »

Colludo wrote:I transalate your Mod in German.
Thanks Andy, that's awesome. I've got to update for 0.10.1 so I'll put these in at the same time.
Turtle
Fast Inserter
Fast Inserter
Posts: 240
Joined: Sat May 31, 2014 9:45 pm
Contact:

Re: [MOD 0.10.x+] Straight Pipes - Easier liquid handling

Post by Turtle »

JamesOFarrell wrote:0.0.3: Made all the pies green, changed recipe
What flavor? :)
kisPocok
Burner Inserter
Burner Inserter
Posts: 15
Joined: Fri Jun 20, 2014 11:05 pm
Contact:

Re: [MOD 0.10.x+] Straight Pipes - Easier liquid handling

Post by kisPocok »

Wow, extremly helpful. Please, make it built-in feature to the game.
Post Reply

Return to “Mods”