Bugs & FAQ
Moderator: Arch666Angel
-
CitizenJoe
- Inserter
- Posts: 32
- Joined: Thu Mar 24, 2016 8:14 am
- Contact:
Re: Bugs & FAQ
Well, everyone else seems to be reporting all of the obvious issues, so I guess I'll bring up a smal nitpick. Why is the coloration on Bob's chemical plants removed?With the number of variations and the sheer number of them you end up using, being able to identify them at a glance is very useful.
Re: Bugs & FAQ
If you're playing with bob's mods, I'm 90% sure you'll need TONS of it for lubricant (and polishing compound) down the line. I'd keep storing it until you are certain that you won't end up needing it.aklesey1 wrote:Where to use big counts of base mineral oil?
The best option is to convert it to syntesis but i don't know where i need so many plastics
I can produce methanol with green catalysts but i'll need many many silver with aluminium, and then I precisely need jivolite with crotinjnium
As for the green catalysts, you don't need jivolite or crontinnium. Silver can be produced from lead oxide and nickel via one of bob's lead processing routes, and aluminum can be had from rubyte chunk sorting (among others). At the absolute worst case, you can just set up slag processing to make the ores needed for catalysts. Keep in mind that each ore produces 10 catalysts, so you don't need much ore to process tons of petrochems.
Re: Bugs & FAQ
The Green metal Catalysts used in making Nitric acid does not return the frames it uses as a by product?
Didnt know if that was intentional or not. But since Acid Gas returns its frames, thought i'd best check
Didnt know if that was intentional or not. But since Acid Gas returns its frames, thought i'd best check
-
DarkShadow44
- Filter Inserter
- Posts: 355
- Joined: Thu Jun 01, 2017 12:05 pm
- Contact:
Re: Bugs & FAQ
I too have a problem getting Fluid Splitters to work, is there a tutorial on how to set them up so they work? I can't pick a recipe for them, and they simply won't output anything.
Re: Bugs & FAQ
15.386 Factorio initialised
15.386 Mods to disable:Failed to load mods: __angelspetrochem__/data-updates.lua:1: __angelspetrochem__/prototypes/petrochem-generate.lua:3: attempt to call field 'make_splitter' (a nil value)
Mods to be disabled:
• angelspetrochem
15.386 Mods to disable:Failed to load mods: __angelspetrochem__/data-updates.lua:1: __angelspetrochem__/prototypes/petrochem-generate.lua:3: attempt to call field 'make_splitter' (a nil value)
Mods to be disabled:
• angelspetrochem
Re: Bugs & FAQ
Getting the exact same error msg.system wrote:15.386 Factorio initialised
15.386 Mods to disable:Failed to load mods: __angelspetrochem__/data-updates.lua:1: __angelspetrochem__/prototypes/petrochem-generate.lua:3: attempt to call field 'make_splitter' (a nil value)
Mods to be disabled:
• angelspetrochem
Re: Bugs & FAQ
Just updated and got the following error:
11.801 Error ModManager.cpp:930: Failed to load mod "angelssmelting": __angelssmelting__/data-updates.lua:2: __angelssmelting__/prototypes/smelting-generate.lua:7: attempt to call field 'make_barrel' (a nil value)
11.801 Error ModManager.cpp:930: Failed to load mod "angelssmelting": __angelssmelting__/data-updates.lua:2: __angelssmelting__/prototypes/smelting-generate.lua:7: attempt to call field 'make_barrel' (a nil value)
Re: Bugs & FAQ
i have clear install, and wanted to enable all angels and bobs, guess i'm mistting something
4.843 Error ModManager.cpp:948: Failed to load mod "angelssmelting": __angelssmelting__/data-updates.lua:2: __angelssmelting__/prototypes/smelting-generate.lua:7: attempt to call field 'make_barrel' (a nil value)
mods
edit: i see, i'm late with report Re: Bugs & FAQ
Just noticed that Angel pushed another update for Smelting to 0.3.3. This fixed the issue.mexmer wrote:i have clear install, and wanted to enable all angels and bobs, guess i'm mistting something
4.843 Error ModManager.cpp:948: Failed to load mod "angelssmelting": __angelssmelting__/data-updates.lua:2: __angelssmelting__/prototypes/smelting-generate.lua:7: attempt to call field 'make_barrel' (a nil value)modsedit: i see, i'm late with report
Edit: The error only occured when using Refining 0.7.13, Petrochem 0.5.9 with Smelting 0.3.2
Last edited by Catfight on Thu Jun 01, 2017 2:33 pm, edited 1 time in total.
-
Arch666Angel
- Smart Inserter
- Posts: 1636
- Joined: Sun Oct 18, 2015 11:52 am
- Contact:
Re: Bugs & FAQ
Try updating refining, petrochem and smelting to the latest.
Angels Mods
I. Angel's Mods Subforum
II. Development and Discussion
III. Bugs & FAQ
"should be fixed"
I. Angel's Mods Subforum
II. Development and Discussion
III. Bugs & FAQ
"should be fixed"
Re: Bugs & FAQ
Quick question:
Does updating your save games work fine when you install new versions? I assume some kind of migration script is used to add the new recipes that are added in each patch.
Mostly just curious as when i updated petrochem to 0.5.9 from 0.5.8, I got about fifty entries for migration changes were all of them were remove reciepes..
Does updating your save games work fine when you install new versions? I assume some kind of migration script is used to add the new recipes that are added in each patch.
Mostly just curious as when i updated petrochem to 0.5.9 from 0.5.8, I got about fifty entries for migration changes were all of them were remove reciepes..
Re: Bugs & FAQ
yeah, seems smelting was in process of upload, when i installed mods, because i had latest version from portal, but there is newer oneArch666Angel wrote:Try updating refining, petrochem and smelting to the latest.
-
Trainwreck
- Fast Inserter
- Posts: 110
- Joined: Wed Apr 05, 2017 2:17 am
- Contact:
Re: Bugs & FAQ
nodule-dissolution is still not researchable in refining 0.7.13. In 0.7.9 it was unlocked by researching water-washing. The water treatment technologies were tweaked in 0.7.10, and the unlock for nodule-dissolution seems to have gone missing then.
Re: Bugs & FAQ
Hi there, me again.
I hope I don't make a total fool out of me: Long Reach doesn't work since I've patched a few minutes ago. Long Reach is still the beginning version for .15, I think only Bob & Angel updates were loaded.
Thanks for your great work at this point, you're doing awesome things for factorio! Also I love the idea about liquid plastic!
Keep up the great work!
I hope I don't make a total fool out of me: Long Reach doesn't work since I've patched a few minutes ago. Long Reach is still the beginning version for .15, I think only Bob & Angel updates were loaded.
Thanks for your great work at this point, you're doing awesome things for factorio! Also I love the idea about liquid plastic!
Keep up the great work!
Re: Bugs & FAQ
Open Options -> Mods -> Map and change the 2 settings for long reach distance, apply them, and go back to the game. Then go into the same menu and change the settings back to the old value. Worked for me.Lapomita wrote:I hope I don't make a total fool out of me: Long Reach doesn't work since I've patched a few minutes ago. Long Reach is still the beginning version for .15, I think only Bob & Angel updates were loaded.
Re: Bugs & FAQ
Also worked for mecatpig wrote:Open Options -> Mods -> Map and change the 2 settings for long reach distance, apply them, and go back to the game. Then go into the same menu and change the settings back to the old value. Worked for me.
Thank you very much, mate!Re: Bugs & FAQ
Anyone else able to get Angels Infinite Ores to work? I have Infinite Ore spawning and I add Sulfuric Acid to the miners but then they just don't do anything after that.
Re: Bugs & FAQ
Question: I've heard factorio 0.15.17 broke a bunch of mods due to an intended change of the mod's options file. If I update my Angels mods now, do I need to be on 0.15.17/18, or do I need to be on an earlier version than that?
It was a bug. There was a simple fan-made fix posted earlier in this thread, but since Angel just updated the mods it may have been fixed in that.timer67 wrote:The Green metal Catalysts used in making Nitric acid does not return the frames it uses as a by product?
Didnt know if that was intentional or not. But since Acid Gas returns its frames, thought i'd best check
Re: Bugs & FAQ
Yes, he hasNewSwiss wrote:It was a bug. There was a simple fan-made fix posted earlier in this thread, but since Angel just updated the mods it may have been fixed in that.timer67 wrote:The Green metal Catalysts used in making Nitric acid does not return the frames it uses as a by product?
Didnt know if that was intentional or not. But since Acid Gas returns its frames, thought i'd best check
Re: Bugs & FAQ
Angels Infinite Ores:
data.lua
100 needs to be 1000.
My oil well that started with like 250% yield depleted at 5%, that shouldn't happen. It should deplete at 20% of initial value. It's because this 100 needs to be a 1000.
Also, because you set
all crude oil spots have 3x the normal yield. The vanilla "normal" is 300.000.
data.lua
Code: Select all
--OIL YIELD CHANGE MODIFIER
angelsmods.ores.oilyield = settings.startup["angels-oil-gas-yield"].value * 100My oil well that started with like 250% yield depleted at 5%, that shouldn't happen. It should deplete at 20% of initial value. It's because this 100 needs to be a 1000.
Also, because you set
Code: Select all
data.raw.resource["crude-oil"].normal = 100000