[MOD 1.1] Warehousing v0.4.0

[Arakami]

Ive downloaded this mod, got it installed, I can request the warehouses from the logistics network, but how in the hell do i craft them i dont see any option for this?

[vanatteveldt]

Thanks for the mod! I used it extensively in the past and will get back to it in my next base

Did you consider a 2x6 "longhouse" with limited storage (maybe equal to storehouse?) to ease train (un)loading?

[Nexela]

Ive downloaded this mod, got it installed, I can request the warehouses from the logistics network, but how in the hell do i craft them i dont see any option for this?

You need to research them.

[SquarelyCircle]

I placed an active provider warehouse over top of a full storage warehouse. The contents of the warehouse spilled on to the ground, filling my base. I'm not sure what can be done about this, but it is a serious problem as cleaning up that much copper is... well... a problem.

[vanatteveldt]

I placed an active provider warehouse over top of a full storage warehouse. The contents of the warehouse spilled on to the ground, filling my base. I'm not sure what can be done about this, but it is a serious problem as cleaning up that much copper is... well... a problem.

My advice would be to not do that next time

[kinnom]

I placed an active provider warehouse over top of a full storage warehouse. The contents of the warehouse spilled on to the ground, filling my base. I'm not sure what can be done about this, but it is a serious problem as cleaning up that much copper is... well... a problem.

deconstruction planner works on items too

[Anson]

I placed an active provider warehouse over top of a full storage warehouse.
The contents of the warehouse spilled on to the ground, ...

i had the same problem a while ago, but at that time there was another mod that increased the "item pickup distance" (default key F to pickup items). if you use the creative mode mod, you can extend that range too (personal cheat with that name).

as i wrote in the above post, i would mostly like to have a compatible warehouse with the same capacity to avoid this problem while building and rebuilding a lot, and maybe a second with the current larger capacity for a final ore depot. but of course that is completely up to the author to do it or not.

someone else with the same problem simply had edited the values in this mod, but as the author says this should only be done privately and the public version should be the same for all people who use the mod.

Did you consider a 2x6 "longhouse" with limited storage to ease train (un)loading?

i use two mods ... this mod for nice big storage with nice looks and the option to do nice inserter setups around it, and a second one for (un)loading trains on test setups if i am too lazy to do it properly with wired inserters to balance the steel chests. this second mod allows to join up to 42 chests in a vertical or horizontal line thus creating a single long chest with up to 2000+ stacks :-)
but on my real map, I'm using only this mod and set up stations properly using a blueprint which is just as easy.

[Optera]

Did you consider a 2x6 "longhouse" with limited storage to ease train (un)loading?

i use two mods ... this mod for nice big storage with nice looks and the option to do nice inserter setups around it, and a second one for (un)loading trains on test setups if i am too lazy to do it properly with wired inserters to balance the steel chests. this second mod allows to join up to 42 chests in a vertical or horizontal line thus creating a single long chest with up to 2000+ stacks
but on my real map, I'm using only this mod and set up stations properly using a blueprint which is just as easy.

I'd rather have a single 2x6 chest than seeing every possible chest in my logistic tabs.

Warehouses make for great item sorters when used together with loaders.

2017-01-13-12-46-31-5234569.jpg (578.03 KiB) Viewed 9165 times

I only wish there was an even bigger (size not inventory) one to use even more loaders on them. Maybe a 16x2 or 32x2 to replace the insane splitter based belt balancers.

[Anson]

I'd rather have a single 2x6 chest than seeing every possible chest in my logistic tabs.

true, but that depends on how the mod is written and probably could be improved by using the same trick as textplates to hide all those additional chests. or simply make a tab for those additional chests which is never used :-) we would have to ask that author.
such long chests could also be misused to teleport items, but that is up to the user what he does and what his own rules for limitations are.

there are also more mods which do similar, eg one mod that gives horizontal and vertical 1x6 chests (normal, and logistics, total of 10 such additional items in the crafting menu). i don't use it since i got some conflicts and other problems with it ...
and after i started having a first look at angels mods yesterday, i saw another 6x6 warehouse ...
for mass storage, there are also compression chests for unlimited storage ...
lots of options for everything related to storage :-)

but i still like the graphics of this mod best, and its reliability, no conflicts with the 100+ mods i have installed, the spilling of items when replacing storage, and the options to select between 3x3 and 6x6 give at least a small challenge to decide what is best suited, and keep me building better balancers for (un)loading stations with circuit wires ...

my use of warehouses as buffers for coal

Warehouses make for great item sorters when used together with loaders.

i often put a warehouse inline to some coal belts as a buffer :

coalbuffer.PNG (78.63 KiB) Viewed 9146 times

depending on amount of coal, speed of inserters and speed of belts,
i use normal chests 1x1, or warehouses 3x3 or 6x6.

the first two sides easily load the belt into the buffer and
the other two sides load the buffer to the belt,
using both lanes, thus also balancing the outgoing belt.

and if i get power problems and inserters no longer work,
the connection of ingoing and outgoing belts at the top right corner
guarantees that coal always continues to travel down the belt
(even on both lanes) without power ...

[rhekis]

It seems that requester warehouse will only request 20K of a single item, this is probably a known issue right?
http://steamcommunity.com/sharedfiles/f ... =865587792

Screenshot shows bots taking plates from off screen storage warehouse to top off requester warehouse only to 20K as belt slowly inches items forward. Instead of filling to 100K. Note total logistics storage of 146K copper plates... that should have filled the requester

[someone1337]

Now that factorio 0.15 is out... do you plan on updating this mod anytime soon?

[Zaflis]

There's unofficial update at https://mods.factorio.com/mods/kingarth ... sing%20v15

But there is 1 thing i'd recommend changing; make Logistics Warehousing tech require Logistics System. Because now you can cheat by having requester warehouses much earlier than requester chests.

[Philip017]

tips for changing code to resolve logistic warehouse tree

ultimately though, you still have to have the logistic system research done before you can make the logistic warehouses because it requires one of of the logistics chests as part of the warehouse recipe.

tips

changing "technology.lua"
default:
prerequisites = { "construction-robotics", "logistic-robotics", "warehouse-research" },
to:
prerequisites = {"logistic-system", "warehouse-research" },
will resolve the warehouse logistic before logistics system

but with the new research costs, i would also recommend adjusting the science costs to be more in line with the cost of researching the logistics system as well.

current:
count = 25,
{ "science-pack-1", 2},
{ "science-pack-2", 2},
{ "science-pack-3", 1}

recommend:
count =150,
{"science-pack-1", 1},
{"science-pack-2", 1},
{"science-pack-3", 1},
{"production-science-pack", 1},
{"high-tech-science-pack", 1}

thus costing the same as the logistics system,
if you wish to make it more expensive or cheaper then you can adjust those if desired

[kingarthur]

tips for changing code to resolve logistic warehouse tree

ultimately though, you still have to have the logistic system research done before you can make the logistic warehouses because it requires one of of the logistics chests as part of the warehouse recipe.

tips

changing "technology.lua"
default:
prerequisites = { "construction-robotics", "logistic-robotics", "warehouse-research" },
to:
prerequisites = {"logistic-system", "warehouse-research" },
will resolve the warehouse logistic before logistics system

but with the new research costs, i would also recommend adjusting the science costs to be more in line with the cost of researching the logistics system as well.

current:
count = 25,
{ "science-pack-1", 2},
{ "science-pack-2", 2},
{ "science-pack-3", 1}

recommend:
count =150,
{"science-pack-1", 1},
{"science-pack-2", 1},
{"science-pack-3", 1},
{"production-science-pack", 1},
{"high-tech-science-pack", 1}

thus costing the same as the logistics system,
if you wish to make it more expensive or cheaper then you can adjust those if desired

since Anoyomouse is still mia. im look into adjusting the science cost over the weekend. i just updated it quickly at first to just get it working while i was checking out .15

[Trashman992]

since Anoyomouse is still mia. im look into adjusting the science cost over the weekend. i just updated it quickly at first to just get it working while i was checking out .15

Thanks!
I'll check out your updated version.

[Anoyomouse]

Hey

Apparently i'm MIA ...

I haven't had the time to do anything factorio for a long while, Mark42XLII on github submitted a pull request to update the mod to 0.15

Thanks kingarthur for updating to mod, however, could you at least mention on the mod that it was originally done by me, i don't mind that you updated it and are doing moer to maintain it them i am

Also, if you could can you check your code into github or similar to share the love?

Anyways, version 0.0.11 of the original is going up now

Sorta an open call to anyone wanting to take over maintaining the mod (on github)?

[kingarthur]

Hey

Apparently i'm MIA ...

I haven't had the time to do anything factorio for a long while, Mark42XLII on github submitted a pull request to update the mod to 0.15

Thanks kingarthur for updating to mod, however, could you at least mention on the mod that it was originally done by me, i don't mind that you updated it and are doing moer to maintain it them i am

Also, if you could can you check your code into github or similar to share the love?

Anyways, version 0.0.11 of the original is going up now

Sorta an open call to anyone wanting to take over maintaining the mod (on github)?

Sorry my bad i meant to and must of forgot to readd the credit when the mod portal broke the first time i tried to upload it. how do i put the code on github

[dgw]

how do i put the code on github

Step 1: Go here: https://github.com/Anoyomouse/Warehousing
Step 1.1: Log in or make an account if you need to
Step 2: Click the "Fork" button at the top right
Step 3: I'm actually going to hand off to GitHub's own documentation at this point: https://help.github.com/articles/fork-a-repo/ (They also have instructions for setting up git, and other steps that don't pertain specifically to forking a project but will have to be done if your environment isn't set up for it.)

There's also the option for someone else (like me) to fork Anoyomouse's repo, apply the changes, but mark the updates as authored by you (kingarthur). Happy to help with that method, too, if setting up git is more than you want to deal with—but I hope you will, because once it's done you're a lot more free to contribute to other code projects (since the environment will be already set up to support doing so).

[kingarthur]

Just forked warehousing. i think? and posted the changes i had made got super distracted lately and had kinda forgot to do that

[dgw]

Just forked warehousing. i think? and posted the changes i had made got super distracted lately and had kinda forgot to do that

I found what appears to be your fork and looked at the changes… It appears you changed the line endings for each one of some 28 files. That makes the diff pretty impossible to sort through.

You'll also probably want to make your changes on a new branch other than master