[Mod 0.14+] Concrete Edges 1.2.1 - Straight Concrete edges

[Mooncat]

Type: Mod
Name: Concrete Edges
Description: Inspired by the new concrete tileset shown in FFF #120, this mod adds diagonal edges to concrete.
License: Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
Version: 1.2.1
Release: 2016-08-31
Tested-With-Factorio-Version: 0.14.2
Category: (Non-Game-Changing)
Tags: concrete, edges, diagonal, fff-120
Download-Url: https://mods.factorio.com/mods/Mooncat/concrete-edges
Website: viewtopic.php?f=97&t=29030

License

Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)

You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Long description

Edit (Important):
For the official tileset, I asked a Factorio staff. It turns out the tileset was not cancelled!!!! It is just still under development.
Looking back to FFF #120, there was really not word mentioning the tileset would be in 0.13. What a silly mistake.
That said, it is still their game. They can do any changes to their plans. So don't put pressure to anymore if things change.
And before their tileset is ready, you can still use this mod as a placeholder.
---

"Did they cancel the new concrete tileset just because 4 or 5 people complained about it?" It was the question in my mind since I have known there is no new concrete tileset for 0.13. People have discussed about this. I have also asked if the devs can provide the tileset as a mod. But they seem to be too busy on fixing bugs and developing the tank wagon. Anyway, this is my mod now (evil smile).

Concrete.png (1.76 MiB) Viewed 11215 times

Concrete_Straight.png (1.6 MiB) Viewed 11172 times

Note: by default, it uses the Concrete with straight edges. But you can turn it off in config.lua so the irregular edges will be used instead.

HazardConcrete.png (2.12 MiB) Viewed 11215 times

This mod simply replaces the graphics of concrete edges. No change on recipe. No new terrain.
I did this with my poor Photoshop skill, so feel free to provide better graphics if you feel this is ugly.
(Still looking forward to the official tileset. People who complained they are not Factorio-like simply don't understand the style of Factorio.)

Vote for the tileset

I have added a poll about the official tileset. Feel free to show your thought on it. Also, there is an option for having the tileset to be a new tile instead of replacing the existing concrete. If there are more people choosing this option, I will change this mod to fit it.

Version history

Version 1.2.1 (Aug 31):

• Updated for Factorio 0.14.

Version 1.2.0 (Jul 22):

• Added the option for having Concrete with straight edges.

Version 1.1.0 (Jul 21):

• Added edges for Hazard Concrete.
• Fixed the oversized corners of Concrete.

Version 1.0.0 (Jul 15): The first version.

Known issues

---

Future development

Color Coding support? (maybe)

Color coding

About the support for Color Coding, I think we better finalise the tileset first. And I also think that it is better to have Color Coding supports this mod instead, so it can control the colors. I will be happy to provide the colored tilesets or even code for adding support once everything is ready.
But let's see whether it is worth doing.

[Optera]

How would diagonal edges behave if they border stone?
It would look nice if that results in half stone half concrete tiles.

How would Hazard Concrete look and behave?

[Mooncat]

How would diagonal edges behave if they border stone?
It would look nice if that results in half stone half concrete tiles.

How would Hazard Concrete look and behave?

Do you mean this?

Stone + Concrete

Screen Shot 2016-07-15 at 2.53.05 PM.png (70.45 KiB) Viewed 11469 times

I just changed the graphics, so it is the default behaviour of Factorio.

I totally forgot the Hazard Concrete.
Now, I am thinking how the edges of hazard concrete should look like. For normal concrete, I think it is like you dumped buckets of melted concrete and let it dry, so the edges are not straight. But for harzard concrete, I think straight edges are more suitable. What do you think?

[Optera]

How would diagonal edges behave if they border stone?
It would look nice if that results in half stone half concrete tiles.

How would Hazard Concrete look and behave?

Do you mean this?

Screen Shot 2016-07-15 at 2.53.05 PM.png

I just changed the graphics, so it is the default behaviour of Factorio.

I totally forgot the Hazard Concrete.
Now, I am thinking how the edges of hazard concrete should look like. For normal concrete, I think it is like you dumped buckets of melted concrete and let it dry, so the edges are not straight. But for hazard concrete, I think straight edges are more suitable. What do you think?

That does look better than i thought. It's a slow field without tiles in reality though? So walking over that border would be noticeably slower than stone or concrete.

Hazard Concrete should defiantly have a straight diagonal. It may look odd to have the border run parallel to the stripes.

[Mooncat]

How would diagonal edges behave if they border stone?
It would look nice if that results in half stone half concrete tiles.

How would Hazard Concrete look and behave?

Do you mean this?

Screen Shot 2016-07-15 at 2.53.05 PM.png

I just changed the graphics, so it is the default behaviour of Factorio.

I totally forgot the Hazard Concrete.
Now, I am thinking how the edges of hazard concrete should look like. For normal concrete, I think it is like you dumped buckets of melted concrete and let it dry, so the edges are not straight. But for hazard concrete, I think straight edges are more suitable. What do you think?

That does look better than i thought. It's a slow field without tiles in reality though? So walking over that border would be noticeably slower than stone or concrete.

Hazard Concrete should defiantly have a straight diagonal. It may look odd to have the border run parallel to the stripes.

Walking over the boarder is slow because there is actually no stone or concrete on these grids. Think of placing 2x2 stone or concrete on the ground, the 4 edges will extend to the surrounding grids. With diagonal edges, they visually extend further, but it doesn't change the fact that the grids are still not covered by stone or concrete. You can consider covering these grids by stone or concrete, but it will change the position of the boarder.

OK, I will go for straight edges.

[Mooncat]

Took me some time to figure out how to make it look not too ugly.
(Ignore the missing bits between grids, not finished yet.)

HarzardConcrete.png (919.78 KiB) Viewed 11406 times

But it is just 1 of 10 images that need to change. And I will be quite busy tmr, so... please bear with me.

[Optera]

This starts to look so good I wouldn't be surprised to see it integrated in base.

[Mooncat]

This starts to look so good I wouldn't be surprised to see it integrated in base.

hahaha, thanks.


Oh no! Someone voted No!!!!! NOOOOOOOOOO (panic mode)

[Mooncat]

To anyone who will try to create a custom tile and mess with the corner image:

Dang.png (341.12 KiB) Viewed 11279 times

It turns out the corner image is restricted to quite a small area. As you can see in the above image, I used a totally white image for the corner but only a small square is shown instead of a whole 1x1 white tile.
Now I have to redo all the edges because of the unexpected cropping effect on the corners. (cry)

As the result, no more thick shadow effect. Only a thin stroke is allowed:

Now.png (389.67 KiB) Viewed 11278 times

Edit: but I think it is too cartoonish now... :/

[steinio]

Looks good but there should be no visible borders of the tiles because hazard areas are painted not tiled.

[Mooncat]

Looks good but there should be no visible borders of the tiles because hazard areas are painted not tiled.

Did you mean the black borders or the lines between each tile?

I have toned down the darkness of the border and I am quite satisfied now

LookingGood.png (2.06 MiB) Viewed 11049 times

I think I can finish the other half set of images and publish it tomorrow.

[steinio]

I mean the lines between the tiles.

But so it also looks nice,

[Mooncat]

I mean the lines between the tiles.

But so it also looks nice,

But the lines are in the default texture. I only changed the images of edges.

[Mooncat]

Sorry for having a little bit delay.
Version 1.1.0 is ready!
And make sure you have read the edited part of the long description.

[Neotix]

Could you make version with concrete that have regular edges like hazard concrete?

[Mooncat]

Could you make version with concrete that have regular edges like hazard concrete?

As long as you trust my drawing skill, why not?
Version 1.2.0 released!

Now there is config.lua to switch between irregular edges or straight edges. By default, it uses straight edges.
(Originally I wanted to use irregular edges by default, but I forgot to change it back after testing. I have to admit that straight edges look nice, so let's forget about it. )

[Neotix]

It looks great, thanks.

[Mooncat]

It looks great, thanks.

You're welcome.

[Mooncat]

Released a small update: v1.2.1 - updated for Factorio 0.14.

[BlackHat]

Has .15 eliminated the need for this mod? or is this also going to be updated?