[MOD 0.17.x]Factorio Extended 4.0103.17

[cajuninabox]

I'm not sure if it's a recent update, but I can no longer craft anything from the weaponry mod. I tried toggling the recipes to enabled = true and reloading the game, but that didn't work. I also tried the recipes console command from the faq, and that didn't work either. Any ideas?

edit: So apparently I forgot to check the factorio basics tab of the inventory. Eh... heh. Problem solved.

[zytukin]

Love this mod, especially the high end power poles and substations.
Started a new map with this and a few other mods so haven't made much use of other stuff in it yet except for spawning via console just to check out the items.

One thing I notice is that the Fast Inserter MK3 is almost the same shade of blue as the regular Fast Inserter, but the icon for it in the craft menu shows a purple inserter. So I decided to change it a bit in my game. Nothing fancy, just adjusted the red, blue, and brightness/contrast a bit in the textures to make it closer to the craft menu icon and easily stand out from the standard fast inserter. Top inserters in the pic are regular fast inserters, bottom ones are the MK3.

fast-inserter-mk3.rar

(10.8 KiB) Downloaded 162 times

mk3.jpg (29.21 KiB) Viewed 7657 times

[Leosmellsgood]

Hey im loving this mod really well done but the only qualm i have is that i was looking for a miner/drill upgrade/improvement and that was strangely not part of the implements..? I feel like thats the only possible negative feedback xD really good mod loving it, extends the game perfectly

[Anson]

The description of the mod sounds very nice,
and i just downloaded it (but didn't test it yet).

here are some notes of what looked a bit strange to me in the first post (for version 0.1.5, factorio 0.12.33) :

All items in blue are vanilla Factorio items so you can compare and contrast.

Long Handed Inserter (Extention-Speed: 0.0457, ..., Smart-Functionality: False)
-Fast Long Handed Inserter (Extention-Speed: 0.08, ..., Smart-Functionality: False)
-Smart Long Handed Inserter (Extention-Speed: 0.07, ..., Smart-Functionality: True)

very nice to have those blue comparisons and a list of all items with their values right in the first post!

the new inserters are quite a bit faster than vanilla, but the smart version is slower than the nonsmart version.
is that intended ?
I always like to be able to select an upgrade, or to use "just the best" (if i have enough resources to make them, and enough energy to power them) without need to check all the details and without having to replace them back and forth to have either the max speed or temporarily use the filter option or networking capabilities (restrict amount of items in a chest, etc)

Medium Electric Pole (Supply Area: 7x7, Wire Reach: 9)
-Medium Electric Pole Mk2 (Supply Area: 14x14, Wire Reach: 14)
-Medium Electric Pole Mk3 (Supply Area: 18x18, Wire Reach: 18)

Big Electric Pole Mk2 (Supply Area: 4x4, Wire Reach: 30)
-Big Electric Pole Mk2 (Supply Area: 4x4, Wire Reach: 60)
-Big Electric Pole Mk3 (Supply Area: 4x4, Wire Reach: 120)

Substation (Supply Area: 14x14, Wire Reach: 14)
-Substation Mk2 (Supply Area: 28x28, Wire Reach: 28)
-Substation Mk3 (Supply Area: 56x56, Wire Reach: 56)[/size]

doubling the reach for the mk2/3 while keeping the area the same sounds very reasonable for the big poles, but doesn't the same strategy make the substations a bit op ? with the given values for reach, you almost can replace big poles mk1(vanilla) by substations mk2 (30 vs 28), and big poles mk2 by substations mk3 (60 vs 56), and get their enormous area at the same time (area = reach² instead of constant 4²). maybe for big poles, the reach should increase linearly, and for substations the area should increase linearly (14x14=196 area for mk1, 20x20~=392 for mk2, 28x28=784 for mk3, with reach accordingly set to 14/20/28).
as i said above, i just downloaded it and didn't test it yet, but that was my first impression when reading the values.

the medium poles also look a bit strange: their reach is not bigger than the edge length of their area, and the medium mk2 has identical area and reach to the vanilla substation (much larger than the vanilla medium), while the mk3 is only a little bigger than the mk2.
the small vanilla poles have area 5x5 with reach 7.5, causing the areas of diagonally placed poles to barely touch, and the medium poles have area 7x7 with reach 9, causing such diagonally placed areas to overlap by a single tile. extending that sequence, i would have assumed that the edge length increases much less, to an area like 9x9 (with reach 12.5) for mk2, and 11x11 or 13x13 (with reach 15.5) for mk3. maybe even 5 (+2) 7 (+4) 11 (+6) 17 (with reach 7.5/9/14.5/20.5, to have similar overlap of 0/1/2/3 tiles on diagonals), but not 5 (+2) 7 (*2) 14 (+4) 18, and most of all also keeping the game mechanics for poles (in contrast to substations) of values for reach being bigger than values for area (edge length).

pictures of areas and reaches

in the following pictures, yellow marks the location of one existing pole, green marks possible locations for the next small pole, orange for the next medium pole, blue for 11x11 with reach 14.5 and red for 17x17 with reach 20.5 (btw: the additional 0.5 reach allow for a slight deviation from putting poles with maximum reach, not only exactly horizontally or vertically).

i always find bugs/features - this time in the BB software: any kind of code inside spoilers seems to influence the font type and/or size, as can be seen by the colored text or the bold "only exactly", or to the extreme on this entire line which is written with italics and bold, turning it into subscript(?).

pole-reach.PNG (90.36 KiB) Viewed 7556 times

the following is the corresponding picture for the areas and by how much they would overlap: yellow for the poles themselves, green for small poles, orange for medium poles, blue for area 11x11 (reach 14.5), and red for area 17x17 (reach 20.5)

pole-area.PNG (191.27 KiB) Viewed 7556 times

for the following items, i assume that these are typing errors ?

list of a lot of possible typing errors

Logistics Robot (Carry Capacity: 1, Max Health: 300, Speed: 0.18, Energy Consumption: 600W + 1kJ/m)
-Logistics Robot Mk2 (Carry Capacity: 3, Max Health: 100, Speed: 0.05, Energy Consumption: 480W + 800J/m)
Construction Robot (Carry Capacity: 1, Max Health: 100, Speed: 0.06, Energy Consumption: 600W + 1kJ/m)
-Construction Robot Mk2 (Carry Capacity: 3, Max Health: 300, Speed: 0.18, Energy Consumption: 480W + 800J/m)

did you accidentally exchange some values for mk1 and mk2 ?
for the logistic bots mk2: triple capacity, but a third of health and less than a third of speed would be no advantage, except having less robots for the same throughput, and only while the robots have no other capacity bonus (eg with bonus+9: capacity 10 vs 12, but still at a third of speed)
the construction bots have better values, tripling all values including health 100 -> 300 instead of 300 -> 100, and speed 3*0.06=0.18 instead of 0.18/3.5=0.05

Personal Roboport (Dimensions: 2x2, Transmission: 4.0kW, Robot Recharge Rate: 2 x 200kW, Internal Buffer Recharge Rate: 700kW, Robot Limit: 10, Charging Stations: 2, Construction Area: 30x30)
-Personal Roboport Mk2 (Dimensions: 2x2, Transmission: 6.0kW, Robot Recharge Rate: 2 x 800kW, Internal Buffer Recharge Rate: 1.4MW, Robot Limit: 25, Charging Stations: 4, Construction Area: 60x60)[/size]

looks nice in general, and even has 4 charging stations for the increased number of bots, but the recharge rate probably should be also "4 x" instead of "2 x" ...

Radar (Distance: , Energy-Consumption: )
-Radar Mk2 (Distance: , Energy Consumption: 300kW)

here and on some other items, some values are missing ...

Electric Mining Drill (Mining Power: 3, Mining Speed: 0.5, Mining Area: 5x5, Energy-Consumption: 90kW)
-Electric Mining Drill Mk2 (Mining Power: 3, Mining Speed: 0.5, Mining Area: 5x5, Energy-Consumption: 90kW)[/size]
Laser Turret (Health: 1000, Range: 25, Shooting-Speed: 3 + 4.8/s, Energy-Consumption: 2.4MW, Damage: )
-Laser Turret Mk2 (Health: 1000, Range: 25, Shooting-Speed: 3 + 4.8/s, Energy-Consumption: 2.4MW, Damage: 40 + 48 Laser)

i see no improvement on the mk2, compared to mk1.
did you copy&paste and then forgot to adjust the values ?

Piercing Shotgun Shell (Damage: 16 x (6 + 7.2 Physical), Magazine-Size: 10)
-Shattering Shotgun Shell (Damage: 24 x (6 + 7.2 Physical), Magazine-Size: 20)

50% more bullets in shattering shells, and 100% more shells in a magazine, but in contrast to the shattering bullets for guns, the damage for each of them is only the same ?

-Transport Engineer 1 and 2 : (Unlocks: ..., Rapid Slitter Mk1/2)

finally some kind of chainsaw to fight the critters "with style" ?
can we use those transort items as weaons ?


anyway, i hope to see all those nice items (and more) also after we get 0.13.

thanks a lot for all the work and expansion.

[TheWesDude]

i really hope this mod gets updated when .13 gets released because if it does, after i get a normal game or 2 in i would probably stream this

[NathGamer]

Thank you all for your suggestions and support it mean a lot to me. A couple of thinks to note are.

1. I do plan to update to 0.13.x
2. I am still balancing and add to the mod it is NOT finished
3. Any suggestions you have are always welcome

Thank you all again and I hope you all have a great day.

[Nebbeh]

Just a question, is there an easy way for me to remove what I dont want from the packs? I am using Bob's and would really like just certain items from some of your packs. Other than that awesome mods

[Catts]

Just wanted to say thanks for making and updating this mod. This mod is a must-have for me and I haven't been able to play 0.13 without it.

[Nebbeh]

Thanks for the update! Any eta on weaponry?

[m2cengine]

I'm getting an error when I installed core/equip/logistics/machines/power/weaponry from the in-game addon browser. Game version 13.6

Error is:

Error in assignID, item with name 'pipe-mk2' does not exist.

[NathGamer]

I'm getting an error when I installed core/equip/logistics/machines/power/weaponry from the in-game addon browser. Game version 13.6

Error is:

Error in assignID, item with name 'pipe-mk2' does not exist.

Hi sorry about this, I forgot that I added a recipe with an item from a different component and forgot to add the logic in for it. Here are the new versions of the core/machine component. Just download these ones and replace them with the ones in your mods folder and the problem should be fixed. I also replaced the ones on the website so people don't have the problem in the future.

Core
Machines

Thank you for telling me about this so I could fix it.

[m2cengine]

Thanks for the quick update! Works - will definitely try this mod once I'm done with my current game.

[NathGamer]

Thanks for the quick update! Works - will definitely try this mod once I'm done with my current game.

No problem I am glad that it was caught, and I hope that enjoy my mod. :D

[meAndmyself]

First of all thank you for all the hard work on the mod. I've enjoyed playing with it very much.

The nerfing in the latest release though is kind of frustrating. Your reduced range of the power poles and roboports basically means that my entire base is broken and has to be reworked, which is a not very enjoyable process at all. Of course I could edit the mod files, but then I have to do that on every release, which is also not enjoyable. So I would like to ask you if you can find it in your heart to reconsider the nerfing because for me at least neither spamming more power poles nor spamming more roboports all over the place actually improves the enjoyment in playing Factorio.

[NathGamer]

First of all thank you for all the hard work on the mod. I've enjoyed playing with it very much.

The nerfing in the latest release though is kind of frustrating. Your reduced range of the power poles and roboports basically means that my entire base is broken and has to be reworked, which is a not very enjoyable process at all. Of course I could edit the mod files, but then I have to do that on every release, which is also not enjoyable. So I would like to ask you if you can find it in your heart to reconsider the nerfing because for me at least neither spamming more power poles nor spamming more roboports all over the place actually improves the enjoyment in playing Factorio.

I am planning on adding more tiers of the substation and robots and robotports in the next update so was preparing for that I do apologize for the inconvenience.

[ShEsHy]

I get this error at launch with mod version 0.1.9 and Factorio version 0.13.11:

Code: Select all

Error Util.cpp:58: Failed to load mod "FactorioExtended-Transport 0.1.9"
__FactorioExtended-Transport__/data.lua:8: ...ended-Transport__/prototypes/entity/entity-transport.lua:724: attempt to call global 'get_circuit_connector_sprites' (a nil value)

[NathGamer]

I get this error at launch with mod version 0.1.9 and Factorio version 0.13.11:

Code: Select all

Error Util.cpp:58: Failed to load mod "FactorioExtended-Transport 0.1.9"
__FactorioExtended-Transport__/data.lua:8: ...ended-Transport__/prototypes/entity/entity-transport.lua:724: attempt to call global 'get_circuit_connector_sprites' (a nil value)

Looking into it. Thanks

[tetkris]

mod do not work with 0.13.11 version , I do not tried earlier versions

[ShEsHy]

I get this error at launch with mod version 0.1.9 and Factorio version 0.13.11:

Code: Select all

Error Util.cpp:58: Failed to load mod "FactorioExtended-Transport 0.1.9"
__FactorioExtended-Transport__/data.lua:8: ...ended-Transport__/prototypes/entity/entity-transport.lua:724: attempt to call global 'get_circuit_connector_sprites' (a nil value)

Looking into it. Thanks

Please ignore that. I was being an idiot and didn't set Steam to download experimental versions, so it was still on 0.12.35. Set it to download experimental now and the game starts fine on 0.13.13.

[NathGamer]

I get this error at launch with mod version 0.1.9 and Factorio version 0.13.11:

Code: Select all

Error Util.cpp:58: Failed to load mod "FactorioExtended-Transport 0.1.9"
__FactorioExtended-Transport__/data.lua:8: ...ended-Transport__/prototypes/entity/entity-transport.lua:724: attempt to call global 'get_circuit_connector_sprites' (a nil value)

Looking into it. Thanks

Please ignore that. I was being an idiot and didn't set Steam to download experimental versions, so it was still on 0.12.35. Set it to download experimental now and the game starts fine on 0.13.13.

Great to hear.