[0.13.0] Spawners spawn far too close
-
- Burner Inserter
- Posts: 16
- Joined: Tue Jun 28, 2016 2:15 am
- Contact:
[0.13.0] Spawners spawn far too close
See images below for issue.
Started my first non-peaceful game (just launched a rocket on peaceful). I switched to hostile enemies. After a bit, two spawners spawned literally in my base.
Started my first non-peaceful game (just launched a rocket on peaceful). I switched to hostile enemies. After a bit, two spawners spawned literally in my base.
Re: [0.13.0] Spawners spawn far too close
I can report the same thing. A Biter spawner and a big worm set up camp near my initial coal deposit
DT-Extend - DyTech ores and other things.
Re: [0.13.0] Spawners spawn far too close
Would you consider adding a setting like 'enemy aggression' instead of simply fixing/changing this? I kinda like the idea of the aliens trying to take back what was theirs.
Re: [0.13.0] Spawners spawn far too close
Not a bug. Set up defences if you don't want aliens in your base.
-
- Long Handed Inserter
- Posts: 53
- Joined: Fri Apr 15, 2016 9:02 am
- Contact:
Re: [0.13.0] Spawners spawn far too close
Not a bug? If that's so then that's horrible intended behaviour. How do you set up defenses when the things can spawn anywhere they like including inside your base?
Re: [0.13.0] Spawners spawn far too close
You place some turrets. Also they don't spawn, they migrate. If you don't allow them to get inside your base, they won't get in. If you do allow them to get in, too bad.nonstickfrypan wrote:Not a bug? If that's so then that's horrible intended behaviour. How do you set up defenses when the things can spawn anywhere they like including inside your base?
-
- Long Handed Inserter
- Posts: 53
- Joined: Fri Apr 15, 2016 9:02 am
- Contact:
Re: [0.13.0] Spawners spawn far too close
So you set up 1000 turrets around the outside of your base/outpost/whatever and somehow one slips through the defenses (obviously you have to kill it otherwise it'll just keep destroying stuff) and suddenly they can migrate inside an already built "zone"?Oxyd wrote:You place some turrets. Also they don't spawn, they migrate. If you don't allow them to get inside your base, they won't get in. If you do allow them to get in, too bad.nonstickfrypan wrote:Not a bug? If that's so then that's horrible intended behaviour. How do you set up defenses when the things can spawn anywhere they like including inside your base?
Edit: If that's the case then where do you set up these additional turrets? Next to every factory/inserter/power pole?
Re: [0.13.0] Spawners spawn far too close
I set up turrets around my outposts and have turret clusters on places on the perimeter of my main base where attacks have happened or I suspect they might happen.
In your case, just placing a few turrets around those miners should work just fine – I'd probably place around four turrets, one in each corner. If you had those turrets in place, they would attack the biters before they could set up a new base.
In your case, just placing a few turrets around those miners should work just fine – I'd probably place around four turrets, one in each corner. If you had those turrets in place, they would attack the biters before they could set up a new base.
Re: [0.13.0] Spawners spawn far too close
Build a perimeter with overlapping turret range around the base or the part that faces enemies, if there are too many enemies, reduce the settings.nonstickfrypan wrote:So you set up 1000 turrets around the outside of your base/outpost/whatever and somehow one slips through the defenses (obviously you have to kill it otherwise it'll just keep destroying stuff) and suddenly they can migrate inside an already built "zone"?Oxyd wrote:You place some turrets. Also they don't spawn, they migrate. If you don't allow them to get inside your base, they won't get in. If you do allow them to get in, too bad.nonstickfrypan wrote:Not a bug? If that's so then that's horrible intended behaviour. How do you set up defenses when the things can spawn anywhere they like including inside your base?
Edit: If that's the case then where do you set up these additional turrets? Next to every factory/inserter/power pole?
-
- Long Handed Inserter
- Posts: 53
- Joined: Fri Apr 15, 2016 9:02 am
- Contact:
Re: [0.13.0] Spawners spawn far too close
I guess what I'm asking is that, apart from turrets, can you stop the enemies from "migrating" like in 0.12.x by building something?
- 5thHorseman
- Smart Inserter
- Posts: 1193
- Joined: Fri Jun 10, 2016 11:21 pm
- Contact:
Re: [0.13.0] Spawners spawn far too close
Do they actually migrate, or does the game spawn a new base somewhere near another base? I mean, was new base spawning changed to maybe only occur at the location of a current biter?
If so, that's awesome. Especially if some biters are actually "base makers" that actually wander around looking for a suitable base (or at least randomly walk to a new place to set up a base).
If not, can a new base spawn "near" an old base, but across your defensive lines? That doesn't sound all that kosher but it will make collecting alien artifacts easier
If so, that's awesome. Especially if some biters are actually "base makers" that actually wander around looking for a suitable base (or at least randomly walk to a new place to set up a base).
If not, can a new base spawn "near" an old base, but across your defensive lines? That doesn't sound all that kosher but it will make collecting alien artifacts easier
Re: [0.13.0] Spawners spawn far too close
They have to migrate – nothing's changed about this aspect since prevoius versions. Only which chunks they're allowed to migrate to.5thHorseman wrote:Do they actually migrate, or does the game spawn a new base somewhere near another base? I mean, was new base spawning changed to maybe only occur at the location of a current biter?
If so, that's awesome. Especially if some biters are actually "base makers" that actually wander around looking for a suitable base (or at least randomly walk to a new place to set up a base).
If not, can a new base spawn "near" an old base, but across your defensive lines? That doesn't sound all that kosher but it will make collecting alien artifacts easier
Re: [0.13.0] Spawners spawn far too close
I never did the "Victory Post" thing myself as it seemed a bit too cheaty for my taste, but I've heard it mentioned a fair amount by YouTubers and such. Examining the debug output of show_enemy_expansion_chunks and the new show_enemy_expansion_chunks_values shows minor objects seem to only reduce the chance for a chunk to be an expansion candidate by a small amount where as large, enclosed areas prevent it entirely. Rather than the former behavior of simply disallowing any new bases from spawning in a particular area. Which leads to the result of chunks on the perimeter of bases being candidates for expansion. Interesting.Oxyd wrote:They have to migrate – nothing's changed about this aspect since prevoius versions. Only which chunks they're allowed to migrate to.5thHorseman wrote:Do they actually migrate, or does the game spawn a new base somewhere near another base? I mean, was new base spawning changed to maybe only occur at the location of a current biter?
If so, that's awesome. Especially if some biters are actually "base makers" that actually wander around looking for a suitable base (or at least randomly walk to a new place to set up a base).
If not, can a new base spawn "near" an old base, but across your defensive lines? That doesn't sound all that kosher but it will make collecting alien artifacts easier
This seems like it may lead to some very dense biter bases in the wild over time as chunks right on top of other bases are still allowed to be considered expansion candidate chunks.
Re: [0.13.0] Spawners spawn far too close
That is not true, actually. There is still the mechanic that an expansion candidate chunk has to be within 7 chunks of any already existing base. This is so that the migration distances are kept reasonable and biters don't just randomly migrate across the entire map. So what you're seeing is that the middle of your factory isn't within 7 chunks of any other biter base.ixnorp wrote:large, enclosed areas prevent it entirely.
-
- Fast Inserter
- Posts: 247
- Joined: Wed Mar 02, 2016 10:09 pm
- Contact:
Re: [0.13.0] Spawners spawn far too close
Lots of walls.nonstickfrypan wrote:I guess what I'm asking is that, apart from turrets, can you stop the enemies from "migrating" like in 0.12.x by building something?
- 5thHorseman
- Smart Inserter
- Posts: 1193
- Joined: Fri Jun 10, 2016 11:21 pm
- Contact:
Re: [0.13.0] Spawners spawn far too close
Oxyd wrote:They have to migrate – nothing's changed about this aspect since prevoius versions. Only which chunks they're allowed to migrate to.5thHorseman wrote:Do they actually migrate, or does the game spawn a new base somewhere near another base?
I think I'm misunderstanding migrating. For you, does "migrating" and "spawn a new base somewhere near another base" mean exactly the same thing?Oxyd wrote:There is still the mechanic that an expansion candidate chunk has to be within 7 chunks of any already existing base. This is so that the migration distances are kept reasonable and biters don't just randomly migrate across the entire map. So what you're seeing is that the middle of your factory isn't within 7 chunks of any other biter base.
I don't actually know how it used to work. I'm fairly new (I don't even have triple digit hours into the game yet!) and currently my only interaction with biters is that they attack my stuff and I attack their stuff.
Re: [0.13.0] Spawners spawn far too close
It means, that enemy bases don't just pop into existence. A biter has to "plant" the new enemy base, if there are turrets it will fight and (hopefully) die instead and no base will be created.5thHorseman wrote: I think I'm misunderstanding migrating. For you, does "migrating" and "spawn a new base somewhere near another base" mean exactly the same thing?
I don't actually know how it used to work. I'm fairly new (I don't even have triple digit hours into the game yet!) and currently my only interaction with biters is that they attack my stuff and I attack their stuff.
- 5thHorseman
- Smart Inserter
- Posts: 1193
- Joined: Fri Jun 10, 2016 11:21 pm
- Contact:
Re: [0.13.0] Spawners spawn far too close
Okay cool so a factory surrounded by turrets and/or walls is totally safe from a spontaneous biter base appearing right next to your oil pumps. Thank you. And that's a cool mechanic and exactly what I wanted. I won't say I never used victory poles, but I will say I never liked itLoewchen wrote:It means, that enemy bases don't just pop into existence. A biter has to "plant" the new enemy base, if there are turrets it will fight and (hopefully) die instead and no base will be created.
Re: [0.13.0] Spawners spawn far too close
migrating means that a group of biters will go to a place suitable for expansion, and wait there, if they are left alone the spawners spawn. Once in a while I check the map for any red dots in places where they shouldn't be and wipe them out before they put down roots so to speak.5thHorseman wrote: I think I'm misunderstanding migrating. For you, does "migrating" and "spawn a new base somewhere near another base" mean exactly the same thing?
I don't actually know how it used to work. I'm fairly new (I don't even have triple digit hours into the game yet!) and currently my only interaction with biters is that they attack my stuff and I attack their stuff.
Re: [0.13.0] Spawners spawn far too close
You can always just enable peaceful mode or disable biters completely if you don't want to fight them.
If you want to get ahold of me I'm almost always on Discord.