Maybe because it is not a crane, but overhead rail signal?Serge wrote:nah, the crane has to be a liquid loader. Otherwise, why would it have a crane?
Friday Facts #142 - Playtesting
Re: Friday Facts #142 - Playtesting
-
- Burner Inserter
- Posts: 13
- Joined: Mon Jun 06, 2016 5:14 pm
- Contact:
Re: Friday Facts #142 - Playtesting
Since a few people are arguing against, I'll add my voice to for. Extra slots should be tied to actual armour, not to research, not as an unlock. Otherwise it makes no sense. Where does this extra capacity come from? If the armour has extra capacity, not having the armour should remove it.
Personally I think the "locked inventory" system is the better solution than item-drop (just no) or armour-specific-inventory (make some extra armour and you can carry how much?). Someone mentioned that locking the inventory on armour removal is a bad solution, but never said why? Anyone want to elaborate on that?
One potential "exploit" could be that you could put armour on, load up inventory, take armour off, go somewhere and then put armour on to access that inventory. However the scope for exploitation is slim indeed. Only really exploitable if multiple people are sharing the same armour for this purpose, and even then it'd probably be easier to use cars.
Personally I think the "locked inventory" system is the better solution than item-drop (just no) or armour-specific-inventory (make some extra armour and you can carry how much?). Someone mentioned that locking the inventory on armour removal is a bad solution, but never said why? Anyone want to elaborate on that?
One potential "exploit" could be that you could put armour on, load up inventory, take armour off, go somewhere and then put armour on to access that inventory. However the scope for exploitation is slim indeed. Only really exploitable if multiple people are sharing the same armour for this purpose, and even then it'd probably be easier to use cars.
Re: Friday Facts #142 - Playtesting
Are you really arguing inventory space logic in a video game where a character can carry thousands of metal plates?? Or a whole showroom of cars in his pocket?Islacrusez wrote:Otherwise it makes no sense. Where does this extra capacity come from?
Let's just keep the realism to places where it makes sense, and have bigger inventory spaces just be unlocked by technology.
(i dont see anyone complaining about researching a bigger toolbelt either, so...)
My mod: "Auto Deploy Destroyers" (follower robots) viewtopic.php?f=97&t=24545
Re: Friday Facts #142 - Playtesting
Since its already implemented and in testing, I guess its too late for voting.Islacrusez wrote:Since a few people are arguing against, I'll add my voice to for.
I guess you simply can't take of your armor if your inventory is too full (like chests, which can't be mined if full) or that the items are stored in the armor and inaccessible until reequipped (unlikely, but possible).Islacrusez wrote:Personally I think the "locked inventory" system is the better solution than item-drop (just no) or armour-specific-inventory (make some extra armour and you can carry how much?). Someone mentioned that locking the inventory on armour removal is a bad solution, but never said why? Anyone want to elaborate on that?
Re: Friday Facts #142 - Playtesting
As long as there are arguments provided in posts, it can give dev team new ideas to test, and it can lead to changes/improvements/scraping/remaking some aspects of the game depending on test results. So this kind of feedback is useful.Sebb767 wrote:Since its already implemented and in testing, I guess its too late for voting.
-
- Burner Inserter
- Posts: 13
- Joined: Mon Jun 06, 2016 5:14 pm
- Contact:
Re: Friday Facts #142 - Playtesting
This would potentially cause problems if your armour is destroyed. What would happen then?Sebb767 wrote: I guess you simply can't take of your armor if your inventory is too full (like chests, which can't be mined if full)
-
- Fast Inserter
- Posts: 124
- Joined: Wed Mar 30, 2016 7:54 pm
- Contact:
Re: Friday Facts #142 - Playtesting
An excellent reason for ++ storage to be linked to research instead of armorIslacrusez wrote:This would potentially cause problems if your armour is destroyed. What would happen then?Sebb767 wrote: I guess you simply can't take of your armor if your inventory is too full (like chests, which can't be mined if full)
Tutorials, wild playthroughs, and more! https://www.youtube.com/@KatherineOfSky
Re: Friday Facts #142 - Playtesting
All inventory would be destroyed, just like chests now.Islacrusez wrote:This would potentially cause problems if your armour is destroyed. What would happen then?Sebb767 wrote: I guess you simply can't take of your armor if your inventory is too full (like chests, which can't be mined if full)
Ahh the good old days, when the entire contents would spill all around the chest on the ground .
My mod: "Auto Deploy Destroyers" (follower robots) viewtopic.php?f=97&t=24545
Re: Friday Facts #142 - Playtesting
Whooh!:
Was looking for this feature for a long time.
I was wondering though, if a mod does an Evolution deduction, who will this work with this feature?
To use round numbers, let's say the evolution factor is 30% = (Time 10%)(Pollution 10%)(Spawner kills 10%). IF a mod removes 6%. (exaggerated) , so the new evolution factor is 24%. What will the values then be?
Will it be 24% = (Time 8%)(Pollution 8%)(Spawner kills 8%) or 24% = (Time 10%)(Pollution 10%)(Spawner kills 10%)(Other -6%). or do you have to specify from what factor the deduction should happen?
Just wondering.
Thanks,
Code: Select all
Evolution factor 0.8702 (Time 9%)(Pollution 57%)(Spawner kills 32%)
I was wondering though, if a mod does an Evolution deduction, who will this work with this feature?
To use round numbers, let's say the evolution factor is 30% = (Time 10%)(Pollution 10%)(Spawner kills 10%). IF a mod removes 6%. (exaggerated) , so the new evolution factor is 24%. What will the values then be?
Will it be 24% = (Time 8%)(Pollution 8%)(Spawner kills 8%) or 24% = (Time 10%)(Pollution 10%)(Spawner kills 10%)(Other -6%). or do you have to specify from what factor the deduction should happen?
Just wondering.
Thanks,
Re: Friday Facts #142 - Playtesting
Percentage will always add to (almost) 100%, as those a factor contributing to current evolution factor and calculated dynamically. So at the start of the game you could see something likeTheSAguy wrote:I was wondering though, if a mod does an Evolution deduction, who will this work with this feature?
To use round numbers, let's say the evolution factor is 30% = (Time 10%)(Pollution 10%)(Spawner kills 10%). IF a mod removes 6%. (exaggerated) , so the new evolution factor is 24%. What will the values then be?
Will it be 24% = (Time 8%)(Pollution 8%)(Spawner kills 8%) or 24% = (Time 10%)(Pollution 10%)(Spawner kills 10%)(Other -6%). or do you have to specify from what factor the deduction should happen?
. I believe, that there will be required tag when manipulating evolution factor, which will determine which category it belongs.Evolution factor 0.0002 (Time 100%)
Re: Friday Facts #142 - Playtesting
So I will soon be able to check the evolution factor, improve my factory to produce less pollution, wait without attacking or burning anything, before checking the pollution factor again to see that it has decreased?
Re: Friday Facts #142 - Playtesting
Pollution factor can decrease? I thought it was monotone.alan2here wrote:So I will soon be able to check the evolution factor, improve my factory to produce less pollution, wait without attacking or burning anything, before checking the pollution factor again to see that it has decreased?
-
- Fast Inserter
- Posts: 124
- Joined: Wed Mar 30, 2016 7:54 pm
- Contact:
Re: Friday Facts #142 - Playtesting
Using less energy (Efficiency modules) and reducing polluting buildings (steam engines, boilers, etc.) will reduce your pollution cloud significantly. It takes time to be absorbed, however; the effect isn't instant.malecord wrote:Pollution factor can decrease? I thought it was monotone.alan2here wrote:So I will soon be able to check the evolution factor, improve my factory to produce less pollution, wait without attacking or burning anything, before checking the pollution factor again to see that it has decreased?
Tutorials, wild playthroughs, and more! https://www.youtube.com/@KatherineOfSky
Re: Friday Facts #142 - Playtesting
It'll be interesting to see, I think I'm quite good already but I would love to see whats going on more.
Re: Friday Facts #142 - Playtesting
Pollution itself can decrease, but it impact on evolution factor is irreversible. In fact, even single forge, completely surrounded by trees, so pollution will never escape the chunk will eventually provide enough pollution to inctease evolution factor up to 1.
- brunzenstein
- Smart Inserter
- Posts: 1117
- Joined: Tue Mar 01, 2016 2:27 pm
- Contact:
Re: Friday Facts #142 - Playtesting
Could that be a crane moving standard containers onto low level wagons?DedlySpyder wrote:Ok, I inserted a rail into the "crane" image, and it fits. So, I definitely think it is a train station.
Tin-Foil Hat Train Station
Re: Friday Facts #142 - Playtesting
Thanks for the info It's a shame that the evolution factor never normally decreases. I'd hoped improving the factories pollution output would cause them to attack less, dominating the other factors such as play time for a long time.
Re: Friday Facts #142 - Playtesting
If you limit your factory pollution, so it stops spreading, and destroy nests already influenced by pollution, then no new biters will attack (as long as you prevent base-building. I do not rememeber if non-aggravated bases send builders).
Re: Friday Facts #142 - Playtesting
There was a funny bug a while back, when evolution factor could decrease. It would go into negative numbers and crash the gamealan2here wrote:Thanks for the info It's a shame that the evolution factor never normally decreases. I'd hoped improving the factories pollution output would cause them to attack less, dominating the other factors such as play time for a long time.
Re: Friday Facts #142 - Playtesting
Speaking of faster mining of rails... Can you please do the same for walls? Since the segments are only 1x1, it takes AGES to correct a misaligned or otherwise unwanted wall until you finally get the deconstruction planner.
Also, I was thinking... the deconstruction planner itself is super cheap since it is infinitely reusable. I wonder if it might be better to have it stackable and partially use up just like the repair packs. Maybe have them capable of marking 500 objects for deconstruction before they are used up, and allow 100x planners in a stack. Or something.
Also, I was thinking... the deconstruction planner itself is super cheap since it is infinitely reusable. I wonder if it might be better to have it stackable and partially use up just like the repair packs. Maybe have them capable of marking 500 objects for deconstruction before they are used up, and allow 100x planners in a stack. Or something.