Testbench for 3/4way intersections
-
hansjoachim
- Filter Inserter
- Posts: 258
- Joined: Wed Apr 26, 2017 7:03 pm
- Contact:
Re: Testbench for 3/4way intersections
v4.1.1 LHD wouldn't run. Some missing signals, fixed.
-
hansjoachim
- Filter Inserter
- Posts: 258
- Joined: Wed Apr 26, 2017 7:03 pm
- Contact:
Re: Testbench for 3/4way intersections
v4.2 New score added to the test because of the new intersection forum. viewtopic.php?f=194&t=100614
Also added a mod that makes lamps that are off darker. Makes the display more readable.
Also added a mod that makes lamps that are off darker. Makes the display more readable.
- Attachments
-
- display.png (1.54 MiB) Viewed 7972 times
Re: Testbench for 3/4way intersections
Would you mind publishing a version that can function without creative mod substations?
-
hansjoachim
- Filter Inserter
- Posts: 258
- Joined: Wed Apr 26, 2017 7:03 pm
- Contact:
Re: Testbench for 3/4way intersections
It works without creative mod. It makes the display more cluttered with more substations. If you want to use it without creative mod, just place down some normal substations powering the display. I added the copper wiring back to the normal substations.DaveMcW wrote: Sat Nov 20, 2021 1:17 am Would you mind publishing a version that can function without creative mod substations?
Re: Testbench for 3/4way intersections
Please disable fuel alerts.
Code: Select all
/alerts disable train_out_of_fuel-
hansjoachim
- Filter Inserter
- Posts: 258
- Joined: Wed Apr 26, 2017 7:03 pm
- Contact:
Re: Testbench for 3/4way intersections
4.3.1 Feature update: Custom train sets, an optional addon for auto testing multiple times
You can set a custom train path so that it simulates your own factory better. Much easier to adjust train lengths now. You have to be in manual mode to test custom sets.
Minor fixes
- You can switch set in the middle of a manual test
- Better detection for when the intersection is cleared.
You can set a custom train path so that it simulates your own factory better. Much easier to adjust train lengths now. You have to be in manual mode to test custom sets.
Minor fixes
- You can switch set in the middle of a manual test
- Better detection for when the intersection is cleared.
Re: Testbench for 3/4way intersections
Here is the 5.1 version of the addon (2022/7/27):
Last edited by Avona on Fri Aug 05, 2022 3:45 am, edited 5 times in total.
-
hansjoachim
- Filter Inserter
- Posts: 258
- Joined: Wed Apr 26, 2017 7:03 pm
- Contact:
Re: Testbench for 3/4way intersections
4.5.2 Fixed a rounding error, where it would round down from .9 instead off up.
Now it rounds up from .5
Now it rounds up from .5
Re: Testbench for 3/4way intersections
how hard would it be to add in another 4 outputs to test 8-way intersections with this set up?
-
hansjoachim
- Filter Inserter
- Posts: 258
- Joined: Wed Apr 26, 2017 7:03 pm
- Contact:
Re: Testbench for 3/4way intersections
Depends on how well you know the testbench. It's very doable
Re: Testbench for 3/4way intersections
The issue with the current test bench is that the input/output lanes overlap:
If you move lanes and stations around, you could remove the conflicting overlaps. It's also an issue we had with LRLR style 4 lane intersections but there were also more problems. 8 ways should be easier.
If you move lanes and stations around, you could remove the conflicting overlaps. It's also an issue we had with LRLR style 4 lane intersections but there were also more problems. 8 ways should be easier.
-
hansjoachim
- Filter Inserter
- Posts: 258
- Joined: Wed Apr 26, 2017 7:03 pm
- Contact:
Re: Testbench for 3/4way intersections
New version 4.6
Adjustable input tpm, so that you can go beyond the standard 29 TPM or lower to hit the sweet spot for your intersection. Max is 33 tpm per lane.
Removed crossing between input and output. Allows intersections that uses [input output input output] for 4 lanes. Instead of the normal 4 lanes which are for RHT [output output input input].
Also cleaned up the spawning area.
Now support trains upto 40 cars.
Adjustable input tpm, so that you can go beyond the standard 29 TPM or lower to hit the sweet spot for your intersection. Max is 33 tpm per lane.
Removed crossing between input and output. Allows intersections that uses [input output input output] for 4 lanes. Instead of the normal 4 lanes which are for RHT [output output input input].
Also cleaned up the spawning area.
Now support trains upto 40 cars.
- Attachments
-
- Skjermbilde 2022-05-01 152411.png (1.67 MiB) Viewed 6944 times
Re: Testbench for 3/4way intersections
suppose i know very little about combinators. that is the last part of this game i have yet to fully comprehend.hansjoachim wrote: Sat Apr 30, 2022 8:40 pm Depends on how well you know the testbench. It's very doable
would adding in the additional stops as exact copies of the 4 originals and just connect with circuit wires to the rest work? Will i need to add in additional trains for routes? will i need to modify the combinator system much if at all?
-
hansjoachim
- Filter Inserter
- Posts: 258
- Joined: Wed Apr 26, 2017 7:03 pm
- Contact:
Re: Testbench for 3/4way intersections
That would work but it would be equivalent to just splitting up the current lanes from the stations.lstndfnd wrote: Tue May 03, 2022 10:10 pm would adding in the additional stops as exact copies of the 4 originals and just connect with circuit wires to the rest work? Will i need to add in additional trains for routes? will i need to modify the combinator system much if at all?
In 4.6 version you can just take whatever two lanes from each direction and use them as 4 new ways. It won't work as a proper 8 way, that requires new train schedules, but it will "work".
Re: Testbench for 3/4way intersections
so if i am understanding you correctly, if i were to make exact copies of the original stations, rename the new stations like NE, NW, SE, SW, and add them to the trains for routes then it would work as a proper 8 way intersection testing system. no need to change any of the combinators in the system at all.
if i am incorrect then please elaborate.
i would like to see if this is something that could be incorporated and if it would please the community, i would post the BP for all 8-way intersections i have made along with the altered testing map for you to see how much i screw it up lol.
if i am incorrect then please elaborate.
i would like to see if this is something that could be incorporated and if it would please the community, i would post the BP for all 8-way intersections i have made along with the altered testing map for you to see how much i screw it up lol.
-
hansjoachim
- Filter Inserter
- Posts: 258
- Joined: Wed Apr 26, 2017 7:03 pm
- Contact:
Re: Testbench for 3/4way intersections
That could work.lstndfnd wrote: Thu May 05, 2022 3:23 am so if i am understanding you correctly, if i were to make exact copies of the original stations, rename the new stations like NE, NW, SE, SW, and add them to the trains for routes then it would work as a proper 8 way intersection testing system. no need to change any of the combinators in the system at all.
if i am incorrect then please elaborate.
i would like to see if this is something that could be incorporated and if it would please the community, i would post the BP for all 8-way intersections i have made along with the altered testing map for you to see how much i screw it up lol.
I'd recommend making custom train schedules on the brick area and using manual to test 8 way intersections. Use the newest version 4.6 because ite easier to move/copy than earlier versions.
Remember to set the train in the far back to automatic.
-
hansjoachim
- Filter Inserter
- Posts: 258
- Joined: Wed Apr 26, 2017 7:03 pm
- Contact:
Re: Testbench for 3/4way intersections
v4.6.1 New RHT and LHT Detector.
Together with 4.6 this now makes all kinds of combinations possible to test without errors. You can also now connect to whatever rail you want. No need to use the inner lanes. This makes it easier to adapt to different rail spacings as you don't have to do all the curves for 2/4 rail spacings.
Together with 4.6 this now makes all kinds of combinations possible to test without errors. You can also now connect to whatever rail you want. No need to use the inner lanes. This makes it easier to adapt to different rail spacings as you don't have to do all the curves for 2/4 rail spacings.
-
hansjoachim
- Filter Inserter
- Posts: 258
- Joined: Wed Apr 26, 2017 7:03 pm
- Contact:
Re: Testbench for 3/4way intersections
v5 Major update
Now it's an intersection tester for any intersections! if you are missing some connections, trains will use whatever lanes are available. The update from Kano to the spawning mod makes that possible.
Support for up to 16 ways or any combination of planned intersections. There is no need for lane changers if all lanes can't go in every direction.
Recommended set 4, in manual mode, for testing planned intersections, as in not 3/4/8 way intersections.
New 3/4 way detector.
Fixed two significant bugs as well.
Now it's an intersection tester for any intersections! if you are missing some connections, trains will use whatever lanes are available. The update from Kano to the spawning mod makes that possible.
Support for up to 16 ways or any combination of planned intersections. There is no need for lane changers if all lanes can't go in every direction.
Recommended set 4, in manual mode, for testing planned intersections, as in not 3/4/8 way intersections.
New 3/4 way detector.
Fixed two significant bugs as well.
-
hansjoachim
- Filter Inserter
- Posts: 258
- Joined: Wed Apr 26, 2017 7:03 pm
- Contact:
Re: Testbench for 3/4way intersections
v5.0.6
With version 5.0.4 multiple issues were fixed regarding the 3/4way detector. Also added lights to easier see which trains are being spawned and named all stations so that you can see which trains are being spawned. Makes it easier to change things and to understand the bench.
5.0.5 introduced some error to the train schedules, mainly because I copied from on area to another, so I had to redo the schedules
With version 5.0.4 multiple issues were fixed regarding the 3/4way detector. Also added lights to easier see which trains are being spawned and named all stations so that you can see which trains are being spawned. Makes it easier to change things and to understand the bench.
5.0.5 introduced some error to the train schedules, mainly because I copied from on area to another, so I had to redo the schedules
Re: Testbench for 3/4way intersections
In v5.0.6
Set 2 RHT 3-way is different from set 2 LHT 3-way. East coming trains prefer to go west for RHT instead of south.
Set 2 RHT 3-way is different from set 2 LHT 3-way. East coming trains prefer to go west for RHT instead of south.
Efficient inefficient design.