[MOD 0.12.x] Autofill

[Ratzap]

Autofill is giving me an error with 12.5. Presumably if everyone else is having similar trouble we'll get a fix soon?

What does the error message say?

I haven't played since, I just updated to 12.6 and tried again - my save loads, I put down a burner inserter and this pops up

[P1h3r1e3d13]

Autofill is giving me an error with 12.5. Presumably if everyone else is having similar trouble we'll get a fix soon?

What does the error message say?

I haven't played since, I just updated to 12.6 and tried again - my save loads, I put down a burner inserter and this pops up

...

I'm on 1.6 and AutoFill 1.3.4 and no such error.

It is refusing to fill furnaces, though, when I have coal in inventory. I'm new to this mod, so I don't know whether that's a new bug.

[rk84]

Autofill is giving me an error with 12.5. Presumably if everyone else is having similar trouble we'll get a fix soon?

What does the error message say?

I haven't played since, I just updated to 12.6 and tried again - my save loads, I put down a burner inserter and this pops up
...

its possibly compatibility issue between autofill versions. Sorry.
This might help

Code: Select all

/c remote.call("af", "default")

or you could try load&save your game without autofill and then load the game with autofill active again.

[Ratzap]

or you could try load&save your game without autofill and then load the game with autofill active again.

That worked thanks. I disabled autofill, loaded the save, saved it to a fresh file, quit game, restart, enable autofill and on loading the new files it's working.

[StoneLegion]

Fresh time install. When I'm inside a tank and place a turret down I get the following error:

[Tritano]

Doing a quick grep in the lua code of factorio says that there is no function getlocalisedentityname but one that is named get_localised_entity_name. It's probably a leftover code part from factorio 0.11

How to fix

Open the zip of autofill, edit control.lua, change the word getlocalisedentityname in line 173 to getlocalised_entity_name

[rk84]

Sorry for wait the "getlocalised_entity_name" is fixed and new release is in first post.
I also changed code and interface a bit. There is now one table holding settings, but players can still have personal settings in separated table.

[StoneLegion]

Thanks mate.

[khozmo]

I am having no luck getting autofill to fill bobs turrets and gun turrets.

This is the command I have seen on a couple other posts. I press ~ (tilde) and paste the command below and it does not seem to do anything. I know I am missing something (probably very simple). I have also tried the command below and put in gun-turret to modify the existing limit on gun turrets but alas nothing.

/c remote.call("af","insertset","","bob-gun-turret-2",{priority=1,group="turrets",limits={20},"ammo-bullets"})

Any help would be greatly appreciated.

[irbork]

I am having no luck getting autofill to fill bobs turrets and gun turrets.

This is the command I have seen on a couple other posts. I press ~ (tilde) and paste the command below and it does not seem to do anything. I know I am missing something (probably very simple). I have also tried the command below and put in gun-turret to modify the existing limit on gun turrets but alas nothing.

/c remote.call("af","insertset","","bob-gun-turret-2",{priority=1,group="turrets",limits={20},"ammo-bullets"})

Any help would be greatly appreciated.

You should try to put your user name from settings in the "". And if it won't help run reset af command and then try to run custom insert commands.

[MalwareByDesign]

I am having no luck getting autofill to fill bobs turrets and gun turrets.

This is the command I have seen on a couple other posts. I press ~ (tilde) and paste the command below and it does not seem to do anything. I know I am missing something (probably very simple). I have also tried the command below and put in gun-turret to modify the existing limit on gun turrets but alas nothing.

/c remote.call("af","insertset","","bob-gun-turret-2",{priority=1,group="turrets",limits={20},"ammo-bullets"})

Any help would be greatly appreciated.

It's a bug in 1.3.5.
Replace the isValidSet function in control.lua with this one:

Code: Select all

function isValidSet(set)
	if (set == nil) or (set == 0) then
		globalPrint("autofill.isValidSet: set is nil or 0 (success)")
		return true -- supported for clearing sets
	elseif type(set) == "table" then
		globalPrint("autofill.isValidSet: set is a table")
		for i = 1, #set do
			if set[i] == "fuels-all" then
				set[i] = global.fuels.all
				globalPrint("autofill.isValidSet: accepted preset: fuels-all")
			elseif set[i] == "fuels-high" then
				set[i] = global.fuels.high
				globalPrint("autofill.isValidSet: accepted preset: fuels-high")
			elseif set[i] == "ammo-bullets" then
				set[i] = global.ammo.bullets
				globalPrint("autofill.isValidSet: accepted preset: ammo-bullets")
			elseif set[i] == "ammo-shells" then
				set[i] = global.ammo.shells
				globalPrint("autofill.isValidSet: accepted preset: ammo-shells")
			elseif type(set[i]) == "table" then
				globalPrint("autofill.isValidSet: no preset used, checking item prototypes (might still cause errors)")
				for j = 1, #set[i] do
					if game.item_prototypes[set[i][j]] == nil then
						globalPrint( {"autofill.isValidSet: invalid item: ", tostring(set[i][j])} )
						return false
					end
				end
			end
		end
		return true -- table handled
	end
	globalPrint("autofill.isValidSet: unknown set format")
	return false
end

[rk84]

Thanks for report. Sorry for typo.

/c remote.call("af","insertset","","bob-gun-turret-2",{priority=1,group="turrets",limits={20},"ammo-bullets"})

Seems its missing item array, but I will make it handel single items in next release.

Edit:sorry I missread that command.

[khozmo]

I am having no luck getting autofill to fill bobs turrets and gun turrets.

This is the command I have seen on a couple other posts. I press ~ (tilde) and paste the command below and it does not seem to do anything. I know I am missing something (probably very simple). I have also tried the command below and put in gun-turret to modify the existing limit on gun turrets but alas nothing.

/c remote.call("af","insertset","","bob-gun-turret-2",{priority=1,group="turrets",limits={20},"ammo-bullets"})

Any help would be greatly appreciated.

It's a bug in 1.3.5.
Replace the isValidSet function in control.lua with this one:

Code: Select all

function isValidSet(set)
	if (set == nil) or (set == 0) then
		globalPrint("autofill.isValidSet: set is nil or 0 (success)")
		return true -- supported for clearing sets
	elseif type(set) == "table" then
		globalPrint("autofill.isValidSet: set is a table")
		for i = 1, #set do
			if set[i] == "fuels-all" then
				set[i] = global.fuels.all
				globalPrint("autofill.isValidSet: accepted preset: fuels-all")
			elseif set[i] == "fuels-high" then
				set[i] = global.fuels.high
				globalPrint("autofill.isValidSet: accepted preset: fuels-high")
			elseif set[i] == "ammo-bullets" then
				set[i] = global.ammo.bullets
				globalPrint("autofill.isValidSet: accepted preset: ammo-bullets")
			elseif set[i] == "ammo-shells" then
				set[i] = global.ammo.shells
				globalPrint("autofill.isValidSet: accepted preset: ammo-shells")
			elseif type(set[i]) == "table" then
				globalPrint("autofill.isValidSet: no preset used, checking item prototypes (might still cause errors)")
				for j = 1, #set[i] do
					if game.item_prototypes[set[i][j]] == nil then
						globalPrint( {"autofill.isValidSet: invalid item: ", tostring(set[i][j])} )
						return false
					end
				end
			end
		end
		return true -- table handled
	end
	globalPrint("autofill.isValidSet: unknown set format")
	return false
end

I can finally stop sitting in the corner rocking back and forth muttering! Thanks for this fix. I see that RK has already posted as well!

[The Lone Wolfling]

Useful mod. Does anyone have a complete config set for Bob's mods, by any chance?

(Also: I would appreciate it if autofill read from a config file for default settings when starting a new world. As-is, you have to add per-world or edit the source, which gets old quickly.)

Also, personally, the default limit of 10 for gun turrets is too low.

[rk84]

Useful mod. Does anyone have a complete config set for Bob's mods, by any chance?

Thanks. I'm hoping to improve the interface for modders, so they can edit the default settings. Current version has get&set -method for the table at least.

(Also: I would appreciate it if autofill read from a config file for default settings when starting a new world. As-is, you have to add per-world or edit the source, which gets old quickly.)

Seems like good idea. I have to think if there is any desync pitfalls. Another way could be custom scenarior script that edits settings on init.

[HeilTec]

Useful mod. Does anyone have a complete config set for Bob's mods, by any chance?(...)

I have played a bit with bobs and autofill.
I am unsure where the glue between the mods should be placed.

As an intermediate solution I placed a config.lua in the bobswarfare mod for the autofill of turrets.

control.lua

Code: Select all

-- control.lua for Bob's Warfare to enable Autofill for bullet turrets
require "defines"

game.on_init(function()
    for index,player in ipairs(game.players) do
      initAutofill(player.name)
  end
end
)

game.on_event(defines.events.on_player_created, function(event)
  local player = game.get_player(event.player_index)
  initAutofill(player.name)
end)

function initAutofill(username) 
  if remote.interfaces.af then
      local turretFillset = {priority=1, group="turrets", limits= {10}, "ammo-bullets"}
      remote.call("af","insertset",username,"bob-gun-turret-2",turretFillset)
      remote.call("af","insertset",username,"bob-gun-turret-3",turretFillset)
      remote.call("af","insertset",username,"bob-gun-turret-4",turretFillset)
      remote.call("af","insertset",username,"bob-gun-turret-5",turretFillset)
      remote.call("af","insertset",username,"bob-sniper-turret-1",turretFillset)
      remote.call("af","insertset",username,"bob-sniper-turret-2",turretFillset)
      remote.call("af","insertset",username,"bob-sniper-turret-3",turretFillset)
  end
end

Like looking code is needed for every other mod that introduced any entity to be filled.

[HeilTec]

boblogistics

Code: Select all

-- control.lua for Bob's Logistics to enable Autofill for locomotives
require "defines"

game.on_init(function()
    for index,player in ipairs(game.players) do
      initAutofill(player.name)
  end
end
)

game.on_event(defines.events.on_player_created, function(event)
  local player = game.get_player(event.player_index)
  initAutofill(player.name)
end)

function initAutofill(username) 
  if remote.interfaces.af then
      local locomotiveFillset = {priority=1, group="locomotives", slots={1}, {"solid-fuel", "coal", "raw-wood"}}
      remote.call("af","insertset",username,"diesel-locomotive",locomotiveFillset)
      remote.call("af","insertset",username,"diesel-locomotive-2",locomotiveFillset)
      remote.call("af","insertset",username,"diesel-locomotive-3",locomotiveFillset)
      remote.call("af","insertset",username,"armoured-diesel-locomotive",locomotiveFillset)
  end
end

[HeilTec]

This mod has already been a great feature.
I would like to contribute.
Is this on github?

Looking at the new code I now think the "glue" belongs inside the autofill mod.

[HeilTec]

Autofill for boblogistics, bobpower and bobwarfare.

Here is how I envision the glue placed in autofill control.lua

autofill_1.3.6.zip

patched for bob

(44.14 KiB) Downloaded 367 times

Partially tested - no gamebreaker.

[rk84]

This mod has already been a great feature.
I would like to contribute.
Is this on github?

Actually yes... oh I havent updated it for 2 years

Looking at the new code I now think the "glue" belongs inside the autofill mod.

In some degree I feel it should be outside, but I'm open for both.