If you're referring to the imgur gallery, you should be able to just click on an image to get a larger version of it or right-click and open in new tab/window for the full-size version.
pY Raw Ores Discussion
Moderator: pyanodon
- otakushowboat
- Inserter
- Posts: 45
- Joined: Mon Mar 25, 2019 10:33 pm
- Contact:
Re: pY Raw Ores Discussion
Re: pY Raw Ores Discussion
Smelting through "Reduced Nexelit" is pointless,
much more profitable and easier to melt through "High grade Nexelit"
much more profitable and easier to melt through "High grade Nexelit"
Re: pY Raw Ores Discussion
There are several places where the only reason to make "Reduced X" is to pass it through the next step which makes "Sintered X". This is the case for nexelit, 4.45 high grade passed up to sintering makes 100 molten, while 5.89 high grade melted as is makes 100 molten. (Whether you want to spend the extra side inputs for this is debatable.)
Not saying this is good design (personally I'd say the recipe should either be better than its predecessor on a per-ore basis or just not exist), but that's how it is in a lot of places in RO.
Re: pY Raw Ores Discussion
To destroy excess items you have a burner.Blokus wrote: ↑Fri Aug 16, 2019 8:48 pm There are several places where the only reason to make "Reduced X" is to pass it through the next step which makes "Sintered X". This is the case for nexelit, 4.45 high grade passed up to sintering makes 100 molten, while 5.89 high grade melted as is makes 100 molten. (Whether you want to spend the extra side inputs for this is debatable.)
Not saying this is good design (personally I'd say the recipe should either be better than its predecessor on a per-ore basis or just not exist), but that's how it is in a lot of places in RO.
And from recipes of a higher level, I expect appropriate effectiveness.
Re: pY Raw Ores Discussion
Not sure what destroying excess has to do with what I said. Maybe you thought I said side outputs, not side inputs.Anon2k wrote: ↑Fri Aug 16, 2019 9:53 pmTo destroy excess items you have a burner.Blokus wrote: ↑Fri Aug 16, 2019 8:48 pm There are several places where the only reason to make "Reduced X" is to pass it through the next step which makes "Sintered X". This is the case for nexelit, 4.45 high grade passed up to sintering makes 100 molten, while 5.89 high grade melted as is makes 100 molten. (Whether you want to spend the extra side inputs for this is debatable.)
Not saying this is good design (personally I'd say the recipe should either be better than its predecessor on a per-ore basis or just not exist), but that's how it is in a lot of places in RO.
And from recipes of a higher level, I expect appropriate effectiveness.
And yeah, I get what you mean about higher level recipes. Just saying that this is commonplace in RO so I'm sure Py is already aware of it.
Re: pY Raw Ores Discussion
That's what I did. It just loads the same image (640 wide) and none of the text is readable.otakushowboat wrote: ↑Thu Aug 15, 2019 1:51 pm If you're referring to the imgur gallery, you should be able to just click on an image to get a larger version of it or right-click and open in new tab/window for the full-size version.
Re: pY Raw Ores Discussion
Bug in recipe for Niobium Titanium alloy from molten tian + niobium complex
100 molten titanium + 40 niobium complex = 15 Niobium Titanium alloy
May be must be 100 molten titanium + 50 niobium complex? bcuz initial recipe requires 10 titanium plates + 5 niobium plates = 2 Niobium titanium alloy
Fix pls
100 molten titanium + 40 niobium complex = 15 Niobium Titanium alloy
May be must be 100 molten titanium + 50 niobium complex? bcuz initial recipe requires 10 titanium plates + 5 niobium plates = 2 Niobium titanium alloy
Fix pls
Nickname on ModPortal - Naron79
Re: pY Raw Ores Discussion
no... not a bug.aklesey1 wrote: ↑Wed Sep 11, 2019 9:34 pm Bug in recipe for Niobium Titanium alloy from molten tian + niobium complex
100 molten titanium + 40 niobium complex = 15 Niobium Titanium alloy
May be must be 100 molten titanium + 50 niobium complex? bcuz initial recipe requires 10 titanium plates + 5 niobium plates = 2 Niobium titanium alloy
Fix pls
pY Coal processing mod
Discord: Pyanodon #5791
Discord: Pyanodon #5791
Re: pY Raw Ores Discussion
Strange decision about recipe with molten versions of titanium and niobium but okey
Recipe for nihrome from molten versions of nickel and chrome looks correct, and here its different
Same with NbFe alloy its looks correct too
Recipe for nihrome from molten versions of nickel and chrome looks correct, and here its different
Same with NbFe alloy its looks correct too
Nickname on ModPortal - Naron79
Re: pY Raw Ores Discussion
The split of the silver-lead concentrate > high grade lead/silver recipe into two new ones had some issues, including a crash-on-load bug. Two commits with fixes are here: https://github.com/pyanodon/pyrawores/pull/12
-
- Burner Inserter
- Posts: 7
- Joined: Thu Nov 29, 2018 4:26 pm
- Contact:
Re: pY Raw Ores Discussion
In the initial game, you can't get nickel for t2 science. It is needed for the production of rubber, but it cannot be obtained. In the initial zone, he is not and there is no car or train to effectively look for him
Re: pY Raw Ores Discussion
I think you mean chromium, assuming you have PH. And yeah this is annoying but it doesn't make it impossible to progress. If you don't have any railworld type settings then chromium is likely to be close by anyway.
-
- Burner Inserter
- Posts: 7
- Joined: Thu Nov 29, 2018 4:26 pm
- Contact:
Re: pY Raw Ores Discussion
Yes chromium. I'm playing with RSO and the nearest field is very far. Will this recipe ever change? Because it's stupid
Re: pY Raw Ores Discussion
I do think that reaction is a bit much. In vanilla the things excluded from the starting area are crude oil and uranium. You do need oil for blue science, but by that time you can make a car and trains. So you can use a car to scout for oil, and then use a train to ship it back to your base. This means that railworld type settings pretty much just mean that you need to build more trains at a time when you actually can do that. With chromium you don't have this luxury. So instead of just doing better, more likely you're going to just give up or use cheats (like a movespeed multiplier) to help you find it. And if you have aliens around then this moment is particularly problematic.
In any case this is really a PH issue, as in the most likely way to set up a fix for this would be to change the mapgen to put chromium in the start area if PH is enabled. It doesn't particularly need to be there otherwise.
Also, I think one thing that also gets annoying to players with this issue is that it's not that you even need to set up a steady stream of chromium at this stage. You just have to make a handful of bars and then return to what you were doing back at base. So it just feels like this interruption that didn't really need to be there. Somewhat similar annoyances have happened elsewhere: for example you used to just need to make a handful of stainless steel to make gas processing units to set up blue science. But now blue science directly consumes stainless steel, so it feels more like an important item rather than a minor obstacle that you're going to tackle and then forget about for hours.
Anyway, for the meantime my general advice is to just not run railworld type settings. You're gonna want trains anyway, so they're not really doing you any favors.
In any case this is really a PH issue, as in the most likely way to set up a fix for this would be to change the mapgen to put chromium in the start area if PH is enabled. It doesn't particularly need to be there otherwise.
Also, I think one thing that also gets annoying to players with this issue is that it's not that you even need to set up a steady stream of chromium at this stage. You just have to make a handful of bars and then return to what you were doing back at base. So it just feels like this interruption that didn't really need to be there. Somewhat similar annoyances have happened elsewhere: for example you used to just need to make a handful of stainless steel to make gas processing units to set up blue science. But now blue science directly consumes stainless steel, so it feels more like an important item rather than a minor obstacle that you're going to tackle and then forget about for hours.
Anyway, for the meantime my general advice is to just not run railworld type settings. You're gonna want trains anyway, so they're not really doing you any favors.
Re: pY Raw Ores Discussion
we dont have urarium on start area. Generate a map with chromium nearby.
theres a limit if start resources, if you know how to force that limit, im open to it. But if you wanna just endose the "this is stupid" rant, i will keep my decision.
theres a limit if start resources, if you know how to force that limit, im open to it. But if you wanna just endose the "this is stupid" rant, i will keep my decision.
pY Coal processing mod
Discord: Pyanodon #5791
Discord: Pyanodon #5791
-
- Filter Inserter
- Posts: 771
- Joined: Sun Jun 03, 2018 8:54 am
- Contact:
Re: pY Raw Ores Discussion
why not add a car and a few repair kits as start items? that would fix the problem for there types of situations.
Re: pY Raw Ores Discussion
I said uranium was excluded from the start area in vanilla. That and oil are the things that are excluded, and that's OK because you don't need them until after you can already build cars and trains.
Anyway, are you at that cap already? If so, can you post the list of things that are currently in that table? I'm having some trouble figuring out what it is experimentally. But my general impression has been that there are some things that are in the starting area like small oil patches that are less important than chromium (if PH is installed of course).
An alternative is to be more generous with starting items as immortal_sniper suggested above me. Although this isn't a perfect fix in the case of chromium because of the need for syngas and electricity to mine it. This idea could also be used to smooth out the first hour of the game by giving you some miners, furnaces, and maybe some wood. (Chopping hundreds of units of wood by hand before you can build a botanical nursery+wood processing unit is one of the biggest complaints about PyCP.)
And finally the main alternative is to just generate maps using the vanilla generator with normal frequency. When you do that, chromium tends to be close by, in fact it's often within the visible area.
- BlueTemplar
- Smart Inserter
- Posts: 3133
- Joined: Fri Jun 08, 2018 2:16 pm
- Contact:
Re: pY Raw Ores Discussion
While it's just a workaround, I suggest using AAI Hauler :
it's a cheap Science 1 vehicle without weapons :
https://mods.factorio.com/mod/aai-vehicles-hauler
it's a cheap Science 1 vehicle without weapons :
https://mods.factorio.com/mod/aai-vehicles-hauler
BobDiggity (mod-scenario-pack)
-
- Filter Inserter
- Posts: 771
- Joined: Sun Jun 03, 2018 8:54 am
- Contact:
Re: pY Raw Ores Discussion
some solar too in thereBlokus wrote: ↑Mon Sep 30, 2019 4:17 pmI said uranium was excluded from the start area in vanilla. That and oil are the things that are excluded, and that's OK because you don't need them until after you can already build cars and trains.
Anyway, are you at that cap already? If so, can you post the list of things that are currently in that table? I'm having some trouble figuring out what it is experimentally. But my general impression has been that there are some things that are in the starting area like small oil patches that are less important than chromium (if PH is installed of course).
An alternative is to be more generous with starting items as immortal_sniper suggested above me. Although this isn't a perfect fix in the case of chromium because of the need for syngas and electricity to mine it. This idea could also be used to smooth out the first hour of the game by giving you some miners, furnaces, and maybe some wood. (Chopping hundreds of units of wood by hand before you can build a botanical nursery+wood processing unit is one of the biggest complaints about PyCP.)
And finally the main alternative is to just generate maps using the vanilla generator with normal frequency. When you do that, chromium tends to be close by, in fact it's often within the visible area.
tar>coalgas>singas can be made on spot
maybe like 50 barrels at the start
may some bots for fee at start would be also nice and a basic roboport
look up tiny start