[0.18.10] Game accepts items that don't conform to the prototype definition

[DRY411S]

At https://wiki.factorio.com/Types/IconSpecification there are 2 options.


There is at least one mod out there that implements something like this:

Code: Select all

icon = "__base__/graphics/icons/foo.png",
icons = {
  {
    icon = "__base__/graphics/icons/foo2.png",
    icon_size = 32
  },
  {
    icon = "__base__/graphics/icons/foo3.png",
    icon_size = 32
    tint = { a = 0.75,  b = 0, g = 0, r = 0 }
  },
  {
    icon = "__base__/graphics/icons/foo4.png",
    icon_size = 32
    tint = { a = 0.75, b = 0.5, g = 0.5, r = 0.5 }
  }
}

The specification mandates that if icon is specified, then icon_size is mandatory and must also be present. It is however possible to implement the above where the specification has not been followed, and icon_size is missing when icon is present.

Mods should use 1 IconSpecification option or another, not all of one and part of another. It appears that the game base code recognises the IconSpecification Option 1, and 'forgives' the bad implementation of Option 2.

I would like the base game to reject mod code like the above that does not conform to specification

[EDIT]. Sorry my example code is wrong. It was missing the icon_size completely!

[Optera]

Correct me if I misread your post.
You defined prototype.icon and prototype.icons, but not prototype.icon_size

With icons set, icon and icon_size are ignored entirely.

[DRY411S]

Correct me if I misread your post.
You defined prototype.icon and prototype.icons, but not prototype.icon_size

It wasn't me, it was somebody else.

With icons set, icon and icon_size are ignored entirely.

That isn't what the specification says. It says there are 2 options. It doesn't say that if Option 1 is used then an incorrect implementation of Option 2 is ignored.

My issue with this is that I have to put code in my mod that identifies when other mods have incorrectly implemented off specification. I would rather the base game code errored on the off-specification mods instead of mine crashing.

[Edit] I've also contacted mod authors and asked them to use the correct specification. If they have stuff in their mods that the game is ignoroing, they should remove it.

[Optera]

I too have mods that have to handle this weirdness, but haven't had any problems with ignoring icon in presence of icons

Code: Select all

if icons then
--use icons
elseif icon and icon_size
-- use icon and icon_size
else 
-- error
end

The specification could be clearer, but I'm fairly certain that's how the base works too.

[posila]

Can't reproduce.

icon_size_missing.png (8.62 KiB) Viewed 2310 times

Code: Select all

  {
    type = "item",
    name = "fast-transport-belt",
    --icon_size = 64, icon_mipmaps = 4,
    icon = "__base__/graphics/icons/foo.png",
    icons = {
      {
        icon = "__base__/graphics/icons/foo2.png"
      },
      {
        icon = "__base__/graphics/icons/foo3.png",
        tint = { a = 0.75,  b = 0, g = 0, r = 0 }
      },
      {
        icon = "__base__/graphics/icons/foo4.png",
        tint = { a = 0.75, b = 0.5, g = 0.5, r = 0.5 }
      }
    },
    subgroup = "belt",
    order = "a[transport-belt]-b[fast-transport-belt]",
    place_result = "fast-transport-belt",
    stack_size = 100
  },

[DRY411S]

Can't reproduce.

icon_size_missing.png

Code: Select all

  {
    type = "item",
    name = "fast-transport-belt",
    --icon_size = 64, icon_mipmaps = 4,
    icon = "__base__/graphics/icons/foo.png",
    icons = {
      {
        icon = "__base__/graphics/icons/foo2.png"
      },
      {
        icon = "__base__/graphics/icons/foo3.png",
        tint = { a = 0.75,  b = 0, g = 0, r = 0 }
      },
      {
        icon = "__base__/graphics/icons/foo4.png",
        tint = { a = 0.75, b = 0.5, g = 0.5, r = 0.5 }
      }
    },
    subgroup = "belt",
    order = "a[transport-belt]-b[fast-transport-belt]",
    place_result = "fast-transport-belt",
    stack_size = 100
  },

Put icon_size in the icons { } table

[posila]

Code: Select all

  {
    type = "item",
    name = "fast-transport-belt",
    --icon_size = 64, icon_mipmaps = 4,
    icon = "__base__/graphics/icons/foo.png",
    icons = {
      icon_size = 64,
      {
        icon = "__base__/graphics/icons/foo2.png"
      },
      {
        icon = "__base__/graphics/icons/foo3.png",
        tint = { a = 0.75,  b = 0, g = 0, r = 0 }
      },
      {
        icon = "__base__/graphics/icons/foo4.png",
        tint = { a = 0.75, b = 0.5, g = 0.5, r = 0.5 }
      }
    },
    subgroup = "belt",
    order = "a[transport-belt]-b[fast-transport-belt]",
    place_result = "fast-transport-belt",
    stack_size = 100
  },

Same error

[DRY411S]

Code: Select all

  {
    type = "item",
    name = "fast-transport-belt",
    --icon_size = 64, icon_mipmaps = 4,
    icon = "__base__/graphics/icons/foo.png",
    icons = {
      icon_size = 64,
      {
        icon = "__base__/graphics/icons/foo2.png"
      },
      {
        icon = "__base__/graphics/icons/foo3.png",
        tint = { a = 0.75,  b = 0, g = 0, r = 0 }
      },
      {
        icon = "__base__/graphics/icons/foo4.png",
        tint = { a = 0.75, b = 0.5, g = 0.5, r = 0.5 }
      }
    },
    subgroup = "belt",
    order = "a[transport-belt]-b[fast-transport-belt]",
    place_result = "fast-transport-belt",
    stack_size = 100
  },

Same error

I'm really sorry, I pasted the wrong sample code at the start of the topic. I have corrected it. The code should have included icon_size entries for every icon in the icons table.

OK. Please place the icon_size inside every icon entry in the icons table, so:

Code: Select all

  {
    type = "item",
    name = "fast-transport-belt",
    --icon_size = 64, icon_mipmaps = 4,
    icon = "__base__/graphics/icons/foo.png",
    icons = {
      {
        icon = "__base__/graphics/icons/foo2.png",
      icon_size = 64
      },
      {
        icon = "__base__/graphics/icons/foo3.png",
      icon_size = 64,
        tint = { a = 0.75,  b = 0, g = 0, r = 0 }
      },
      {
        icon = "__base__/graphics/icons/foo4.png",
      icon_size = 64,
        tint = { a = 0.75, b = 0.5, g = 0.5, r = 0.5 }
      }
    },
    subgroup = "belt",
    order = "a[transport-belt]-b[fast-transport-belt]",
    place_result = "fast-transport-belt",
    stack_size = 100
  },

That is the construct I am seeing that is not throwing an error. It appears in this mod >>> https://mods.factorio.com/mod/team_competition

[posila]

I see. That's a valid definition. I have added information about icons taking priority over icon into the wiki page.

[DRY411S]

I see. That's a valid definition. I have added information about icons taking priority over icon into the wiki page.

Ok thanks. I can amend my mod with confidence now.

[DRY411S]

I too have mods that have to handle this weirdness, but haven't had any problems with ignoring icon in presence of icons

Code: Select all

if icons then
--use icons
elseif icon and icon_size
-- use icon and icon_size
else 
-- error
end

The specification could be clearer, but I'm fairly certain that's how the base works too.

You still need to use icon_size though if it is present, since it does not have to be contained in icons