Heh, I was wondering how long it would take for the direct miner insertion to pop up !
BTW, UPS-wise, are you sure that you want to use prod modules rather than speed modules in those furnaces ?
UPS optimized Steel smelting to 1 blue belt
-
BlueTemplar
- Smart Inserter
- Posts: 2869
- Joined: Fri Jun 08, 2018 2:16 pm
- Contact:
Re: UPS optimized Steel smelting to 1 blue belt
BobDiggity (mod-scenario-pack)
Re: UPS optimized Steel smelting to 1 blue belt
here is the test with all three.
- 25000 ticks
- 10 runs
(dave's save had one weird much higher result, no clue how that happened. I did not do anything on the test computer while running the test)
testfiles attached.
- 25000 ticks
- 10 runs
(dave's save had one weird much higher result, no clue how that happened. I did not do anything on the test computer while running the test)
- 2022-01-15 20_17_39-bm_ results.csv - LibreOffice Calc.png (118.09 KiB) Viewed 5401 times
- Attachments
-
- bm_belter-steel V4.zip
- (1.08 MiB) Downloaded 105 times
-
- empty.zip
- (653.19 KiB) Downloaded 100 times
-
- bm_davemcw-steel V5.zip
- (1.57 MiB) Downloaded 113 times
-
- bm_dis-steel V3.zip
- (1.15 MiB) Downloaded 123 times
-
- bm_ results.csv
- (3.71 KiB) Downloaded 108 times
Re: UPS optimized Steel smelting to 1 blue belt
@BlueTemplar:
yes. these are for real world late game use. also, I believe using only speed will not be as fast due to the increased use of iron, leading to more swings and more active % per steel bar.
But if you have a design, I'll be happy to test it.
yes. these are for real world late game use. also, I believe using only speed will not be as fast due to the increased use of iron, leading to more swings and more active % per steel bar.
But if you have a design, I'll be happy to test it.
Re: UPS optimized Steel smelting to 1 blue belt
Agree, I would expect prod modules in the furnaces to perform better than speed. But I would love to be proven wrong about this.
Re: UPS optimized Steel smelting to 1 blue belt
I've optmized further the di layout: timed the steel (848) and iron (206) inserters, removed a row of electric poles and cleaned up the output belt.
Next step is to measure the different versions above, and play a bit more... hope I can do that the next weekend! I'd like to understand the impact of:
- separate/merged circuits (guess: small or none)
- if timing perfeclty (no slipping items on the belts) gives any UPS (guess: nope)
Next step is to measure the different versions above, and play a bit more... hope I can do that the next weekend! I'd like to understand the impact of:
- separate/merged circuits (guess: small or none)
- if timing perfeclty (no slipping items on the belts) gives any UPS (guess: nope)
- Attachments
-
- Steel DI v4.12.png (1.67 MiB) Viewed 5286 times
Re: UPS optimized Steel smelting to 1 blue belt
Edit: I just calculated the effect of the modules, did not do any benchmarks
Actually, in high beacon setups 1-1 is the best, but the difference is really small. And the fact that the input resource need is smaller makes Prod modules usage an easy decision for me UPS wise... producing 20% less iron plate should be an easy win.
See my table below, hope numbers are correct.
I did such calcs for assembler machines a while ago, that was a bit more surprising, see Speed vs Productivity modules: The 12 bacon suprise
- Attachments
-
- SmeltingSpeedCalc.png (25.82 KiB) Viewed 5275 times
Re: UPS optimized Steel smelting to 1 blue belt
This one is slower than your previous one.
- 2022-01-24 16_18_19-Window.png (46.59 KiB) Viewed 5235 times
-
BlueTemplar
- Smart Inserter
- Posts: 2869
- Joined: Fri Jun 08, 2018 2:16 pm
- Contact:
Re: UPS optimized Steel smelting to 1 blue belt
Well, with direct insertion swings aren't an issue, and since this is about megabases, ore shortage shouldn't be one either ?
BobDiggity (mod-scenario-pack)
Re: UPS optimized Steel smelting to 1 blue belt
Just did a calculator check, you need 7 more furnaces per blue belt....
no go.
12 beacons speed only:
https://factoriolab.github.io/list?z=eJ ... MGAIwtCDs_
12 beacons prod in furnaces:
https://factoriolab.github.io/list?z=eJ ... MGAIv6CDg_
no go.12 beacons speed only:
https://factoriolab.github.io/list?z=eJ ... MGAIwtCDs_
12 beacons prod in furnaces:
https://factoriolab.github.io/list?z=eJ ... MGAIv6CDg_
Re: UPS optimized Steel smelting to 1 blue belt
Speed in the steel furnaces is clearly bad.
Speed in the iron furnaces might make sense. Especially if you are direct inserting from mining drills.
Speed in the iron furnaces might make sense. Especially if you are direct inserting from mining drills.
-
fallenghostplayer
- Manual Inserter
- Posts: 4
- Joined: Wed Mar 16, 2022 11:47 pm
- Contact:
Re: UPS optimized Steel smelting to 1 blue belt
I am glad I found this thread before adding a 12 beacon steel build to my factory! I don't know if this is still a thread in progress, but if that is ok, I hope to add a bit to it.
Based on the concepts elaborated in the links below, I have come to changes in design:
-Mechanics of Transport lines by Smurphy1 (https://www.reddit.com/r/technicalfacto ... ne_splits/)
-UPS efficient double sided belts by Stevetrov (https://www.reddit.com/r/technicalfacto ... e_item_on/)
-What I learned by interacting with the above folks for my previous red factory (https://www.reddit.com/r/technicalfacto ... d_science/)
For testing, I use my own batch file that does the exact same but less fancy. I have used 50 alternating tries of each (so map_1, map_2, map_3, then map_1, etc, 50x), given there is alot of variability for the same map, even if nothing seems to be running in the background. Anything above 3 standard deviations is excluded as it is much more likely to be a one time ping for the antivirus/windows/etc than actual meaningful and repeatable UPS effects. Typically this means removal of 0 to 2 samples (ex: that big spike in the January 15 v5 results). 50000 ticks used.
Also, two half-belt inputs would be best for each lane, or even some variation on the number of lanes (why 6?) would be ideal, but it is unclear how the mod's infinite source/sink compare to in-game miners in terms of UPS per item "produced"/"consumed". The effect here would be to bias the results towards more or less lanes in comparison to half lanes produced by miners/trains/etc, so I did not investigate those avenues with the mod's sources & sinks.
10 beacon: Using disentius's v3 design as a starter, and with the techniques above, I got a bit more than 2% improvement
11 beacon: With an alternate layout using a few less beacons that DaveMcW's v5, and the techniques above, the 11 beacon build is very close to the 10 beacon build (less than 0.7%)
"Real case": To ensure a compressed output at a given output rate (here 45/s), it is usual to have slight overproduction to ensure back pressure exists on the client factory, which typically is good for UPS. With this idea, the furnaces are clocked more aggressively (843/1 for 10b and 783/1 for 11b) and have one factory outputting to a stub. Typically this also means you can use only the required assemblers/furnaces rather than underclocking them. Since the furnace will be full and an inserter waiting on a stopped transport line is sleeping according to the game engine, UPS usage is low, and ensures that the output rate is always maintained. The effect of using this idea is negligible in both 10 and 11 beacon builds.
I hope I didn't miss anything!
Based on the concepts elaborated in the links below, I have come to changes in design:
-Mechanics of Transport lines by Smurphy1 (https://www.reddit.com/r/technicalfacto ... ne_splits/)
-UPS efficient double sided belts by Stevetrov (https://www.reddit.com/r/technicalfacto ... e_item_on/)
-What I learned by interacting with the above folks for my previous red factory (https://www.reddit.com/r/technicalfacto ... d_science/)
For testing, I use my own batch file that does the exact same but less fancy. I have used 50 alternating tries of each (so map_1, map_2, map_3, then map_1, etc, 50x), given there is alot of variability for the same map, even if nothing seems to be running in the background. Anything above 3 standard deviations is excluded as it is much more likely to be a one time ping for the antivirus/windows/etc than actual meaningful and repeatable UPS effects. Typically this means removal of 0 to 2 samples (ex: that big spike in the January 15 v5 results). 50000 ticks used.
Also, two half-belt inputs would be best for each lane, or even some variation on the number of lanes (why 6?) would be ideal, but it is unclear how the mod's infinite source/sink compare to in-game miners in terms of UPS per item "produced"/"consumed". The effect here would be to bias the results towards more or less lanes in comparison to half lanes produced by miners/trains/etc, so I did not investigate those avenues with the mod's sources & sinks.
- steel_results_21_march.png (8.15 KiB) Viewed 4797 times
11 beacon: With an alternate layout using a few less beacons that DaveMcW's v5, and the techniques above, the 11 beacon build is very close to the 10 beacon build (less than 0.7%)
"Real case": To ensure a compressed output at a given output rate (here 45/s), it is usual to have slight overproduction to ensure back pressure exists on the client factory, which typically is good for UPS. With this idea, the furnaces are clocked more aggressively (843/1 for 10b and 783/1 for 11b) and have one factory outputting to a stub. Typically this also means you can use only the required assemblers/furnaces rather than underclocking them. Since the furnace will be full and an inserter waiting on a stopped transport line is sleeping according to the game engine, UPS usage is low, and ensures that the output rate is always maintained. The effect of using this idea is negligible in both 10 and 11 beacon builds.
I hope I didn't miss anything!
- Attachments
-
- Ghost_11b_v0.zip
- (1.22 MiB) Downloaded 102 times
-
- Ghost_11b_real.zip
- (1.16 MiB) Downloaded 96 times
-
- Ghost_10b_v0.zip
- (1.19 MiB) Downloaded 97 times
-
- Ghost_10b_real.zip
- (1.22 MiB) Downloaded 86 times
Re: UPS optimized Steel smelting to 1 blue belt
Awesome:) More views/testers more fun reproducible results. I recently found the smurphy post, and missed the stevetrov one. Study time, and I'll repeat your runs this week.
-
fallenghostplayer
- Manual Inserter
- Posts: 4
- Joined: Wed Mar 16, 2022 11:47 pm
- Contact:
Re: UPS optimized Steel smelting to 1 blue belt
For comparison, I've tested a 12 beacon design, specifically the one used by Smurphy1 in his UPS record megabase and I must say it compares rather well. Sure, its 2.7% slower than the current best 10 beacon build, but it definitely does not support the idea that 12 beacon builds are terribly inefficient.
- steel results 25 march.png (9.21 KiB) Viewed 4690 times
- Attachments
-
- Ghost_12b_real.zip
- (1.44 MiB) Downloaded 183 times
-
arthurdent86
- Manual Inserter
- Posts: 2
- Joined: Sat Sep 02, 2023 10:43 am
- Contact:
Re: UPS optimized Steel smelting to 1 blue belt
I tried to design a 8 beacon design that would be as ups efficient as possible. In my speedtests it was about as fast as disentius' design (which I modified slightly to get rid of the splitter), which is weird because that one uses 10 beacons. In both cases I used a map that produces 100 blue belts of steel. It would be really cool if someone could try to confirm my result since I've never done speedtests before and I might well have made some mistakes in testing this. I'll attach both maps I used (the map with disentius' design is called Speedtest_imported.zip)
edit: And can someone explain to me why my saves are so much larger than everybody else's?
This is my blueprint:
And this is the design by disentius I used (I made it kinda ugly, but it works):
edit: And can someone explain to me why my saves are so much larger than everybody else's?
This is my blueprint:
And this is the design by disentius I used (I made it kinda ugly, but it works):
- Attachments
-
- Speedtest_imported.zip
- (16.43 MiB) Downloaded 53 times
-
- Speedtest_mybestblue.zip
- (17.15 MiB) Downloaded 49 times
Re: UPS optimized Steel smelting to 1 blue belt
Hi Dent, welcome:)
Tips:
Use an empty editor map, with 2 mods:
- RegionCloner
- DeleteEmptyChunks (That is how to keep the map small.)
- In editor mode, you can set everything to map tiles, and do all research.
- You can use the express loader and infinity chest for output too, no need for inserters. (see maps enclosed)
- I use a script from velit to automate the tests, and run a local instance of the latest factorio experimental. (script is here: https://github.com/velit/Factorio-Benchmark-Powershell)
I see that I did my original test with Editor Extensions. It is not needed, so I ditched it.
Here are test of your setup, my original V3, and an smurphy1-advice optimized V4
test maps and empty maps attached. all maps have 50 blue belts of steel produced(ref: you would need 36.150 steel belts for 10K science per minute, including military). tests ran for 50000 ticks, each map ran 5 times.
Yours does as well as my V3:)
Tips:
Use an empty editor map, with 2 mods:
- RegionCloner
- DeleteEmptyChunks (That is how to keep the map small.)
- In editor mode, you can set everything to map tiles, and do all research.
- You can use the express loader and infinity chest for output too, no need for inserters. (see maps enclosed)
- I use a script from velit to automate the tests, and run a local instance of the latest factorio experimental. (script is here: https://github.com/velit/Factorio-Benchmark-Powershell)
I see that I did my original test with Editor Extensions. It is not needed, so I ditched it.
Here are test of your setup, my original V3, and an smurphy1-advice optimized V4
test maps and empty maps attached. all maps have 50 blue belts of steel produced(ref: you would need 36.150 steel belts for 10K science per minute, including military). tests ran for 50000 ticks, each map ran 5 times.
Yours does as well as my V3:)
- 2023-09-04 19_49_28-steel smelting results.png (68.29 KiB) Viewed 2424 times
- Attachments
-
- Dis-steel 10B V4 - 50.zip
- (2.74 MiB) Downloaded 77 times
-
- Dis-steel 10B V3 - 50.zip
- (3.05 MiB) Downloaded 51 times
-
- Dent86-steel 8B V1 - 50.zip
- (3.51 MiB) Downloaded 58 times
-
- empty.zip
- (653.19 KiB) Downloaded 47 times