PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Topics and discussion about specific mods
Erkigmo
Inserter
Inserter
Posts: 31
Joined: Sat Sep 23, 2023 9:43 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by Erkigmo »

ebbot88 wrote:
Fri Nov 10, 2023 9:36 pm
factorio-current.log

i cant start PyCoal Touched By an Angel with all the required mod
Pyanodons is more then just PyCP, however, I'll update the cache soon(ish). If you do full py (Pyanodons Alternative Energy) it should work

ebbot88
Manual Inserter
Manual Inserter
Posts: 2
Joined: Fri Nov 10, 2023 9:31 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by ebbot88 »

its works thx

aherou
Manual Inserter
Manual Inserter
Posts: 1
Joined: Thu Nov 23, 2023 7:36 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Ange Compatibility Patch

Post by aherou »

hi
all research need only automation science pack

mod
all bob, anglel, madclow, py
and just omnimatter

Otiz
Manual Inserter
Manual Inserter
Posts: 3
Joined: Mon Mar 14, 2016 5:10 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Ange Compatibility Patch

Post by Otiz »

aherou wrote:
Thu Nov 23, 2023 7:43 pm
hi
all research need only automation science pack

mod
all bob, anglel, madclow, py
and just omnimatter
I have the Same Problem. Any solution already for this problem ?

Erkigmo
Inserter
Inserter
Posts: 31
Joined: Sat Sep 23, 2023 9:43 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Ange Compatibility Patch

Post by Erkigmo »

Otiz wrote:
Sun Dec 03, 2023 8:21 pm
aherou wrote:
Thu Nov 23, 2023 7:43 pm
hi
all research need only automation science pack

mod
all bob, anglel, madclow, py
and just omnimatter
I have the Same Problem. Any solution already for this problem ?
Not yet. I am have had a lot of things going on, and I have not had time to fix it yet

Otiz
Manual Inserter
Manual Inserter
Posts: 3
Joined: Mon Mar 14, 2016 5:10 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by Otiz »

First. Thanks for your amazing work. This is really a huge Projekt.
I start a new game and try to play it. But i found two bugs. I play without Amator mod , but with all other "compatible" mods you listed. I Try to build Water with omniwater, but i dont found pipes. They are only comes with the basic-fluid-handling. Same with the Electricity. I can buld a bob-burner-generator, but i dont have small-electric-pole. This comes with the technology electricity. And i only have 10 Science packs. And without Electricity and Pipes i cant build everything i need to make Automation-science-packs.
I Hope its possible to fix it. I made 200 Sciencpacks with Lua-command. But this should not be the right solution for this ;-)

Erkigmo
Inserter
Inserter
Posts: 31
Joined: Sat Sep 23, 2023 9:43 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by Erkigmo »

Looks like the bugs you are experiencing are because of AAI. I have not done any work on AAI; it is just something from when King was developing this mod.

Erkigmo
Inserter
Inserter
Posts: 31
Joined: Sat Sep 23, 2023 9:43 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Ange Compatibility Patch

Post by Erkigmo »

Erkigmo wrote:
Mon Dec 04, 2023 12:53 am
Otiz wrote:
Sun Dec 03, 2023 8:21 pm
aherou wrote:
Thu Nov 23, 2023 7:43 pm
hi
all research need only automation science pack

mod
all bob, anglel, madclow, py
and just omnimatter
I have the Same Problem. Any solution already for this problem ?
Not yet. I am have had a lot of things going on, and I have not had time to fix it yet
This has been fixed, forgot to mention it.

Otiz
Manual Inserter
Manual Inserter
Posts: 3
Joined: Mon Mar 14, 2016 5:10 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by Otiz »

Erkigmo wrote:
Mon Dec 18, 2023 9:37 pm
Looks like the bugs you are experiencing are because of AAI. I have not done any work on AAI; it is just something from when King was developing this mod.
You are right. I deactivate AAI and the problem is totally gone. Thanks for the help.

phooenix
Inserter
Inserter
Posts: 28
Joined: Sat Jan 20, 2024 9:55 am
Contact:

Post by phooenix »

I get this error when trying to launch with an old mod setup, tweaked a little (I have played with angel bob py before) but i get this error when trying to launch:
"Fail with loading of mods"
Failed to load in mods:__Angelsrefining__/prototypes/override-functions.lua:972:attempt to index local 'pack' (a nil value)
stack traceback:
__angelsrifining__/prototypes/override-functions.lua.972: in function 'adjust_technology'
__angelsrefining__/prototypes/override-functions.lua:1012: in function 'execute'
__angelsrefining__/data-updates.lua:53: in main chunk

Mods to be deactivated:
angelsrefining (0.12.6)

EDIT: After reading here in this forum i tried deactivating all AAI mods but still get thrown the same error.

Image

Modlist:
Image

I don't demand someone to break down every mod but just a pointer would be helpful.
Also i would like to thank you for making this mod, i can't even begin to think of the headache with sorting everything out.
Last edited by phooenix on Sat Jan 20, 2024 10:19 am, edited 1 time in total.

Erkigmo
Inserter
Inserter
Posts: 31
Joined: Sat Sep 23, 2023 9:43 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by Erkigmo »

This is a known issue. Unfortunately, the error is with a bug in Angel's code, so I can't fix it within PyCoalTBaA. However, attached is a version of Angel's Refining that fixes the bug. This fix is in the dev version of Angel's (https://github.com/Arch666Angel/mods/co ... 9cd5e98110), but that has not been released to the mod portal yet. Hope this helps!
Attachments
angelsrefining_0.12.6.zip
(96.33 MiB) Downloaded 54 times

CaveGrinder
Inserter
Inserter
Posts: 35
Joined: Fri Aug 24, 2018 7:42 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by CaveGrinder »

Hey, thanks for working on this! i also tried it out now, but get a further issue:

Code: Select all

...
   3.588 Script @__stdlib__/stdlib/data/data.lua:146: NOTICE: Overwriting recipe/rocket-fuel
   3.588 Script @__stdlib__/stdlib/data/data.lua:146: NOTICE: Overwriting recipe/rocket-part
   3.588 Script @__stdlib__/stdlib/data/data.lua:146: NOTICE: Overwriting recipe/rocket-silo
   3.735 Error ModManager.cpp:1625: Fehler beim Laden der Mod „pypetroleumhandling“: __pycoalprocessing__/prototypes/functions/functions.lua:728: Don't use this
stack traceback:
	[C]: in function 'error'
	__pycoalprocessing__/prototypes/functions/functions.lua:728: in function 'hotairrecipes'
	__pypetroleumhandling__/data-updates.lua:173: in main chunk
   3.736 Loading mod core 0.0.0 (data.lua)
   3.860 Checksum for core: 2925842125
   3.895 Error ModManager.cpp:1625: Error in assignID: recipe-category with name 'crafting' does not exist.
with the following mods:

Code: Select all

angelsaddons-mobility_0.0.11
angelsaddons-storage_0.0.10
angelsbioprocessing_0.7.26
angelsindustries_0.4.20
angelsinfiniteores_0.9.11
angelspetrochem_0.9.25
angelsrefining_0.12.6
angelssmelting_0.6.22
bobassembly_1.2.1
bobelectronics_1.2.1
bobequipment_1.2.0
bobinserters_1.2.0
boblibrary_1.2.0
boblogistics_1.2.1
bobmining_1.2.0
bobmodules_1.2.0
bobores_1.2.0
bobplates_1.2.0
bobpower_1.2.0
bobwarfare_1.2.0
EvolutionThroughResearch_0.1.5
omnilib_4.1.40
omnimatter_4.1.37
omnimatter_water_4.1.7
pyalienlife_2.1.15
pyalienlifegraphics_2.0.7
pyalienlifegraphics2_2.0.9
pyalienlifegraphics3_2.0.8
pyalternativeenergy_1.2.10
pyalternativeenergygraphics_1.0.7
pycoalprocessing_2.1.14
pycoalprocessinggraphics_2.0.9
PyCoalTBaA_1.2.27
pyfusionenergy_2.0.8
pyfusionenergygraphics_2.0.1
pyhightech_2.0.13
pyhightechgraphics_2.0.3
pyindustry_2.0.12
pypetroleumhandling_2.1.13
pypetroleumhandlinggraphics_2.0.1
pypostprocessing_0.2.17
PyPPTBaA_1.1.2
pyrawores_2.4.13
pyraworesgraphics_2.0.2
rso-mod_6.2.25
stdlib_1.4.8
angelsrefining_0.12.6.zip i have taken from the attachment in the post above as i had the same error, this fixed it but its on to the next one.
actually i was wondering which of the py mods this one makes compatible, is the goal to support all or just pycoalprocessing?

Erkigmo
Inserter
Inserter
Posts: 31
Joined: Sat Sep 23, 2023 9:43 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by Erkigmo »

It should support all of the PyMods. I will look at the error tomorrow.

phooenix
Inserter
Inserter
Posts: 28
Joined: Sat Jan 20, 2024 9:55 am
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by phooenix »

Erkigmo wrote:
Sat Jan 20, 2024 4:32 pm
This is a known issue. Unfortunately, the error is with a bug in Angel's code, so I can't fix it within PyCoalTBaA. However, attached is a version of Angel's Refining that fixes the bug. This fix is in the dev version of Angel's (https://github.com/Arch666Angel/mods/co ... 9cd5e98110), but that has not been released to the mod portal yet. Hope this helps!
That version seems to fix the bug, even if the file had the same version name, thank you.

However i get more errors now, it looks like it's the same mod throwing errors as when i tried this mod compilation before (like a year ago).
I tried to sketch up and colour code so it's easier to get a bigger picture on everything, i will stare at it for an hour or two and think a bit and come with an update, maybe it will help...someone.

Right click and open in new window to see bigger picture, or click here: https://snipboard.io/5sK2nC.jpg

Image

Erkigmo
Inserter
Inserter
Posts: 31
Joined: Sat Sep 23, 2023 9:43 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by Erkigmo »

phooenix wrote:
Sun Jan 21, 2024 2:53 pm
However i get more errors now, it looks like it's the same mod throwing errors as when i tried this mod compilation before (like a year ago).
I tried to sketch up and colour code so it's easier to get a bigger picture on everything, i will stare at it for an hour or two and think a bit and come with an update, maybe it will help...someone.
I know the problem. What is happening is that PyPP can't decide which cache files to apply, because there are two equally good ones. This causes an error. I can fix this by just not registering the cache files that PyPPTBaA has.

phooenix
Inserter
Inserter
Posts: 28
Joined: Sat Jan 20, 2024 9:55 am
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by phooenix »

Erkigmo wrote:
Sun Jan 21, 2024 6:39 pm
phooenix wrote:
Sun Jan 21, 2024 2:53 pm
However i get more errors now, it looks like it's the same mod throwing errors as when i tried this mod compilation before (like a year ago).
I tried to sketch up and colour code so it's easier to get a bigger picture on everything, i will stare at it for an hour or two and think a bit and come with an update, maybe it will help...someone.
I know the problem. What is happening is that PyPP can't decide which cache files to apply, because there are two equally good ones. This causes an error. I can fix this by just not registering the cache files that PyPPTBaA has.
Wow...holy shit it actually works now, i tried loading the save that's been corrupt for like 3 years because i was stupid and updated some mods (couldn't revert back because the version i needed back then wasn't availible and was ignored when contacted mod dev) However...now i need to relearn my spaghetti megabase and since woodbricks now don't work to burn in my boilers im producing 100 wood bricks a second for nothing xD

Image

I have spent many hours trying to fix this in the past and now it just works, thanks!

Erkigmo
Inserter
Inserter
Posts: 31
Joined: Sat Sep 23, 2023 9:43 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by Erkigmo »

CaveGrinder wrote:
Sat Jan 20, 2024 6:53 pm

with the following mods:

Code: Select all

angelsaddons-mobility_0.0.11
angelsaddons-storage_0.0.10
angelsbioprocessing_0.7.26
angelsindustries_0.4.20
angelsinfiniteores_0.9.11
angelspetrochem_0.9.25
angelsrefining_0.12.6
angelssmelting_0.6.22
bobassembly_1.2.1
bobelectronics_1.2.1
bobequipment_1.2.0
bobinserters_1.2.0
boblibrary_1.2.0
boblogistics_1.2.1
bobmining_1.2.0
bobmodules_1.2.0
bobores_1.2.0
bobplates_1.2.0
bobpower_1.2.0
bobwarfare_1.2.0
EvolutionThroughResearch_0.1.5
omnilib_4.1.40
omnimatter_4.1.37
omnimatter_water_4.1.7
pyalienlife_2.1.15
pyalienlifegraphics_2.0.7
pyalienlifegraphics2_2.0.9
pyalienlifegraphics3_2.0.8
pyalternativeenergy_1.2.10
pyalternativeenergygraphics_1.0.7
pycoalprocessing_2.1.14
pycoalprocessinggraphics_2.0.9
PyCoalTBaA_1.2.27
pyfusionenergy_2.0.8
pyfusionenergygraphics_2.0.1
pyhightech_2.0.13
pyhightechgraphics_2.0.3
pyindustry_2.0.12
pypetroleumhandling_2.1.13
pypetroleumhandlinggraphics_2.0.1
pypostprocessing_0.2.17
PyPPTBaA_1.1.2
pyrawores_2.4.13
pyraworesgraphics_2.0.2
rso-mod_6.2.25
stdlib_1.4.8
You are missing Bob's Modules4Py, which is a required dependency for PyCoalTBaA. This makes it so that PyCoalTBaA doesn't load. If you activate Bob's Modules4Py, it should load.

hoho
Filter Inserter
Filter Inserter
Posts: 681
Joined: Sat Jan 18, 2014 11:23 am
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by hoho »

Is this supposed to function with full py + omni and no angel's? Getting an error on startup:
screen-2024-01-23-21-08-57.png
screen-2024-01-23-21-08-57.png (63.39 KiB) Viewed 2039 times
Reading the code it looks like it presumes angel's is always available, though it isn't set as a required mod.

phooenix
Inserter
Inserter
Posts: 28
Joined: Sat Jan 20, 2024 9:55 am
Contact:

Solder mixture requiring tin but wrong tin

Post by phooenix »

Is this something on my end that is wrong? Shouldn't tin be "homogenized" so it's the same across all mods?

Tin plate in my inventory says Bob's Metals, Chemicals and Intermediates mod > Pyanodons Raw Ores > Angel's Smelting, and the tin plate in input slot in factory just says Angel's Smelting.

EDIT: It was something in my end

Image

Erkigmo
Inserter
Inserter
Posts: 31
Joined: Sat Sep 23, 2023 9:43 pm
Contact:

Re: PyCoalTBaA or the PyCoal Touched by an Angel Compatibility Patch

Post by Erkigmo »

hoho wrote:
Tue Jan 23, 2024 7:09 pm
Is this supposed to function with full py + omni and no angel's?
Yes, I messed up (oops). However, PyCoalTBaA currently does not do anything with Omni.

Post Reply

Return to “Mods”