[MOD 0.11.x+ / 0.12.x] Boxing (v0.6.0)

Topics and discussion about specific mods
User avatar
Xecutor
Filter Inserter
Filter Inserter
Posts: 260
Joined: Mon Jun 23, 2014 10:15 am
Contact:

[MOD 0.11.x+ / 0.12.x] Boxing (v0.6.0)

Post by Xecutor »

No, it's not about sparring with biters. :)
Latest scientific researches discovered that if you put some goods into strong enough box made of steel and plastic,
and jump a bit to fit a little more, then result can be transported on transport belts, placed into boxes and in general behaves like an item!
However only basic items can be boxed. More complex and as a result more sensitive goods are breaking on jumping phase.

Update: After endless thinking, jumping and experimentation with sole, boxing scientists discovered some improvements to boxing technology.
Namely - boxing technology 2 aka advanced boxing! With this technology you can box even more stuff and even craft some circuits without unboxing ingredients!
Somewhere on the way recipe of steel box was optimized and box costs 3 steel plats less and have crafting time of 0.5 sec.

Steel box recipe:
1x steel
1x plastic bar

Items that can be boxed and unboxed:
50 coal, iron or copper ore
100 iron or copper plates
200 copper cables or electric circuits
Require boxing-2:
100 plastic bars
100 steel plates
100 advanced electronic circuits

Stack size of boxed goods is 10. Boxes are retained on unboxing.
Jumping was proven to be inefficient and inconsistent, therefore boxing and unboxing can only be done in AM2 and AM3.

After researching boxing-2 following two recipes are available:
2 boxes of iron plates+3 boxes of copper cables=1 box of electronic circuits+4 empty boxes
1 box of electronic circuits+2 boxes of plastic bars+2 boxes of copper cables=1 box of advanced circuits+4 empty boxes

With this mod central bus concept is a little more viable :)
Also, this mod makes 'mostly robots' factories designs MUCH more efficient.

I tested this mod. It contains only new items and recipes. No problem found. So I moved it. -- ssilk
Attachments
boxing_0.6.0.zip
(185.72 KiB) Downloaded 1707 times
boxing_0.5.0.zip
(130.45 KiB) Downloaded 523 times
Last edited by Xecutor on Sun Apr 05, 2015 4:44 am, edited 5 times in total.
tecxx
Long Handed Inserter
Long Handed Inserter
Posts: 62
Joined: Wed Jul 23, 2014 8:10 pm
Contact:

Re: [MOD 0.10.x] Boxing (v0.5.0)

Post by tecxx »

nice post ;)
i used the jumping method in this years christmas packaging process.
User avatar
L0771
Filter Inserter
Filter Inserter
Posts: 516
Joined: Tue Jan 14, 2014 1:51 pm
Contact:

Re: [MOD 0.10.x] Boxing (v0.5.0)

Post by L0771 »

It's like barrels but with items?
What about raw rood and coal?

Nice mod.
User avatar
Xecutor
Filter Inserter
Filter Inserter
Posts: 260
Joined: Mon Jun 23, 2014 10:15 am
Contact:

Re: [MOD 0.10.x] Boxing (v0.5.0)

Post by Xecutor »

L0771 wrote:It's like barrels but with items?
Yep.
L0771 wrote:What about raw rood and coal?
Basically I selected items for which express belt often is not enough :)
I never had coal/wood demand this high.
L0771 wrote:Nice mod.
Thanks :)
sillyfly
Smart Inserter
Smart Inserter
Posts: 1101
Joined: Sun May 04, 2014 11:29 am
Contact:

Re: [MOD 0.10.x] Boxing (v0.5.0)

Post by sillyfly »

I was actually thinking of making something like this myself. Nice to see someone beat me to it, so I don't have to do the work ;)

A few questions regarding details:
What is the assembly time for boxing? Is it the same for all boxed goods?
Do I get the boxes back when unboxing? (I assume I do not, but I want to make sure...)

As for balancing - this is only from thought I had previously, I have not actually played with this mod yet, but here is what I was thinking -
1. Maybe make it possible to make boxes out of various materials? For example - have a recipe for a steel box and a recipe for plastic box, both resulting in the same item, but giving the player a choice of which packing material they want to use... This probably only makes sense if the box is destroyed in the unpacking process. If you get it back it probably doesn't matter.
2. It seems to me that having a full stack in one box is really a lot. Even having 10-20 items in a box would multiply the effective throughput of any belt by that factor, so if you allow 20 Electronic Circuits in a box, you can use 1 Transport Belt to have the throughput of 20 of them transporting the raw items, which is equivalent to approx. 6 full Express belts... Did you ever really have that much Electronic Circuit demand?


Anyway - thank you for making this mod! I will definitely try it and come back with more concise thoughts.
User avatar
Xecutor
Filter Inserter
Filter Inserter
Posts: 260
Joined: Mon Jun 23, 2014 10:15 am
Contact:

Re: [MOD 0.10.x] Boxing (v0.5.0)

Post by Xecutor »

Boxing/unboxing time is 1 second. I set it to 10 seconds at first, but then in addition to already cumbersome unboxing you need to add buffering, which would bloat otherwise more ore less compact designs.

You retain box after unboxing. So, yes, you must use smart inserters for unloading of unboxing AM.

As for numbers... One stack was kind of natural starting point. I don't really feel like it's way too much.
Probably I won't ever need so high throughput, but on the other hand it's better to have limit that is almost unreachable than the one you can practically hit.
Need more playtesting and more opinions on this :)

Thank you for your interest and feedback.
Anathera
Inserter
Inserter
Posts: 29
Joined: Sat Jul 26, 2014 7:06 pm
Contact:

Re: [MOD 0.10.x+] Boxing (v0.5.0)

Post by Anathera »

This. Is. Cool.

This mod is perfect for my new play where i am doing separate small walled off factories that gets their resources by bots.
sillyfly
Smart Inserter
Smart Inserter
Posts: 1101
Joined: Sun May 04, 2014 11:29 am
Contact:

Re: [MOD 0.10.x+] Boxing (v0.5.0)

Post by sillyfly »

Making the box sizes smaller is not only a matter of balancing, it also concerns with the ability to split resources.
Having a 200-unit box forces me to work in 200-unit increments, which may be too much at times.
I'll play around with it and see if it really makes a difference, though. Maybe it's all just theoretical, and it doesn't really matter :)
Airat9000
Smart Inserter
Smart Inserter
Posts: 1418
Joined: Fri Mar 28, 2014 12:32 am
Contact:

Re: [MOD 0.10.x+] Boxing (v0.5.0)

Post by Airat9000 »

mor more resours!!
User avatar
ssilk
Global Moderator
Global Moderator
Posts: 12889
Joined: Tue Apr 16, 2013 10:35 pm
Contact:

Re: [MOD 0.10.x+] Boxing (v0.5.0)

Post by ssilk »

want to mention stuff:

Have written somthing like a review: https://forums.factorio.com/forum/vie ... ing#p66692

There is a bug with plastics: The stacksize is 100, but the box needs 200. Reducing the needed stuff in the plastic-box to 100 fixes it.

About the stack-sizes: After playing around now for several days I would the size for advanced circuit to 100. It is still quite much and would be a perfect balance. (1 box of copper wire + 1 box of iron plates = 1 box of circuits)

It would make sense to have boxes also for Coal, Stone and Steel bars. Especially coal.
Cool suggestion: Eatable MOUSE-pointers.
Have you used the Advanced Search today?
Need help, question? FAQ - Wiki - Forum help
I still like small signatures...
User avatar
Xecutor
Filter Inserter
Filter Inserter
Posts: 260
Joined: Mon Jun 23, 2014 10:15 am
Contact:

Re: [MOD 0.10.x+] Boxing (v0.5.0)

Post by Xecutor »

ssilk wrote:want to mention stuff:

Have written somthing like a review: https://forums.factorio.com/forum/vie ... ing#p66692

There is a bug with plastics: The stacksize is 100, but the box needs 200. Reducing the needed stuff in the plastic-box to 100 fixes it.

About the stack-sizes: After playing around now for several days I would the size for advanced circuit to 100. It is still quite much and would be a perfect balance. (1 box of copper wire + 1 box of iron plates = 1 box of circuits)

It would make sense to have boxes also for Coal, Stone and Steel bars. Especially coal.
Thank you for your feedback and general thoughts about mod :)
I know about plastic and already fixed this. But... Unfortunately I purchased The Binding of Isaac:Rebirth some time ago and got absorbed into it :(
Balancing of stacksize for circuits sounds reasonable. I'll make this change.
Coal... Might add this. Steel... Hm. I never actually had flow of steel high enough to want to use boxing for it :)
But may be...
Stone... Why one would need stone in such amounts?
katyal
Fast Inserter
Fast Inserter
Posts: 208
Joined: Wed Nov 12, 2014 8:42 pm
Contact:

Re: [MOD 0.10.x] Boxing (v0.5.0)

Post by katyal »

sillyfly wrote: Maybe make it possible to make boxes out of various materials? For example - have a recipe for a steel box and a recipe for plastic box, both resulting in the same item, but giving the player a choice of which packing material they want to use... This probably only makes sense if the box is destroyed in the unpacking process. If you get it back it probably doesn't matter.
How about choosing between reusable boxes and non-reusable boxes. What I had in mind was adding cardboard boxes that are destroyed when unboxing. Cardboard boxes would require wood, water and acid to make.
User avatar
ssilk
Global Moderator
Global Moderator
Posts: 12889
Joined: Tue Apr 16, 2013 10:35 pm
Contact:

Re: [MOD 0.10.x+] Boxing (v0.5.0)

Post by ssilk »

Stone and steel is quite optional. The point of them is just, that it would need less space and makes production faster. :)

...

What katyal said is also an interesting idea. I currently think a lot about it.

I mean, that the boxing and packing opens up a whole new world of new puzzles.

Some notes for me:
- different types of packing, different materials, depending on the packed material
- some packages open directly in the target assembly, others needs to be unpacked or refilled first
- some packages have remains and can be recycled, others disappear fully, or they are like the boxes
- some packs even dissolve when inserters grab them, or if put into a chest
- different material for packing

But some of those features really cannot be implemented with modding only, I think.
Cool suggestion: Eatable MOUSE-pointers.
Have you used the Advanced Search today?
Need help, question? FAQ - Wiki - Forum help
I still like small signatures...
User avatar
Xecutor
Filter Inserter
Filter Inserter
Posts: 260
Joined: Mon Jun 23, 2014 10:15 am
Contact:

Re: [MOD 0.10.x+] Boxing (v0.5.0)

Post by Xecutor »

Boxes of different materials while technically possible, will flood list of items, and especially packing/unpacking recipes.
When (and if) dev will allow items with some attached metainfo, and wildcard recipes as complement, then I'll gladly add more options.
ATM it is technically impossible to autounpack boxes when inserter picks them. There is no such event in modding api.
User avatar
ssilk
Global Moderator
Global Moderator
Posts: 12889
Joined: Tue Apr 16, 2013 10:35 pm
Contact:

Re: [MOD 0.10.x+] Boxing (v0.5.0)

Post by ssilk »

Yes I know. I just list the options, which might be interesting by gameplay.

I see those stuff also always as player option, cause the interesting things begin (with current experience) when we mix different packing techniques.
Cool suggestion: Eatable MOUSE-pointers.
Have you used the Advanced Search today?
Need help, question? FAQ - Wiki - Forum help
I still like small signatures...
User avatar
ssilk
Global Moderator
Global Moderator
Posts: 12889
Joined: Tue Apr 16, 2013 10:35 pm
Contact:

Re: [MOD 0.10.x+] Boxing (v0.5.0)

Post by ssilk »

I played now a lot more with it.

Idea: Assemblies/Furnaces, that can use the boxes directly.

Example:
- 1 box of iron and 1 of copper wire to assemble 100 circuits.
- 2 box iron, 2 copper wire, assembles a box of circuits and 3 empty boxes.
- 2 box of iron ore in furnace results in 1 box of iron plates and one empty box.
- etc.

The recipes takes of course quite long, but might be 5% faster than assembled in normal way. (not more, cause boxing alone gives them enough advantage)

Idea: Reduce costs of boxes. I think of 1 steel plate instead of 4. Cause you need incredible much iron to produce boxes.

Idea: Having assemblies, that can be delivered by robots directly.

Xecutor, I think it would be quite simple to introduce that, and I would like to write that for me, minimum the first idea... is that eventually also useful for this mod?


More stuff:

- I found, that the following boxing is missing (see above, I repeat it here):
Advanced circuits makes really sense. A box with 50 would be really cool, cause for creating modules you need now only some boxes of normal circuits, but really big amounts of advanced. Optional: Stone, coal and steel make sense only to spare space and for easier transport

- Production statistics isn't correct anymore, but not really know what could be done.

- off topic: This boxing should be supported in my eyes directly from the game. It should be no extra recipe to craft advanced circuits by the items or boxed items...
Cool suggestion: Eatable MOUSE-pointers.
Have you used the Advanced Search today?
Need help, question? FAQ - Wiki - Forum help
I still like small signatures...
User avatar
Xecutor
Filter Inserter
Filter Inserter
Posts: 260
Joined: Mon Jun 23, 2014 10:15 am
Contact:

Re: [MOD 0.10.x+] Boxing (v0.5.0)

Post by Xecutor »

It's easy to add receipt for circuits from boxed ingredients for regular AMs.
I'm not sure I want to add new AM that works with boxes exclusively,
since I'm not big fan of recolored AMs and I can't really draw something on my own :)
With furnace things are a little different. AFAIK furnace can't have two outputs. Or was it inputs? Either way it won't work.
I was thinking about reducing box cost too. Mb reduce crafting time too.
Assembler with requesting slots should be requested from devs, not me :)

The only thing that keeps me from adding more boxed stuff atm is my broken photoshop.
It's not starting. And I don't remember where distro is. So I need to find some time to fix PS.
I can, probably, try to install GIMP... But then again it will take some time to get accustomed to it.
User avatar
Xecutor
Filter Inserter
Filter Inserter
Posts: 260
Joined: Mon Jun 23, 2014 10:15 am
Contact:

Re: [MOD 0.10.x+] Boxing (v0.5.0)

Post by Xecutor »

ssilk wrote: - 1 box of iron and 1 of copper wire to assemble 100 circuits.
Actually it's 2 boxes of iron plates + 3 boxes of wires=1 box of circuits + 4 empty boxes (if I leave 200/box).
For advanced circuits it's 1 box of ec+2 boxes of plastic+2 boxes of wires=1 box of ac + 4 empty boxes (100/box).
User avatar
ssilk
Global Moderator
Global Moderator
Posts: 12889
Joined: Tue Apr 16, 2013 10:35 pm
Contact:

Re: [MOD 0.11.x+] Boxing (v0.6.0)

Post by ssilk »

:D
Cool suggestion: Eatable MOUSE-pointers.
Have you used the Advanced Search today?
Need help, question? FAQ - Wiki - Forum help
I still like small signatures...
User avatar
jockeril
Filter Inserter
Filter Inserter
Posts: 382
Joined: Sun Feb 08, 2015 11:04 am
Contact:

Re: [MOD 0.11.x+] Boxing (v0.6.0)

Post by jockeril »

Just d/l'd the mod to my Factorio main install running 0.11.20 and found that the "zip" file name (boxing-0.6.0.zip) should be changed to boxing_0.6.0.zip (use underscore instead of dash (-) )
My mods

Formerly Hebrew translator for FARL & EvoGUI - two mods I highly recommend for anyone to check-out

join me on
- Twitter[@jockeril],
- Twitch.tv/jockeril,
- Youtube/jocker-il (or JoCKeR-iL)
- and steam !
Image
Post Reply

Return to “Mods”