Edit: Apparently the bug is not with the chain signal, but with the rails connection. See below for more details.
Hi everyone! I think I've found a bug with the rail chain signal, but as I'm not sure I better ask you if am missing something with this.
I've been playing other games with chain signals like OpenTTD or Mashinky, and AFAIK, the chain signal in the image below should be blue instead of red:
As you can see, there's only one signal in red in the left side, and the chain signal is also in red when it should be blue. If I move that train from there, the chain signal becomes green. And if I put a train in the upper rail, the chain signal still stays in green:
More info, in case it could help:
- Both left rails are double-way stations.
- The right side are one-way rails, using one rail for each direction.
- All the left side signals are working as expected (even the chained ones are working well). The only one with the issue is th
I think this is an issue with the detection of the intersection; I've put that intersection trying to find out the closest place where I could put it: removing the rail until I found the first one showing the rails as blue (as apparently is the way the game tells us that it's a proper rail connection).
In the same map, I've more complicated intersections which work pretty well:
Do you think I should fill an issue with this? Or am I missing something?
Thanks in advance
Edit: Seems to be a bug, but I think it's related to the rails themselves, not the chain signal. With the rails connected like in the image above the train can freely move from the left side to the right side, but when trying to go back to the left side, you can only go to the rail below.
Edit2: Now I see that the red lines above the rails properly show me that they are not properly connected.
[Resolved] Rails connection issue
-
- Burner Inserter
- Posts: 6
- Joined: Sun Sep 30, 2018 11:11 am
- Contact:
[Resolved] Rails connection issue
Last edited by elboletaire on Sun Sep 30, 2018 12:16 pm, edited 4 times in total.
Re: Issue with rail chain signal
It looks like you can't actually drive from the red chain signal to the open green one, because the rails in the crossing are not connected. If you try to space it out more, it should connect and work properly.
-
- Burner Inserter
- Posts: 6
- Joined: Sun Sep 30, 2018 11:11 am
- Contact:
Re: Issue with rail chain signal
Ok, I can confirm this is a bug, as moving the intersection one block away fixes the issue with the signal:
I'm editing my post to add all the required information for a bug report; I'll need the help of a mod to move the post to bug reports when done btw. Note that I've already searched for this bug report without success, so if I missed it, and it's already reported, please, point me out
I'm editing my post to add all the required information for a bug report; I'll need the help of a mod to move the post to bug reports when done btw. Note that I've already searched for this bug report without success, so if I missed it, and it's already reported, please, point me out
-
- Burner Inserter
- Posts: 6
- Joined: Sun Sep 30, 2018 11:11 am
- Contact:
Re: Issue with rail chain signal
Yes, the issue is not with the chain signal, but with the game showing me that "blue overlay" when adding the rail, which makes me think the rails are properly connected.
-
- Burner Inserter
- Posts: 6
- Joined: Sun Sep 30, 2018 11:11 am
- Contact:
Re: Issue with rail chain signal
BTW I could understand this is not an issue but a feature, and that I should know which are the train intersection limits, but fixing the behavior of the blue overlay to not be shown under this case may avoid future confusions.
Here's an image showing the "blue overlay" which I'm saying:
Here's an image showing the "blue overlay" which I'm saying:
-
- Smart Inserter
- Posts: 1161
- Joined: Sat Mar 17, 2018 1:20 pm
- Contact:
Re: Issue with rail chain signal
I might not be looking at you problem correctly, but I don't see a red *chain* signal. I see a red *normal* signal.
If I am interpreting what I see correctly, you might have missed a little detail about signals... They go on the right side of the track, and if you have one on the left, it applies to trains going in the opposite direction.
If I am interpreting what I see correctly, you might have missed a little detail about signals... They go on the right side of the track, and if you have one on the left, it applies to trains going in the opposite direction.
-
- Burner Inserter
- Posts: 6
- Joined: Sun Sep 30, 2018 11:11 am
- Contact:
Re: Issue with rail chain signal
Maybe here you can see it better:zOldBulldog wrote: ↑Sun Sep 30, 2018 11:56 amI might not be looking at you problem correctly, but I don't see a red *chain* signal. I see a red *normal* signal.
If I am interpreting what I see correctly, you might have missed a little detail about signals... They go on the right side of the track, and if you have one on the left, it applies to trains going in the opposite direction.
As stated in my first post, the left side are two stations with two-way rails. The right side is also two way, but using two rails (one for each direction); that's why the right side does not have signals in one side, to make them one-way.
Re: Issue with rail chain signal
As HanziQ already said, the upper station is not reachable from the red chainsignal, all you have shown so far is working correctly.elboletaire wrote: ↑Sun Sep 30, 2018 12:01 pmAs stated in my first post, the left side are two stations with two-way rails. The right side is also two way, but using two rails (one for each direction); that's why the right side does not have signals in one side, to make them one-way.
-
- Smart Inserter
- Posts: 1161
- Joined: Sat Mar 17, 2018 1:20 pm
- Contact:
Re: [0.16.51] Rails connection issue
I see it now.
1) It applies to trains coming from the right.
2) It is caused by the train coming in the opposite direction.
3) The intersection between them is not right. It is not the 2-2 split you intended, but two 1-2 splits that overlap. Trains can't turn into both directions. So the chain signal does not see an open option to the other rail, but only the single rail that goes to the red normal signal... So it is correctly red.
1) It applies to trains coming from the right.
2) It is caused by the train coming in the opposite direction.
3) The intersection between them is not right. It is not the 2-2 split you intended, but two 1-2 splits that overlap. Trains can't turn into both directions. So the chain signal does not see an open option to the other rail, but only the single rail that goes to the red normal signal... So it is correctly red.
-
- Burner Inserter
- Posts: 6
- Joined: Sun Sep 30, 2018 11:11 am
- Contact:
Re: [0.16.51] Rails connection issue
Then I guess this post can stay here for anyone like me, who doesn't know this
I'm changing the title to note it has been resolved. Thanks to everyone