0.15 - solar panels & accumulators

[jaypee]

So with the increase in electric-range of the accumulators, it's possible to get a good 20:24 accumulator:panel ratio with one substation. The problem is now to find a way to arrange everything.

I like arrangements that are:
- square on the edges
- compact
- tesselatable (tesselible?)

Here's my first crack at this:



thoughts? it's *sorta* tesselable but maybe not at nice clean 90-degree angles? could i learn to live with the wasted space at the corners?

[Frightning]

So with the increase in electric-range of the accumulators, it's possible to get a good 20:24 accumulator:panel ratio with one substation. The problem is now to find a way to arrange everything.

I like arrangements that are:
- square on the edges
- compact
- tesselatable (tesselible?)

Here's my first crack at this:



thoughts? it's *sorta* tesselable but maybe not at nice clean 90-degree angles? could i learn to live with the wasted space at the corners?

This is a problem I am going to have to deal with as well. I had a nice 100% space usage setup for old Substation supply area (14x14), where I would have 16-12 panel-accumulator ratio, and would then just put down an occasional 48 accumulator Substation (so that I would keep the 25x21 ratio; I would also leave the last Substation group or 2 unfinished between dropping fresh sets of panels and accumulators and finish it to start off the next set). Lead to a nice, perfect tileable grid. With the new size, I will need to rethink my layout, but as long as you lean panel heavy, the same tactic of occasionally dropping a pure accumulator block should work nicely.

[jaypee]

This is a problem I am going to have to deal with as well. I had a nice 100% space usage setup for old Substation supply area (14x14), where I would have 16-12 panel-accumulator ratio, and would then just put down an occasional 48 accumulator Substation (so that I would keep the 25x21 ratio; I would also leave the last Substation group or 2 unfinished between dropping fresh sets of panels and accumulators and finish it to start off the next set). Lead to a nice, perfect tileable grid. With the new size, I will need to rethink my layout, but as long as you lean panel heavy, the same tactic of occasionally dropping a pure accumulator block should work nicely.

yeah that's p much what i used to do too...

i think this new setup of mine *is* tessel-ready but at a slight diagonal? Will post a screenshot if/when I can make it work

[Mr. Tact]

Wow, never tried to figure out one of these templates for myself before. It's tougher than I thought it would be to get the setup be symmetrical and have the correct ratio...

[Frightning]

Wow, never tried to figure out one of these templates for myself before. It's tougher than I thought it would be to get the setup be symmetrical and have the correct ratio...

The trick I used was to just be panel heavy and then plop down a Substation of pure Accumulators every so often to keep the counts at the 0.84 ratio.

[Mr. Tact]

Well... I was trying to do a 4x4 substation setup... so a bit more complicated...

[impetus maximus]

i just make grids of each separate. add more as needed. ratios? pfft
i had a system with the old sub stations that was a 2x2 grid where you had to rotate to connect the 4 substation corners.
medium power poles between the 2x2 'banks' which you could walk though. was proud when i figured that out.

now we have 6x6 panels,and 9x9 accumulators that fit perfectly inside the sub stations. they made it too easy now.

[Mr. Tact]

now we have 6x6 panels,and 9x9 accumulators that fit perfectly inside the sub stations. they made it too easy now.

Err, 6x6 panels and 9x9 accumulators? I take it that's from a mod?

[impetus maximus]

now we have 6x6 panels,and 9x9 accumulators that fit perfectly inside the sub stations. they made it too easy now.

Err, 6x6 panels and 9x9 accumulators? I take it that's from a mod?

a grid of 6 solar panels wide fit inside the sub stations, 9 accumulators wide.

[Frightning]

now we have 6x6 panels,and 9x9 accumulators that fit perfectly inside the sub stations. they made it too easy now.

Err, 6x6 panels and 9x9 accumulators? I take it that's from a mod?

a grid of 6 solar panels wide fit inside the sub stations, 9 accumulators wide.

Hmm, so I think a good pair of layouts would be:

6x6 of panels with middle 2x2 instead a 3x3 of accumulators with middle instead the Substation. Then, to offset the excess panels, have some pure 9x9s of Accumulators (with center replaced by Substation).

[mergele]

That hole tesselable-thing, do you mean "tileable"?

[Frightning]

That hole tesselable-thing, do you mean "tileable"?

The proper mathematical term is actually tessellation (and as an adjective, tessellatable). (see https://en.wikipedia.org/wiki/Tessellation)

[jaypee]

That hole tesselable-thing, do you mean "tileable"?

The proper mathematical term is actually tessellation (and as an adjective, tessellatable). (see https://en.wikipedia.org/wiki/Tessellation)

ye...yeah. yeah that's the word i was looking for.

[Gecko]

After not so long of a fiddling, IMHO this is a fair solution. Without the robo-port integration but two robo-ports in your power armor (one is not enough as shown), you can comfortably walk next to the blueprint and all tiles will be reached.

Replace one accumulator near the edge with a big pole and you can leave walking space for better building of the adjacent ones.

Cheers

SolarFarmFac.png (1.15 MiB) Viewed 26542 times

[Gecko]

As I got annoyed by the fact that I had to place all the solar panels on my own, I tried to design a solar farm with robo-port integration.

Here is what I came up with. For sure not optimal space use and also not hitting the ratio (0.86 instead of 0.84) but quite good for a start. Please go ahead and improve as you see fit!

The idea is that you can replace any 2x2 solar panel square with a 3x3 accumulator square.
So from a mathematical point of view the first integer you can get from this division considering the 0.84 ratio is
75 solar to 63 accumulator which means 25x a 2x2 solar square plus 7x a 3x3 accumulator square. Now you can puzzle this together around a robo port (Wouldn't work, I tried it ) .

Well, eventually you get a kind of solution where you have to fit the power poles, too.

Cheers

Factorio Exchange string

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

SolarFarmRobo.PNG (963 KiB) Viewed 25969 times

[paouk]

it's possible to get a good 20:24 accumulator:panel ratio

Exactly.

I personally prefer as smaller as possible configurations.Blueprinting them where and when i need.
Substation aside (these are more expensive in terms of resources i'm going with these in my current base.

EDIT:

This is my 20:24 configuration


and its blueprint:

Code: Select all

0eNqd2G1rgzAQAOD/ks92mFejf2WU4WwYAY3iy1gp/e/TdowxLi+XT8VinuZ653HxRt77zUyzdStpbsR2o1tI83oji/1wbX98t14nQxpiVzOQgrh2OK6WsW/n09Q605N7Qay7mC/S0HuRuZJlr+TZK8X9XBDjVrta8wz6cXF9c9vwbuY9nF9gMBe7DSfTm26dbXeaxt7s/DQu++LRHT+8gyddkOv+Qcv7sal/GsNqNKRxpKZCmPjF2q7bhq1v13EGdlS/yCejXyTkyESnijgq0ZERp0p0eMTRiQ6NOHWaU0YYWqY5LObQNEfEHJbmqJjD0xwdcwT45AP1/GRgRCYiKoSoRISFkCoNoSFDpxkyZNRphg4YrER3wZ+wBMihW7QIadgWzUMYtkMfT7VfQ5Y0AxFkScMIsqRhBFfSsIEradjAlTRo8BKVGgoaFJUZ2GCoxMAGx+QFJgQmLTAhMVmBCZXZZzioVagUg08w16gUw0ad1+7AoESJqhdwQ4Ji6gUm8pouHBLH1B68HYGpPZiQeZ0fDkkhZ/MKnolEhZzNfY5GzuY+p0bO5h5HlsjZ3OdQ3GzuYxhuNPcxHDeZ+xiBG8x9jMTN5T5G5Z2naxCr8o7TMKazTtO7dS6erxqaP+9RCvJp5uVxsxKCScW4lPs/8g1rL7cw

[Lav]

Am I the only one who simply installs solar panels and accumulators separately in large amounts, without much regard to proportions?

Because, you know, there's no such thing as too much power. And considering laser turrets, there's no such thing as too much stored power, either.

[paouk]

Am I the only one who simply installs solar panels and accumulators separately in large amounts, without much regard to proportions?

Because, you know, there's no such thing as too much power. And considering laser turrets, there's no such thing as too much stored power, either.

I don't think you're the only one. I've seen different pictures representig that building layout you're saying, Actually some of the devs seems to use this
(from link posted here https://www.factorio.com/blog/post/fff-187)


Sometimes i do it too, especially on first setups when i prioritize the accumulators to backup power for laser turrets peaks. It has also a good decorative posibility, if it would make sense when you're ther, mass polluthig an hosting planet

Anyway, the only problem with the "separate style" layout, imo, is that you would build up them few by few. In separate places, finishing build there disorganized and sparse and having less control on balance/ratio.

Obviusly you can always place down XGw bonused reactors somewhere abbandoning these thoughts to have new ones.

[impetus maximus]

Am I the only one who simply installs solar panels and accumulators separately in large amounts, without much regard to proportions?

Because, you know, there's no such thing as too much power. And considering laser turrets, there's no such thing as too much stored power, either.

you are not alone.

[BlakeMW]

Am I the only one who simply installs solar panels and accumulators separately in large amounts, without much regard to proportions?

Because, you know, there's no such thing as too much power. And considering laser turrets, there's no such thing as too much stored power, either.

I also do. There are genuine merits to using the proper ratio but it's not hard to bring the ratio into vaguely proper proportions, like if you have 1000 solar panels you should have 840 accus. I always feel more solar panels is better than more accumulators because failing to fully recharge during the day sucks.