[2.0.42] Lag with some graphics settings on Linux
Posted: Wed Apr 02, 2025 3:07 pm
Hi, I've run into some graphical issues with the Linux native runtime. When running on the native build, the options for Fog, Space Dust, and Animated Water cause the FPS to tank. This happens across different distros, but does not happen on Proton. Screenshots attached, runs at 60/60 with them disabled or on Proton, but both Arch and Mint drop to 22/60 on Gleba, with less performance loss in space. My current system is overkill enough that there should be no hardware problems, and install was through Steam, so there shouldn't be any weird dependency issues. I also tried multiple kernel versions when the problem started with a pure Mint setup, so it's not a dual-boot or kernel version issue.
Output of inxi -Fxxxrz on Mint
I can throw up more information as needed, any potential fixes would be appreciated.
EDIT: fixed in 2.0.43
Output of inxi -Fxxxrz on Mint
Code: Select all
System:
Kernel: 6.8.0-57-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0
clocksource: tsc
Desktop: Cinnamon v: 6.4.8 tk: GTK v: 3.24.41 wm: Muffin v: 6.4.1 vt: 7
dm: LightDM v: 1.30.0 Distro: Linux Mint 22.1 Xia base: Ubuntu 24.04 noble
Machine:
Type: Desktop Mobo: Gigabyte model: B650 AORUS ELITE AX
serial: <superuser required> uuid: <superuser required> UEFI: American
Megatrends LLC. v: FB3g date: 12/19/2024
CPU:
Info: 8-core model: AMD Ryzen 7 9800X3D bits: 64 type: MT MCP smt: enabled
arch: N/A rev: 0 cache: L1: 640 KiB L2: 8 MiB L3: 96 MiB
Speed (MHz): avg: 2304 high: 4158 min/max: 600/5269 cores: 1: 4149 2: 600
3: 3087 4: 4139 5: 2911 6: 4158 7: 600 8: 2483 9: 600 10: 4145 11: 600
12: 3452 13: 600 14: 600 15: 4148 16: 600 bogomips: 150121
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
Device-1: AMD Navi 31 [Radeon RX 7900 XT/7900 XTX/7900M]
vendor: XFX RX-79XMERCB9 driver: amdgpu v: kernel arch: RDNA-3 pcie:
speed: 16 GT/s lanes: 16 ports: active: none empty: DP-1, DP-2, DP-3,
HDMI-A-1, Writeback-1 bus-ID: 03:00.0 chip-ID: 1002:744c class-ID: 0300
Device-2: AMD vendor: Gigabyte driver: amdgpu v: kernel pcie:
speed: 16 GT/s lanes: 16 ports: active: DP-5 empty: DP-4, DP-6, HDMI-A-2,
Writeback-2 bus-ID: 14:00.0 chip-ID: 1002:13c0 class-ID: 0300 temp: 38.0 C
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X:
loaded: amdgpu unloaded: fbdev,modesetting,radeon,vesa dri: radeonsi
gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00")
s-diag: 777mm (30.58")
Monitor-1: DP-5 mapped: DisplayPort-4 model: Acer VG272U V3
serial: <filter> res: 2560x1440 dpi: 109 size: 597x336mm (23.5x13.23")
diag: 685mm (27") modes: max: 2560x1440 min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: radeonsi device: 2 drv: swrast gbm: drv: kms_swrast
surfaceless: drv: radeonsi x11: drv: radeonsi inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa
v: 24.2.8-1ubuntu1~24.04.1 glx-v: 1.4 direct-render: yes renderer: AMD
Radeon Graphics (radeonsi raphael_mendocino LLVM 19.1.1 DRM 3.57
6.8.0-57-generic) device-ID: 1002:13c0
Audio:
Device-1: AMD Navi 31 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
speed: 16 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:ab30 class-ID: 0403
Device-2: Creative Labs CA0108/CA10300 [Sound Blaster Audigy Series]
driver: snd_emu10k1 v: kernel bus-ID: 08:00.0 chip-ID: 1102:0008
class-ID: 0401
Device-3: AMD Rembrandt Radeon High Definition Audio driver: snd_hda_intel
v: kernel pcie: speed: 16 GT/s lanes: 16 bus-ID: 14:00.1 chip-ID: 1002:1640
class-ID: 0403
Device-4: AMD Family 17h/19h HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s lanes: 16
bus-ID: 14:00.6 chip-ID: 1022:15e3 class-ID: 0403
Device-5: HP HyperX Virtual Surround Sound
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 12 Mb/s
lanes: 1 bus-ID: 1-3.3:6 chip-ID: 03f0:0b92 class-ID: 0300
serial: <filter>
API: ALSA v: k6.8.0-57-generic status: kernel-api
Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
Device-1: Realtek RTL8852CE PCIe 802.11ax Wireless Network
driver: rtw89_8852ce v: kernel pcie: speed: 5 GT/s lanes: 1 port: c000
bus-ID: 0a:00.0 chip-ID: 10ec:c852 class-ID: 0280
IF: wlp10s0 state: down mac: <filter>
Device-2: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel
pcie: speed: 5 GT/s lanes: 1 port: b000 bus-ID: 0b:00.0 chip-ID: 10ec:8125
class-ID: 0200
IF: enp11s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: nordlynx state: unknown speed: N/A duplex: N/A mac: N/A
Bluetooth:
Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.0
speed: 12 Mb/s lanes: 1 bus-ID: 1-9:5 chip-ID: 0bda:0852 class-ID: e001
serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.3
lmp-v: 12 sub-v: 7225 hci-v: 12 rev: 40d class-ID: 6c0104
RAID:
Supported mdraid levels: raid1 raid0 raid6 raid5 raid4 raid10
Device-1: md127 type: mdraid level: mirror status: active size: 7.28 TiB
Info: report: 2/2 UU blocks: 7813894464 chunk-size: N/A super-blocks: 1.2
Components: Online: 0: sda 1: sdb
Drives:
Local Storage: total: raw: 16.37 TiB usable: 9.1 TiB used: 2.18 TiB (23.9%)
ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 990 PRO 1TB size: 931.51 GiB
speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: 4B2QJXD7
temp: 35.9 C scheme: GPT
ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 990 PRO 1TB size: 931.51 GiB
speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: 4B2QJXD7
temp: 34.9 C
ID-3: /dev/sda vendor: Western Digital model: WD80EAAZ-00BXBB0
size: 7.28 TiB speed: 6.0 Gb/s tech: HDD rpm: 5640 serial: <filter>
fw-rev: 1A01
ID-4: /dev/sdb vendor: Western Digital model: WD80EAAZ-00BXBB0
size: 7.28 TiB speed: 6.0 Gb/s tech: HDD rpm: 5640 serial: <filter>
fw-rev: 1A01
Partition:
ID-1: / size: 124.93 GiB used: 13.82 GiB (11.1%) fs: ext4
dev: /dev/nvme0n1p3
ID-2: /home size: 599.86 GiB used: 53.74 GiB (9.0%) fs: ext4
dev: /dev/nvme0n1p5
Swap:
ID-1: swap-1 type: partition size: 64 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p4
Sensors:
System Temperatures: cpu: 42.0 C mobo: 27.0 C
Fan Speeds (rpm): N/A
GPU: device: amdgpu temp: 39.0 C device: amdgpu temp: 39.0 C mem: 46.0 C
fan: 134 watts: 63.00
Repos:
Packages: 2303 pm: dpkg pkgs: 2291 pm: flatpak pkgs: 12
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/cappelikan-ppa-noble.list
1: deb [signed-by=/etc/apt/keyrings/cappelikan-ppa-noble.gpg] https://ppa.launchpadcontent.net/cappelikan/ppa/ubuntu noble main
Active apt repos in: /etc/apt/sources.list.d/nordvpn.list
1: deb https://repo.nordvpn.com/deb/nordvpn/debian stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://packages.linuxmint.com xia main upstream import backport
2: deb http://archive.ubuntu.com/ubuntu noble main restricted universe multiverse
3: deb http://archive.ubuntu.com/ubuntu noble-updates main restricted universe multiverse
4: deb http://archive.ubuntu.com/ubuntu noble-backports main restricted universe multiverse
5: deb http://security.ubuntu.com/ubuntu/ noble-security main restricted universe multiverse
Info:
Memory: total: 60 GiB note: est. available: 60.44 GiB
used: 10.31 GiB (17.1%)
Processes: 423 Power: uptime: 2h 52m states: freeze,mem,disk suspend: deep
wakeups: 0 hibernate: platform Init: systemd v: 255 target: graphical (5)
default: graphical
Compilers: gcc: 13.3.0 Shell: Bash v: 5.2.21 running-in: gnome-terminal
inxi: 3.3.34
EDIT: fixed in 2.0.43