[0.15.x] Bob's Mods: General Discussion

Some mods, made by Bob. Basically streaks every Factroio-area.

Moderator: bobingabout

User avatar
Klonan
Factorio Staff
Factorio Staff
Posts: 5290
Joined: Sun Jan 11, 2015 2:09 pm
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by Klonan »

orzelek wrote:Would you be willing to add logistics/construction robots battery capacity research?
Support for it was just added in 0.15.20 and it's effect name for tech would be

Code: Select all

worker-robot-battery
(I think - asked in release thread to confirm).
Feel free to use this mod as reference:

https://mods.factorio.com/mods/Klonan/R ... y_Research
qwerter96
Long Handed Inserter
Long Handed Inserter
Posts: 53
Joined: Fri Feb 10, 2017 3:15 am
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by qwerter96 »

ukezi wrote:yeap tier 2 gets incresed from 1 tinned and one carbon to 2 of each. at tier 3 mostly plastic goes up the other stuff doesn't matter much any way. How About an additonal tier of electronic assembly between currently tier 1 and 2 with speed of 1.5 and basic electronic boards in the cost? an equivalent to assembler 2 is missing currently.
While on the topic of electronic assembly machines, have you considered adding raw wood -> wood/resin to them. I know they don't really fit thematically, but mechanically those ingredients are used in manufacturing boards and are typically made onsite with out of place regular assembly machines...
Recon777
Filter Inserter
Filter Inserter
Posts: 267
Joined: Fri Jun 10, 2016 4:04 am
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by Recon777 »

qwerter96 wrote:
ukezi wrote:yeap tier 2 gets incresed from 1 tinned and one carbon to 2 of each. at tier 3 mostly plastic goes up the other stuff doesn't matter much any way. How About an additonal tier of electronic assembly between currently tier 1 and 2 with speed of 1.5 and basic electronic boards in the cost? an equivalent to assembler 2 is missing currently.
While on the topic of electronic assembly machines, have you considered adding raw wood -> wood/resin to them. I know they don't really fit thematically, but mechanically those ingredients are used in manufacturing boards and are typically made onsite with out of place regular assembly machines...
I have to agree that it's a bit awkward. It works either way, but aesthetically, it's much smoother to create a chip/board layout with all the same sized assemblers.
Aeternus
Filter Inserter
Filter Inserter
Posts: 835
Joined: Wed Mar 29, 2017 2:10 am
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by Aeternus »

Or, optionally, instead of moving wood over via belt or requestor chest, you can turn wood (or heavy oil) into resin and send that instead. That way you don't process resin at the electronics facility, but keep that at the wood processing facility. Same goes for making boards.
Recon777
Filter Inserter
Filter Inserter
Posts: 267
Joined: Fri Jun 10, 2016 4:04 am
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by Recon777 »

Aeternus wrote:Or, optionally, instead of moving wood over via belt or requestor chest, you can turn wood (or heavy oil) into resin and send that instead. That way you don't process resin at the electronics facility, but keep that at the wood processing facility. Same goes for making boards.
Except you need both resin and wood (boards) in your electronics line. So it becomes a choice of belting in more items or just processing the logs locally.
buggy123
Long Handed Inserter
Long Handed Inserter
Posts: 64
Joined: Sat May 13, 2017 11:53 pm
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by buggy123 »

Would it be reasonably possible to have custom inserters show their pickup/drop location before you place them? It'd help a lot, I couldn't count how many times i've placed a inserter and had to pick it up again because i misjudged or mirrored the pickup/drop location.
User avatar
bobingabout
Smart Inserter
Smart Inserter
Posts: 7352
Joined: Fri May 09, 2014 1:01 pm
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by bobingabout »

buggy123 wrote:Would it be reasonably possible to have custom inserters show their pickup/drop location before you place them? It'd help a lot, I couldn't count how many times i've placed a inserter and had to pick it up again because i misjudged or mirrored the pickup/drop location.
Unfortunately not. The game does not provide an interface to change the "in hand" specifications. The best I can do with the "pre-place" configuration is to change the inserter to what your configuration says on the tick immediately following the one where you've placed it.
Creator of Bob's mods. Expanding your gameplay since version 0.9.8.
I also have a Patreon.
adamcirillo
Inserter
Inserter
Posts: 34
Joined: Fri Feb 10, 2017 9:20 am
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by adamcirillo »

assembly machine 3 needs the tier 3 circuit yet assembly machine four needs the tier 2 is something wrong with the recipe? or would that be a mod conflict?
User avatar
bobingabout
Smart Inserter
Smart Inserter
Posts: 7352
Joined: Fri May 09, 2014 1:01 pm
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by bobingabout »

adamcirillo wrote:assembly machine 3 needs the tier 3 circuit yet assembly machine four needs the tier 2 is something wrong with the recipe? or would that be a mod conflict?
Assembly 3 needs "Electronic circuit board" (base game's advanced circuit) the same as Assembly 4. if this is not the case, I'd go with a mod conflict.
Creator of Bob's mods. Expanding your gameplay since version 0.9.8.
I also have a Patreon.
adamcirillo
Inserter
Inserter
Posts: 34
Joined: Fri Feb 10, 2017 9:20 am
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by adamcirillo »

it seems aai industry is causing the problem
Corvenus
Burner Inserter
Burner Inserter
Posts: 12
Joined: Mon Jun 27, 2016 9:51 pm
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by Corvenus »

Not sure if its a bug or or working as intended but there doesn't seem to be an accumulator mk2 there are mark2 and 3 of the fast, slow and high capacity versions but none for the base accumulator

we are running a few mods as well as all of yours but nothing that as far as I know affects this in any way but can provide a full list if this would help
User avatar
bobingabout
Smart Inserter
Smart Inserter
Posts: 7352
Joined: Fri May 09, 2014 1:01 pm
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by bobingabout »

That sounds right. The original "Basic Accumulator" as it used to be called, is the gateway technology. From that point it then forks into the specialised versions, Fast, High capacity and Slow. Slow will guarantee you have power all night long, High capacity is your main power reserve banks, and Fast is best used to fast charge, fast discharge in certain buffer scenarios.
Creator of Bob's mods. Expanding your gameplay since version 0.9.8.
I also have a Patreon.
Corvenus
Burner Inserter
Burner Inserter
Posts: 12
Joined: Mon Jun 27, 2016 9:51 pm
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by Corvenus »

thanks for confirming, guess i should have checked sooner so we didn't have such a large number of the basic ones build as we were expecting to just upgrade them like everything else seems to
hackers238
Manual Inserter
Manual Inserter
Posts: 3
Joined: Sun Jun 18, 2017 11:24 pm
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by hackers238 »

EDIT: Bob posted the answer to this here, thanks! viewtopic.php?f=51&t=49945#p290093

Hello! Absolutely love these mods, I'm currently doing my first run with Bobs + Angels on Peaceful. Everything was going great, but I can't research the rocket silo and I've researched everything else it says I need. Sorry to post this here, I'm not sure what mod(s) are causing it. Here's the complete list (Bobs + Angels, no updates needed):
  • angelsbioprocessing 0.4.0
    angelscomponents 0.2.0
    angelsinfiniteores 0.6.11
    angelslogistics 0.2.0
    angelspetrochem 0.5.9
    angelsrefining 0.7.14
    angelssmelting 0.3.3
    base 0.15.21
    bobassembly 0.15.6
    bobelectronics 0.15.2
    bobenemies 0.15.2
    bobgreenhouse 0.15.2
    bobinserters 0.15.1
    boblibrary 0.15.8
    boblogistics 0.15.6
    bobmining 0.15.2
    bobmodules 0.15.3
    bobores 0.15.6
    bobplates 0.15.11
    bobpower 0.15.3
    bobrevamp 0.15.4
    bobtech 0.15.3
    bobvehicleequipment 0.15.2
    bobwarfare 0.15.3
    clock 0.15.0
Anyone else having this issue? I'm not beneath just running some command to "cheat" and allow the rocket silo at this point...
Last edited by hackers238 on Mon Jun 19, 2017 5:30 pm, edited 1 time in total.
TheSAguy
Smart Inserter
Smart Inserter
Posts: 1449
Joined: Mon Jan 13, 2014 6:17 pm
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by TheSAguy »

This is probably a dumb question, but how do I barrel and empty Heavy and Light oil?
I have researched Fluid Handling and have a Compressor, but I don't see the recipe using the Compressor or Chemical Plant.

EDIT:
I just Enabled all research and still don't see it.
Thanks.
orzelek
Smart Inserter
Smart Inserter
Posts: 3924
Joined: Fri Apr 03, 2015 10:20 am
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by orzelek »

You need to use pump not compressor.
TheSAguy
Smart Inserter
Smart Inserter
Posts: 1449
Joined: Mon Jan 13, 2014 6:17 pm
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by TheSAguy »

orzelek wrote:You need to use pump not compressor.
Duh, I was looking at the pump, but there were two and I missed the other one.
Got it now.
Thanks!!
TzwenxD
Burner Inserter
Burner Inserter
Posts: 9
Joined: Sun Sep 18, 2016 1:49 pm
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by TzwenxD »

hey there!
first of all, thanks for your mods,they are part of my new addiction for factorio :)

Im currently playing a bobs/angels + (pretty much abplus from arumba/steejo) game and did just settings in the starting options.
I noticed that, in the tech tree, there is no connection from angels petrochem plastic, to bobs Advanced circuits. this was pretty confusing because the vanilla plastic research just unlocks bobs plastic pipes and synthetic wood. helmod helped me out

i'm not sure if this could be managed in the mod setting/ lua options, and its kind of a minor aesthetical thing, but i still wanted to tell you about it.
User avatar
bobingabout
Smart Inserter
Smart Inserter
Posts: 7352
Joined: Fri May 09, 2014 1:01 pm
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by bobingabout »

TzwenxD wrote:hey there!
first of all, thanks for your mods,they are part of my new addiction for factorio :)

Im currently playing a bobs/angels + (pretty much abplus from arumba/steejo) game and did just settings in the starting options.
I noticed that, in the tech tree, there is no connection from angels petrochem plastic, to bobs Advanced circuits. this was pretty confusing because the vanilla plastic research just unlocks bobs plastic pipes and synthetic wood. helmod helped me out

i'm not sure if this could be managed in the mod setting/ lua options, and its kind of a minor aesthetical thing, but i still wanted to tell you about it.
I'm not trying to pass off the work to angel here but... I am going to do that.
Basically, Angels mod actively edits things in my mod, in same cases completely rewriting the tech tree, so I'm afraid this is probably one of those things that falls into that category.
Creator of Bob's mods. Expanding your gameplay since version 0.9.8.
I also have a Patreon.
MisterFister
Fast Inserter
Fast Inserter
Posts: 104
Joined: Tue Jun 27, 2017 1:12 am
Contact:

Re: [0.15.x] Bob's Mods: General Discussion

Post by MisterFister »

Hello there, new to Factorio modding, experienced with modding other games.

Where do I go for some fort of "table of contents" with an actual useful description of what each individual mod does and how it affects gameplay? So far all I'm keenly understanding is that it introduces new types of ore into the game, but no solid idea of the other stuff or how the new ores would affect gameplay.

I get that there's a centralized library that is used by other modlets in the same suite, but no itemized description of what each modlet does in isolation from the others so that I can consider installing some without installing the whole thing.

All I can find now is a version history with update notes and base-game version migrations, which is useful, but not the info I'm seeking at this point.

Thanks!
Post Reply

Return to “Bob's mods”