FFF-381 That's where they explain the basics of space travel in game.hecktarzuli wrote: βFri Sep 13, 2024 3:35 pm"in Space Age Enriched Uranium is needed for space science" -- oh! Where did you see this, I'd like to learn more.Terrahertz wrote: βFri Sep 13, 2024 3:02 pmFor once, it's a nice puzzle to solve and that's part of the game.hecktarzuli wrote: βFri Sep 13, 2024 2:55 pmI don't get the point of circuits in nuclear reactors. Uranium is plentiful, I didn't even go through 1/2 a mine in my 5k megabase, what would be the point of throttling nuclear power if resources are so abundant with koverex?
The other part is, that in Space Age Enriched Uranium is needed for space science, so I don't know how quickly you now burn through ore patches.
Also you might have reactors on other planets where you need to import the fuel, so not using any cells when you don't need them saves you logistic costs.
Friday Facts #428 - Reactor & Logistics circuit control
-
- Fast Inserter
- Posts: 128
- Joined: Mon May 15, 2017 7:49 pm
- Contact:
Re: Friday Facts #428 - Reactor & Logistics circuit control
Re: Friday Facts #428 - Reactor & Logistics circuit control
Yeah if that's the case it ain't worth the hassle then tbh. If heat battery was possible without the need for steam battery then sure it'd as good, but if you have to account for both heat and steam then I'll just stick to a setup that only uses steam as a condition.Terrahertz wrote: βFri Sep 13, 2024 3:30 pmIf the numbers in the wiki are correct I highly doubt that it's the case. A Nuclear Reactor can store up to 5GJ of heat energy, the fuel cell has 8GJ of energy, multipled with the neighbour bonus, so in a 2x2 setup it has 24GJ. Heat exchangers and heat pipes have 1/10 of the heat capacity of the reactor per entity. So to be lossless you need A LOT of those, if you want to steer the thing entirely by the heat signal at least.
But as I said if you calculate the thermal capacity of your powerplant you can now have either less steam storage or you can better account for the powerplant heating up.
-
- Fast Inserter
- Posts: 128
- Joined: Mon May 15, 2017 7:49 pm
- Contact:
Re: Friday Facts #428 - Reactor & Logistics circuit control
You might find this usefull, heat pipes are twice as space efficient as steam storage IF you can use their full range of 500-1000Β°c, which might not be the case.JigSaW wrote: βFri Sep 13, 2024 3:57 pmYeah if that's the case it ain't worth the hassle then tbh. If heat battery was possible without the need for steam battery then sure it'd as good, but if you have to account for both heat and steam then I'll just stick to a setup that only uses steam as a condition.Terrahertz wrote: βFri Sep 13, 2024 3:30 pmIf the numbers in the wiki are correct I highly doubt that it's the case. A Nuclear Reactor can store up to 5GJ of heat energy, the fuel cell has 8GJ of energy, multipled with the neighbour bonus, so in a 2x2 setup it has 24GJ. Heat exchangers and heat pipes have 1/10 of the heat capacity of the reactor per entity. So to be lossless you need A LOT of those, if you want to steer the thing entirely by the heat signal at least.
But as I said if you calculate the thermal capacity of your powerplant you can now have either less steam storage or you can better account for the powerplant heating up.
Just so we have a complete picture now
Re: Friday Facts #428 - Reactor & Logistics circuit control
Before counting many funny mods possibilities (like Hauler from AAI, or Caravan from Pyanodon), you have other vanilla options to deliver ammo for a section of your perimeter defenses. You could use a single (or a few) requester chests plus some inserters to feed a short belt. Or you could try different options, like the fun from trains instead of bots. Even you could try something like this to avoid even electricity (you can send better ammo later when you can produce it, as well as better fuel like solid fuel).JackTheSpades wrote: βFri Sep 13, 2024 1:37 pmBut gun turrets either require a requester chest each or a large belt with some fancy circuit conditions if you want to avoid just having a full belt of "backup" amo... and of course they require electricity too, for the inserters.
Re: Friday Facts #428 - Reactor & Logistics circuit control
very, very exciting!!!
Re: Friday Facts #428 - Reactor & Logistics circuit control
Disabled chests had better not be included in logistics totals. It's already terrible that buffers are counted in totals, and ruins all my logic. If disabled chests are counted, they will interfere with circuits trying to count how many items need to be made.
I like to use buffer chests for construction. This could replace the desire for ghost-reading if it was better.
The option to tell a buffer chest not to supply, only request, is helpful. I hope this works. I currently use a requester chest, and fast-replace it with a buffer when I want it to build. Being able to configure the buffer chest for both tasks, without replacing the item, is convenient. I still need script to count blueprints, and to configure matching chests & combinators. (I can't configure the chests from the combinators, because then I wouldn't be able to read them.)
I like to use buffer chests for construction. This could replace the desire for ghost-reading if it was better.
The option to tell a buffer chest not to supply, only request, is helpful. I hope this works. I currently use a requester chest, and fast-replace it with a buffer when I want it to build. Being able to configure the buffer chest for both tasks, without replacing the item, is convenient. I still need script to count blueprints, and to configure matching chests & combinators. (I can't configure the chests from the combinators, because then I wouldn't be able to read them.)
Re: Friday Facts #428 - Reactor & Logistics circuit control
This is all completely ignoring the fact that the steam storage is a very small fraction of the total footprint of a large nuclear power plant.Terrahertz wrote: βFri Sep 13, 2024 4:12 pmYou might find this usefull, heat pipes are twice as space efficient as steam storage IF you can use their full range of 500-1000Β°c, which might not be the case.JigSaW wrote: βFri Sep 13, 2024 3:57 pmYeah if that's the case it ain't worth the hassle then tbh. If heat battery was possible without the need for steam battery then sure it'd as good, but if you have to account for both heat and steam then I'll just stick to a setup that only uses steam as a condition.Terrahertz wrote: βFri Sep 13, 2024 3:30 pmIf the numbers in the wiki are correct I highly doubt that it's the case. A Nuclear Reactor can store up to 5GJ of heat energy, the fuel cell has 8GJ of energy, multipled with the neighbour bonus, so in a 2x2 setup it has 24GJ. Heat exchangers and heat pipes have 1/10 of the heat capacity of the reactor per entity. So to be lossless you need A LOT of those, if you want to steer the thing entirely by the heat signal at least.
But as I said if you calculate the thermal capacity of your powerplant you can now have either less steam storage or you can better account for the powerplant heating up.
Just so we have a complete picture now
Take a 1 GW setup for example. The steam tanks to store all the output make up maybe 10% of the total space needed. The heat exchangers and turbines needed to produce 1 GW of power far outsize the steam storage.
IMO it's still going to be easier to keep triggering off steam levels for large reactors. Being able to trigger off the stored heat is likely only useful for really small setups, like 1 or 2 reactors, where you care more about footprint than total output. Basically space platforms, which benefit from not wasting fuel cells since it's harder to resupply them.
The subtle thing I think people missed was the hint about how this would matter for the last planet. I'm taking that to mean there will be some incentive to ensure the reactor's heat stays within a specific range. Right now the only reason you'd care is if you have a reactor over 900 C that gets destroyed, since it turns into a nuke, but that's pretty trivial to avoid in 1.0. Now I'm wondering if there's something about the mechanics of the last planet that will make this much more of a danger in 2.0.
Re: Friday Facts #428 - Reactor & Logistics circuit control
damn that last comment about the release date got we worried. I already booked 1 week vacation for the release week
-
- Inserter
- Posts: 20
- Joined: Mon Feb 14, 2022 5:49 pm
- Contact:
Re: Friday Facts #428 - Reactor & Logistics circuit control
That is an amazing update! I can't wait until the 21st!
-
- Inserter
- Posts: 20
- Joined: Mon Feb 14, 2022 5:49 pm
- Contact:
Re: Friday Facts #428 - Reactor & Logistics circuit control
I forgot: Will there be permanent signals for generated and stored power on all power networks? That would be fantastic, as, whenever there are brownouts, different parts of your base could automatically shut themselves down in a priority sequence to keep the most important parts running at all times.
Also, when placing a power pole, could you *PLEASE* automatically re-comb adjacent power poles to minimize the number of connections? It is irritating when you place one and nothing connects to it because the other poles in its range already have (multiple!) redundant connections.
Cheers!
Also, when placing a power pole, could you *PLEASE* automatically re-comb adjacent power poles to minimize the number of connections? It is irritating when you place one and nothing connects to it because the other poles in its range already have (multiple!) redundant connections.
Cheers!
-
- Inserter
- Posts: 21
- Joined: Fri Apr 26, 2024 12:57 pm
- Contact:
Re: Friday Facts #428 - Reactor & Logistics circuit control
I think in this case they cut to the chase and removed that limit entirely.KeithFromCanada wrote: βFri Sep 13, 2024 6:46 pmAlso, when placing a power pole, could you *PLEASE* automatically re-comb adjacent power poles to minimize the number of connections? It is irritating when you place one and nothing connects to it because the other poles in its range already have (multiple!) redundant connections.
That said, as someone who has mined and replaced power poles many times so they make a nice square grid of connections, I'd be 100% down for any improvements in that logic. At least now there won't be a resource requirement if you need to break out the manual adjustments.
-
- Inserter
- Posts: 20
- Joined: Mon Feb 14, 2022 5:49 pm
- Contact:
Re: Friday Facts #428 - Reactor & Logistics circuit control
FWIW, the only circuitry needed is a string of connected belts with the first set to 'enable if everything = 0' and the rest to 'read/hold'--I use six for a long pause in between pairs of ammo. I load/unload the belts from/to a chest that has a speaker hooked up to it to warn me when ammo is getting low. (I disable the first belt's condition at first so a full belt of ammo is sent until all of the turrets are full, then turn it back on.) You have a choice of either doubling the belt to bring ammo back or using logibots. (If you *REALLY* want to be safe, you can also add coal/etc. to the belt and then use burner inserters, so you can be sure that your defences will keep running even if you lose power.)JackTheSpades wrote: βFri Sep 13, 2024 1:37 pmSince we have a lot of logistic changes, are there any chances of seeing logistic gun turrets?
The main reason why gun turrets fall of in late/post game to me is that supplying them becomes an unjustifiable hassle. Flame throwers just requires pipes and are well worth it. Laser turrets just electricity which is also simple enough
But gun turrets either require a requester chest each or a large belt with some fancy circuit conditions if you want to avoid just having a full belt of "backup" amo... and of course they require electricity too, for the inserters. Which is why they get replaced by laser turrets.
I hope this helps.
Re: Friday Facts #428 - Reactor & Logistics circuit control
Would shutting power down based on the charge of an accumulator solve it for you?KeithFromCanada wrote: βFri Sep 13, 2024 6:46 pmI forgot: Will there be permanent signals for generated and stored power on all power networks? That would be fantastic, as, whenever there are brownouts, different parts of your base could automatically shut themselves down in a priority sequence to keep the most important parts running at all times.
Like, if the charge is less than 30, shut down factory A, if it's less than 20 shut down B, etc.
Re: Friday Facts #428 - Reactor & Logistics circuit control
The ability to manufacture items in order to fill ghost requests could be really cool. I hope the devs are able to find a way to implement it without impacting performance.
Re: Friday Facts #428 - Reactor & Logistics circuit control
All you need to auto-craft missing building requests is a row of buffer chests that request at least 1 of everything. If that item gets used by a construction bot, then it will show up as a logistic request.
My mods: Multiple Unit Train Control, Smart Artillery Wagons
Maintainer of Vehicle Wagon 2, Cargo Ships, Honk
Maintainer of Vehicle Wagon 2, Cargo Ships, Honk
- GregoriusT
- Filter Inserter
- Posts: 311
- Joined: Wed Apr 10, 2019 6:42 pm
- Contact:
Re: Friday Facts #428 - Reactor & Logistics circuit control
Just to let you know, the Accumulator thing is not as reliable as you might think, you can end up with total blackouts due to the charge rate of the Accumulator sometimes not reacting fast enough. (especially if you dont build enough Accumulators, or no Accumulators at all)Muche wrote: βFri Sep 13, 2024 7:16 pmWould shutting power down based on the charge of an accumulator solve it for you?KeithFromCanada wrote: βFri Sep 13, 2024 6:46 pmI forgot: Will there be permanent signals for generated and stored power on all power networks? That would be fantastic, as, whenever there are brownouts, different parts of your base could automatically shut themselves down in a priority sequence to keep the most important parts running at all times.
Like, if the charge is less than 30, shut down factory A, if it's less than 20 shut down B, etc.
Don't underestimate Landmines!
Biters bite, Spitters spit, Spawners spawn and Worms... worm? - No, they throw their vomit! They even wind up to directly hurl it at you! friggin Hurlers...
Biters bite, Spitters spit, Spawners spawn and Worms... worm? - No, they throw their vomit! They even wind up to directly hurl it at you! friggin Hurlers...
-
- Burner Inserter
- Posts: 14
- Joined: Fri Oct 13, 2023 11:24 am
- Contact:
Re: Friday Facts #428 - Reactor & Logistics circuit control
Pretty much my experience with nuclear. Maybe other people set uranium to spawn very infrequently but I tend to build over patches since I just don't need it. It could be fun to experiment a bit with circuits and reactors but most probably I'll overbuild fuel cell production and never look at the reactor again.hecktarzuli wrote: βFri Sep 13, 2024 2:55 pmI don't get the point of circuits in nuclear reactors. Uranium is plentiful, I didn't even go through 1/2 a mine in my 5k megabase, what would be the point of throttling nuclear power if resources are so abundant with koverex?
Re: Friday Facts #428 - Reactor & Logistics circuit control
Will there be some easy way to get bots out of the system for upgrades?
Many mods have multiple tiers of construction and logistics bots, and upgrading them is a huge headache.
Many mods have multiple tiers of construction and logistics bots, and upgrading them is a huge headache.
-
- Long Handed Inserter
- Posts: 78
- Joined: Sun Feb 25, 2024 10:23 am
- Contact:
Re: Friday Facts #428 - Reactor & Logistics circuit control
Roboports will be able to set min/max requests for specific robots inside them. That way you can make one roboport request all lower tier bots into itself, where they can be removed from the network by inserters.
Funnily enough, they already used this exact example when introducing it.
Re: Friday Facts #428 - Reactor & Logistics circuit control
JigSaW is right, but Loewchen is spreading misleading information.Loewchen wrote: βFri Sep 13, 2024 2:01 pmEven if your do not consume any power from the setup, the reactors will not reach maximum temperature when fuel is inserted at 500Β°C and you have anything connected to it (8 heat pipes alone are enough). You can have all the steam capacity you want but reading the steam value is unnecessary and it will be lossless no matter what.
Please check my Perfect Cloverleaf Power plant, it includes all documentation, include thermal capacity table.
This perfect powerplant is always ready to supply MAX or ZERO power while it is always loose-less and wasteless.
viewtopic.php?f=208&t=96233