pY Raw Ores Discussion

pyanodon's mods are here

Moderator: pyanodon

Post Reply
doppelpunktdrei
Manual Inserter
Manual Inserter
Posts: 1
Joined: Fri Dec 07, 2018 6:04 pm
Contact:

Re: pY Raw Ores Discussion

Post by doppelpunktdrei » Fri Dec 07, 2018 6:52 pm

cpy wrote:
Fri Dec 07, 2018 3:25 pm
I was telling everyone that bob mods made Pymods PISS EASY! Confirmed by pyanodon himself!
I even made production line comparisons and bobs line was 3x shorter and simpler.
I played Pyanodon's mods with and without Bob's mods. At the moment Bob's mods add a lot of complexity to the Py-suite. It seems that this will no longer the case then Raw Ores is ready, but at this point in time the Pymods are more complex with Bob's mods and I think kingarthur pointed this out to you in the past.

User avatar
cpy
Filter Inserter
Filter Inserter
Posts: 763
Joined: Thu Jul 31, 2014 5:34 am
Contact:

Re: pY Raw Ores Discussion

Post by cpy » Fri Dec 07, 2018 8:47 pm

And I proved him wrong. Since production lines for same things are 2-3x longer than py-bob combo. More complex too.
For me it felt like bob just made lot of things simpler.

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1470
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon » Sat Dec 08, 2018 7:44 pm

Good news...we might release an official working version of the whole pySuite today :D
pY Coal processing mod
Discord: Pyanodon #5791

IpsumEstPan
Burner Inserter
Burner Inserter
Posts: 15
Joined: Mon Sep 17, 2018 6:17 pm
Contact:

Re: pY Raw Ores Discussion

Post by IpsumEstPan » Sat Dec 08, 2018 9:08 pm

so anxious.

Mella
Fast Inserter
Fast Inserter
Posts: 114
Joined: Tue Nov 08, 2016 6:58 pm
Contact:

Re: pY Raw Ores Discussion

Post by Mella » Sat Dec 08, 2018 9:20 pm

pyanodon wrote:
Sat Dec 08, 2018 7:44 pm
Good news...we might release an official working version of the whole pySuite today :D
.................................. sitting with bated breath :o

IpsumEstPan
Burner Inserter
Burner Inserter
Posts: 15
Joined: Mon Sep 17, 2018 6:17 pm
Contact:

Re: pY Raw Ores Discussion

Post by IpsumEstPan » Sat Dec 08, 2018 11:29 pm

guess it's not happening today anymore

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1470
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon » Sat Dec 08, 2018 11:57 pm

After some months of hard work and amazing collaboration of my great friend, Nexela. The mod was released! Go there and grab a copy.

https://mods.factorio.com/mod/pyrawores

Dont run with Bobs. Running it with angels may cause bugs or incompatibilities. Merry Christmas!
pY Coal processing mod
Discord: Pyanodon #5791

minno
Inserter
Inserter
Posts: 46
Joined: Sat Apr 21, 2018 3:54 am
Contact:

Re: pY Raw Ores Discussion

Post by minno » Sun Dec 09, 2018 1:53 am

PyRO prevents crafting the recipe "processing-unit" (Circuit board 3) because it adds 2 ingredients. That brings the ingredient count from 9 to 11, and the chipshooter machine has a 10-ingredient limit.

Ingredients are added in pyrawores_1.0.1/data-updates.lua, lines 30 and 48. The ingredient limit is in pyhightech_1.0.10/prototypes/buildings/chipshooter.lua, line 55.

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1470
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon » Sun Dec 09, 2018 2:12 am

minno wrote:
Sun Dec 09, 2018 1:53 am
PyRO prevents crafting the recipe "processing-unit" (Circuit board 3) because it adds 2 ingredients. That brings the ingredient count from 9 to 11, and the chipshooter machine has a 10-ingredient limit.

Ingredients are added in pyrawores_1.0.1/data-updates.lua, lines 30 and 48. The ingredient limit is in pyhightech_1.0.10/prototypes/buildings/chipshooter.lua, line 55.
Thanks..it will be fixed.
pY Coal processing mod
Discord: Pyanodon #5791

nagapito
Filter Inserter
Filter Inserter
Posts: 336
Joined: Fri Jul 29, 2016 12:18 am
Contact:

Re: pY Raw Ores Discussion

Post by nagapito » Sun Dec 09, 2018 2:23 am

PyRO needs last version of PyCoal to run but the official requirement is 1.0.6.
You should change the required version before someone starts complaining it doesnt work...

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1470
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon » Sun Dec 09, 2018 2:28 am

nagapito wrote:
Sun Dec 09, 2018 2:23 am
PyRO needs last version of PyCoal to run but the official requirement is 1.0.6.
You should change the required version before someone starts complaining it doesnt work...
Good point.
pY Coal processing mod
Discord: Pyanodon #5791

nagapito
Filter Inserter
Filter Inserter
Posts: 336
Joined: Fri Jul 29, 2016 12:18 am
Contact:

Re: pY Raw Ores Discussion

Post by nagapito » Sun Dec 09, 2018 2:32 am

pyanodon wrote:
Sat Dec 08, 2018 11:57 pm
Dont run with Bobs. Running it with angels may cause bugs or incompatibilities. Merry Christmas!
Would be interesting if, isntead of checking for boblibrary mod, you actually checked for his individual mods and applied the changes required for each mod.

This way, we could replace bob plates and bob ores with PyRO and still have almost all Bob Suit with is advanced items while playing with the full Py suit mods

WispyFX
Manual Inserter
Manual Inserter
Posts: 2
Joined: Sat Feb 10, 2018 9:25 pm
Contact:

Re: pY Raw Ores Discussion

Post by WispyFX » Sun Dec 09, 2018 2:40 am

I downloaded the full suite including the raw ores, and the pycoal module didnt load due to not registering bauxite? bauxite-mining-recipe

npuldon
Fast Inserter
Fast Inserter
Posts: 128
Joined: Thu Dec 08, 2016 8:36 am
Contact:

Re: pY Raw Ores Discussion

Post by npuldon » Sun Dec 09, 2018 3:26 am

Py, what should be the starting resources for RSO when you the Raw Ores mod? Same as PyHighTech and Coal Processing or something else?

minno
Inserter
Inserter
Posts: 46
Joined: Sat Apr 21, 2018 3:54 am
Contact:

Re: pY Raw Ores Discussion

Post by minno » Sun Dec 09, 2018 4:09 am

Another recipe that doesn't have any buildings that can make it: Titanium Pulp 02, near the bottom of the Py Raw Ores section. I think it's because it has 2 fluid outputs but the grease table only has 1 fluid output.

User avatar
Raphaello
Long Handed Inserter
Long Handed Inserter
Posts: 56
Joined: Fri Apr 21, 2017 7:04 pm
Contact:

Re: pY Raw Ores Discussion

Post by Raphaello » Sun Dec 09, 2018 8:27 am

Congrats on the release!!! Thanks a lot for all the hard work to both of you :!:

small note: pyIndustry has optional dependency on bobs library. I guess this is no longer needed and can be removed.

EDIT: I have all the classic ores (iron, copper, stone, coal, uranium, lead, nickel, titatnium,etc) available on screen when starting new game with pyMods. I though that only your new ores would be generated but maybe I was wrong.

Also, starting area is very inconsistent - getting a start with water, iron, coal, copper, tin and lead (I assume these are basics) requires re-rolling. Getting consistent starting is a must for new players of the mods - I would not want to run between resources too much.
Last edited by Raphaello on Sun Dec 09, 2018 8:46 am, edited 1 time in total.

Mella
Fast Inserter
Fast Inserter
Posts: 114
Joined: Tue Nov 08, 2016 6:58 pm
Contact:

Re: pY Raw Ores Discussion

Post by Mella » Sun Dec 09, 2018 8:46 am

Set of mods https://yadi.sk/i/Sqebzz34vlNBbA
Error when launch with bob's mods https://yadi.sk/i/gzv3S58FruEYlQ
I tried to toggle off only bob's ores but error still appears

kingarthur
Filter Inserter
Filter Inserter
Posts: 703
Joined: Sun Jun 15, 2014 11:39 am
Contact:

Re: pY Raw Ores Discussion

Post by kingarthur » Sun Dec 09, 2018 8:55 am

Mella wrote:
Sun Dec 09, 2018 8:46 am
Set of mods https://yadi.sk/i/Sqebzz34vlNBbA
Error when launch with bob's mods https://yadi.sk/i/gzv3S58FruEYlQ
I tried to toggle off only bob's ores but error still appears
doesn't work with bobs right now. im working on the compatibility but its not done yet. compatibility still needs updated to account for all of the new changes.

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1470
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon » Sun Dec 09, 2018 9:32 am

nagapito wrote:
Sun Dec 09, 2018 2:32 am
pyanodon wrote:
Sat Dec 08, 2018 11:57 pm
Dont run with Bobs. Running it with angels may cause bugs or incompatibilities. Merry Christmas!
Would be interesting if, isntead of checking for boblibrary mod, you actually checked for his individual mods and applied the changes required for each mod.

This way, we could replace bob plates and bob ores with PyRO and still have almost all Bob Suit with is advanced items while playing with the full Py suit mods

yeah..but we wont do that. waay too much work to keep updated with any change bobs may do and adapt more than 1k recipes with all pymods together. Also, retundancy...bobs have his own chains and have two or more chains for the same ore will only make the whole pyRO concept useless.
pY Coal processing mod
Discord: Pyanodon #5791

User avatar
pyanodon
Smart Inserter
Smart Inserter
Posts: 1470
Joined: Wed Apr 20, 2016 4:42 pm
Contact:

Re: pY Raw Ores Discussion

Post by pyanodon » Sun Dec 09, 2018 9:33 am

Mella wrote:
Sun Dec 09, 2018 8:46 am
Set of mods https://yadi.sk/i/Sqebzz34vlNBbA
Error when launch with bob's mods https://yadi.sk/i/gzv3S58FruEYlQ
I tried to toggle off only bob's ores but error still appears
Reading is for the weaks!!! hahahhah We are saying it wont be compatible with bobs since...the start.
pY Coal processing mod
Discord: Pyanodon #5791

Post Reply

Return to “PyMods”

Who is online

Users browsing this forum: No registered users and 2 guests