Belt Input Equalizer

Circuit-free solutions of basic factory-design to achieve optimal item-throughput.
Involving: Belts (balancers, crossings), Inserters, Chests, Furnaces, Assembling Devices ...
Optimized production chains. Compact design.
Please provide blueprints!
Forum rules
Circuit-free solutions of basic factory-design to achieve optimal item-throughput
Post Reply
willmax
Manual Inserter
Manual Inserter
Posts: 4
Joined: Tue Apr 28, 2020 3:28 am
Contact:

Belt Input Equalizer

Post by willmax »

Image

So this is a belt and splitter setup that draws materials input equally regardless of the output.
The layout is simple, just out an extra splitter after a normal lane balancer and set the outlet priority of that splitter into the main line.
Then connect the other outlet of that splitter to the other input of the first splitter with belt.

Any thoughts and opinions would be apreciated.

mmmPI
Smart Inserter
Smart Inserter
Posts: 3160
Joined: Mon Jun 20, 2016 6:10 pm
Contact:

Re: Belt Input Equalizer

Post by mmmPI »

When i see this i expected the left side of the input belt (from the belt point of view looking at the flow going away) to stutter.

It took me quite some time to realise that some of the input is switch from the left side of the belt to the right side of the belt when sideloading before the second splitter.

I'm still unable to explain/understand why there is seemingly 1.5 belt flow going in the first splitter, and only 1 belt flow between the 2 splitters, while the input doesn't stutter.

thanks you just made me curious about what it would look if instead of 2 iron lane it would be 1iron and 1 coal on the input belt, i will try that because my brain tells me my eyes are not seeing it right on the picture :)

User avatar
disentius
Filter Inserter
Filter Inserter
Posts: 694
Joined: Fri May 12, 2017 3:17 pm
Contact:

Re: Belt Input Equalizer

Post by disentius »

Aha, hadn't seen that one before. Nice!

Here are some other versions, i picked up over time on these forums en reddit.
1-1 lanebalancer variations.gif
1-1 lanebalancer variations.gif (2.89 MiB) Viewed 11911 times
(settings for the top one:)
- left belt -> enable if everything < 4
- right belt -> read belt contents - hold

You can find a lot of info about balancers via the Wiki:
https://wiki.factorio.com/Balancer_mechanics

willmax
Manual Inserter
Manual Inserter
Posts: 4
Joined: Tue Apr 28, 2020 3:28 am
Contact:

Re: Belt Input Equalizer

Post by willmax »

disentius wrote:
Tue Apr 28, 2020 10:48 am
Aha, hadn't seen that one before. Nice!

Here are some other versions, i picked up over time on these forums en reddit.

1-1 lanebalancer variations.gif

(settings for the top one:)
- left belt -> enable if everything < 4
- right belt -> read belt contents - hold

You can find a lot of info about balancers via the Wiki:
https://wiki.factorio.com/Balancer_mechanics
Hi there, i have looked into many lane balancers but my setup above is just suit me well since it requires no underground and more space efficient to me.

Trebor
Filter Inserter
Filter Inserter
Posts: 288
Joined: Sun Apr 30, 2017 1:39 pm
Contact:

Re: Belt Input Equalizer

Post by Trebor »

This also discusses lane balances:
viewtopic.php?f=202&t=74911

Modran
Manual Inserter
Manual Inserter
Posts: 4
Joined: Mon Aug 03, 2020 1:00 pm
Contact:

Re: Belt Input Equalizer

Post by Modran »

willmax wrote:
Tue Apr 28, 2020 5:20 pm
Hi there, i have looked into many lane balancers but my setup above is just suit me well since it requires no underground and more space efficient to me.

I tried it and it doesn't seem to be completely balanced. For me it takes twice as many parts from the jammed side than from the free one (which is odd because I thought you couldn't get a 2/3 ratio).

(By the way: the additional belts are more expensive than the two or even three saved undergroundies.)
Factorio_Lane_Balancer.jpg
Factorio_Lane_Balancer.jpg (376.76 KiB) Viewed 11359 times

User avatar
TopSpeedKertus
Manual Inserter
Manual Inserter
Posts: 1
Joined: Wed Nov 25, 2020 3:41 am
Contact:

Re: Belt Input Equalizer

Post by TopSpeedKertus »

I hadn't paid much attention to this issue until seeing this thread. Here's a design I came up with that insures both sides of the input belt are being consumed equally. Can't wait for 1.1 so I don't have to manually create reversed version of my blueprints.

Image

Image


User avatar
ssilk
Global Moderator
Global Moderator
Posts: 12888
Joined: Tue Apr 16, 2013 10:35 pm
Contact:

Re: Belt Input Equalizer

Post by ssilk »

But that mixes just one lane. Not both. You see that clearly on the last pic, where only the upper belt is mixed.
Cool suggestion: Eatable MOUSE-pointers.
Have you used the Advanced Search today?
Need help, question? FAQ - Wiki - Forum help
I still like small signatures...

User avatar
NotRexButCaesar
Smart Inserter
Smart Inserter
Posts: 1124
Joined: Sun Feb 16, 2020 12:47 am
Contact:

Re: Belt Input Equalizer

Post by NotRexButCaesar »

disentius wrote:
Tue Apr 28, 2020 10:48 am
Aha, hadn't seen that one before. Nice!

Here are some other versions, i picked up over time on these forums en reddit.

1-1 lanebalancer variations.gif

(settings for the top one:)
- left belt -> enable if everything < 4
- right belt -> read belt contents - hold

You can find a lot of info about balancers via the Wiki:
https://wiki.factorio.com/Balancer_mechanics
What is that one at the top?
—Crevez, chiens, si vous n'étes pas contents!

User avatar
disentius
Filter Inserter
Filter Inserter
Posts: 694
Joined: Fri May 12, 2017 3:17 pm
Contact:

Re: Belt Input Equalizer

Post by disentius »

using the circuit network capabilities of belts to drop items two at the time on one side of the belt.

Trebor
Filter Inserter
Filter Inserter
Posts: 288
Joined: Sun Apr 30, 2017 1:39 pm
Contact:

Re: Belt Input Equalizer

Post by Trebor »

ssilk wrote:
Mon Dec 21, 2020 5:09 am
But that mixes just one lane. Not both. You see that clearly on the last pic, where only the upper belt is mixed.
The bottom lane is not mixed because the upper lane fills the output belt before it has a chance to be consumed.

User avatar
disentius
Filter Inserter
Filter Inserter
Posts: 694
Joined: Fri May 12, 2017 3:17 pm
Contact:

Re: Belt Input Equalizer

Post by disentius »

nope.
Attachments
2021-05-11 16_47_17-Window.png
2021-05-11 16_47_17-Window.png (627.89 KiB) Viewed 7688 times

Trebor
Filter Inserter
Filter Inserter
Posts: 288
Joined: Sun Apr 30, 2017 1:39 pm
Contact:

Re: Belt Input Equalizer

Post by Trebor »

I misspoke, I should have said the bottom lane not mixing is not a problem because the upper lane fills the output belt.

This design works as long as the input belts are compressed and the input and output are the same speed.

User avatar
disentius
Filter Inserter
Filter Inserter
Posts: 694
Joined: Fri May 12, 2017 3:17 pm
Contact:

Re: Belt Input Equalizer

Post by disentius »

agreed :)

Post Reply

Return to “Mechanical Throughput Magic (circuit-free)”