If you examine the player's cursor_stack every few ticks, you could do it, sure. I like that idea.Boogieman14 wrote:I had a thought on this 'add' mode. Would it be possible to detect when you release the item from the cursor and complete the deposit at that moment?Narc wrote:Very much agreed on the ability to put an ore site back into "add" mode (which would also give an opportunity to reduce its duration -- 10 seconds is a long time to wait, and the only way to bypass the wait is to have another kind of ore handy).
[MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7.17
Re: [MOD 0.12.9+] YARM (Yet Another Resource Monitor) v0.6.23
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 7)
Translations into Russian. I'm sorry if there are errors.
- Attachments
-
- ru.zip
- (2.25 KiB) Downloaded 262 times
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
Very nice, thank you!RikkiLook wrote:Translations into Russian. I'm sorry if there are errors.
That reminded me, it was about time to cut a new release, so here's YARM v0.7.12 (direct download). Together with the new Russian locale, we also have a remote interface for other mods to switch the expansion of the YARM site list. Currently, it's as simple as:
Code: Select all
previous_state = remote.call("YARM", "show_expando", player_index)
previous_state = remote.call("YARM", "hide_expando", player_index)
-- You are also free to use a player name instead of the index
-
- Long Handed Inserter
- Posts: 64
- Joined: Wed Sep 16, 2015 7:14 pm
- Contact:
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
This mod has made my life so much easier.. no longer do i need to run out to various outposts to check the remaining volume to bring back to my base...
But i have 1 issue i hope you can help with... can you add a way to change the color's used.. I have issues with various colors clashing.. I am color blind and only see 4 primary colors... being able to select different colors for coal,iron,stone,copper and anything else added would be a great benefit to me as i sometimes struggle with the current colors and background colors..
Thank you
But i have 1 issue i hope you can help with... can you add a way to change the color's used.. I have issues with various colors clashing.. I am color blind and only see 4 primary colors... being able to select different colors for coal,iron,stone,copper and anything else added would be a great benefit to me as i sometimes struggle with the current colors and background colors..
Thank you
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
Yes, I think, but it won't be a very pretty interface (just text boxes to type either values between 0 and 1, or 2-255). If I understand correctly, you would also want to be able to restrict the current automatic gradient to just the key colors (i.e., show the "good" color constantly until reaching the "warning" color level, then show only that until the "depleted" color level).Anomoly2012 wrote:[...]can you add a way to change the color's used[?]
I think this sounds like an excellent first thing to put into a settings interface. I have recorded it in the future plans. No promises on timing, sorry.
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
I've now actually used the mod a little bit, and it's very verbose in its output. I think I'd prefer a version that simply maintains a list of the name of each patch (iron_01, iron_02, copper_01) followed by a percentage relative to original (when the mod's gadget was first used on the path) amount (e.g. iron_01 40%, iron_02 97%).
Is there a way to get it to do that? The mod by default puts a lot of text onto my screen, and has relatively few config buttons, and they don't work too intuitively.
Is there a way to get it to do that? The mod by default puts a lot of text onto my screen, and has relatively few config buttons, and they don't work too intuitively.
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
Future plans do include the ability to choose what columns are visible. I'm none too pleased with how wide it is, either.Peter34 wrote:I've now actually used the mod a little bit, and it's very verbose in its output.[...]
That said, I haven't played Factorio in a while; I make no promises as to timing of updates. Which is the primary reason I've made the mods open source -- I will (and have!) gladly accepted patches.
-
- Long Handed Inserter
- Posts: 64
- Joined: Wed Sep 16, 2015 7:14 pm
- Contact:
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
Does not need to be pretty... just functional... =) I will await your update... when its ready its ready... until then i will do what i have been doing... ask my girl what the words say.. ROFLMAONarc wrote:Yes, I think, but it won't be a very pretty interface (just text boxes to type either values between 0 and 1, or 2-255). If I understand correctly, you would also want to be able to restrict the current automatic gradient to just the key colors (i.e., show the "good" color constantly until reaching the "warning" color level, then show only that until the "depleted" color level).Anomoly2012 wrote:[...]can you add a way to change the color's used[?]
I think this sounds like an excellent first thing to put into a settings interface. I have recorded it in the future plans. No promises on timing, sorry.
I do love this mod... when you have more than 10+ outposts going it makes it so much less of a hastle to check on them...
Thanks.
- Cyber_Garret
- Burner Inserter
- Posts: 14
- Joined: Sat Jan 31, 2015 10:51 pm
- Contact:
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
Great mod! Very helpful.
Narc please PM me i create some new graphic icon and bonus images for you mod, if you like new design i send you images.
Technology icon:
http://imgur.com/n7AmuGL
Resource monitor icon:
http://imgur.com/kkXhg38
Narc please PM me i create some new graphic icon and bonus images for you mod, if you like new design i send you images.
Technology icon:
http://imgur.com/n7AmuGL
Resource monitor icon:
http://imgur.com/kkXhg38
"What is locked, can be opened,
What is hidden, can be found,
What is yours, can be mine" (c) Garret
My English is very bad, sry.
What is hidden, can be found,
What is yours, can be mine" (c) Garret
My English is very bad, sry.
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
This mod is a must have, I really like it. One suggestion: when the list is not expanded, I only see those sites which are close to deplete. It would be cool if the list would also contains sites which still has plenty of resources, but the mining rate is low. Usually that indicates something wrong with the site, electric wires broke, trains stuck, anything.
- Cyber_Garret
- Burner Inserter
- Posts: 14
- Joined: Sat Jan 31, 2015 10:51 pm
- Contact:
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
Hi again Narc, i can't write PM I thinking about better icon for item "Resource Monitor" later i show you another version. If you need help with the icons\gfx that will be glad to help.
YARM-Graphic.zip
Include:
2 Picture for you forum theme
2 Icon for game
Revamped prototypes.lua for new icon
Images created by me from zero.
YARM-Graphic.zip
Include:
2 Picture for you forum theme
2 Icon for game
Revamped prototypes.lua for new icon
Images created by me from zero.
"What is locked, can be opened,
What is hidden, can be found,
What is yours, can be mine" (c) Garret
My English is very bad, sry.
What is hidden, can be found,
What is yours, can be mine" (c) Garret
My English is very bad, sry.
-
- Fast Inserter
- Posts: 124
- Joined: Fri May 22, 2015 3:31 pm
- Contact:
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
I added YARM to an existing game (12.17), and can't load a save created with YARM active. The previous save (no YARM) is fine, but the current one gets to end of the loading progress bar and hangs.
UPDATE: I left it sit, and after about five minutes, it finally loaded... any ideas why it takes so long?
No actual crash (have to kill the process), so the log isn't terribly informative:
UPDATE: I left it sit, and after about five minutes, it finally loaded... any ideas why it takes so long?
No actual crash (have to kill the process), so the log isn't terribly informative:
factorio-current
- Attachments
-
- 02-072.zip
- (17.26 MiB) Downloaded 265 times
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
Yes, the plans currently call for several configurable filters and better feedback through some kind of alert system. When I pick this up again, that'll be one of the first things I'll do.imajor wrote:This mod is a must have, I really like it. One suggestion: when the list is not expanded, I only see those sites which are close to deplete. It would be cool if the list would also contains sites which still has plenty of resources, but the mining rate is low. Usually that indicates something wrong with the site, electric wires broke, trains stuck, anything.
The more resource tiles (not sites, but actual in-world ore entities) you're tracking, the longer it'll take for Factorio to reload the save as it will need to re-establish the connection between the stored entity references and the ones existing in the world. There are some options I might try to mitigate this, but all it would do is shift the delay from load-time to later -- meaning you'd then have good reason complain that, for the first few minutes after loading a save, you get unpredictable lag spikes.SpeedDaemon wrote:I added YARM to an existing game (12.17), and can't load a save created with YARM active. The previous save (no YARM) is fine, but the current one gets to end of the loading progress bar and hangs.
UPDATE: I left it sit, and after about five minutes, it finally loaded... any ideas why it takes so long?[...]
The best workaround I can offer is to only keep sites you're actually mining, or are about to mine. Be wary of large-area ore patches (the bigger they are, the more impact they have). If using endless resources, remove sites that have reached minimum output, as their entities will keep existing (consuming resources at load-time) but will never change (i.e., no useful feedback).
The forum probably needs you to have made a minimum number of useful posts, as an anti-spam measure.Cyber_Garret wrote:Hi again Narc, i can't write PM
Thanks! I'll wait a few more days, then, while you consider whether to change the item graphic and how.Cyber_Garret wrote:I thinking about better icon for item "Resource Monitor" later i show you another version.
-
- Fast Inserter
- Posts: 124
- Joined: Fri May 22, 2015 3:31 pm
- Contact:
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
Ah... Bob's Mods + RSO = Problems, then.Narc wrote:The more resource tiles (not sites, but actual in-world ore entities) you're tracking, the longer it'll take for Factorio to reload the save as it will need to re-establish the connection between the stored entity references and the ones existing in the world. There are some options I might try to mitigate this, but all it would do is shift the delay from load-time to later -- meaning you'd then have good reason complain that, for the first few minutes after loading a save, you get unpredictable lag spikes.SpeedDaemon wrote:I added YARM to an existing game (12.17), and can't load a save created with YARM active. The previous save (no YARM) is fine, but the current one gets to end of the loading progress bar and hangs.
UPDATE: I left it sit, and after about five minutes, it finally loaded... any ideas why it takes so long?[...]
The best workaround I can offer is to only keep sites you're actually mining, or are about to mine. Be wary of large-area ore patches (the bigger they are, the more impact they have). If using endless resources, remove sites that have reached minimum output, as their entities will keep existing (consuming resources at load-time) but will never change (i.e., no useful feedback).
I suppose I don't REALLY need to monitor that iron patch with 14 million units until it's closer to depletion... (although I suspect that once I get my rocket production up and running, a patch like that may only last about 4 hours)
You might add a note about this situation in the first post. That way people will know they can just wait it out and delete some monitors instead of thinking the save is toast.
- bushbaby1234
- Inserter
- Posts: 26
- Joined: Sat Aug 09, 2014 10:54 am
- Contact:
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
hello i was trying to figure out how to name a resource or combine oil spouts and all i can find on the monitor is the view and delete button. is there something im doing wrong? im playing multiplayer on a local connection and im the host
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
When you view a site, you can rename it. To merge different deposits (of the same resource!) into a single site, tap each deposit (e.g., oil spouts) in turn before the ten second countdown elapses and the site is created. The countdown resets every time you tap a new deposit. Site addition will be cancelled if you tap the ground, so be precise.bushbaby1234 wrote:hello i was trying to figure out how to name a resource or combine oil spouts and all i can find on the monitor is the view and delete button. is there something im doing wrong? im playing multiplayer on a local connection and im the host
- bushbaby1234
- Inserter
- Posts: 26
- Joined: Sat Aug 09, 2014 10:54 am
- Contact:
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7 (build 12)
Thanks thats exactly what i needed. loving the mod btwNarc wrote:When you view a site, you can rename it. To merge different deposits (of the same resource!) into a single site, tap each deposit (e.g., oil spouts) in turn before the ten second countdown elapses and the site is created. The countdown resets every time you tap a new deposit. Site addition will be cancelled if you tap the ground, so be precise.bushbaby1234 wrote:hello i was trying to figure out how to name a resource or combine oil spouts and all i can find on the monitor is the view and delete button. is there something im doing wrong? im playing multiplayer on a local connection and im the host
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7.15
Ladies and gentlemen, beloved followers and other interested parties, here is YARM v0.7.15 (direct download)!
Afforess continues showing awesomeness with #26 and #27 -- a major performance enhancement improving save/load times as well as site addition performance. Overall, this is beyond excellent.
There's also a nice improvement from @zorbathut: #25 allows endless resources to have a base value other than 0%, and thus just stay out of your way even when depleted. Personally, I tend to just remove endless sites when they deplete down to their base production, but having the ability to retain them for remote viewing is obviously a good thing.
Afforess continues showing awesomeness with #26 and #27 -- a major performance enhancement improving save/load times as well as site addition performance. Overall, this is beyond excellent.
There's also a nice improvement from @zorbathut: #25 allows endless resources to have a base value other than 0%, and thus just stay out of your way even when depleted. Personally, I tend to just remove endless sites when they deplete down to their base production, but having the ability to retain them for remote viewing is obviously a good thing.
-
- Filter Inserter
- Posts: 684
- Joined: Fri Sep 05, 2014 7:34 pm
- Contact:
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7.15
Narc has been busy.
Update 7.16 is now out:
https://github.com/narc0tiq/YARM/releas ... 0.7.16.zip
Changes:
Ensure force_data is available when it should be, even if it wasn't created at game init. Which it really should have been.
Update 7.16 is now out:
https://github.com/narc0tiq/YARM/releas ... 0.7.16.zip
Changes:
Ensure force_data is available when it should be, even if it wasn't created at game init. Which it really should have been.
Re: [MOD 0.12.12+] YARM (Yet Another Resource Monitor) v0.7.15
It's not quite an official release yet, as I'm still thinking of whether there's a way to avoid checking for that stuff every time, but if anyone had a problem (especially if you like to play multi-force games), that should fix it right up for you.Kane wrote:Narc has been busy.
Update 7.16 is now out:
https://github.com/narc0tiq/YARM/releas ... 0.7.16.zip
Changes:
Ensure force_data is available when it should be, even if it wasn't created at game init. Which it really should have been.