Page 116 of 194
Re: Bugs & FAQ
Posted: Mon Apr 15, 2019 3:54 am
by alercah
Per
this bug report, casting mono silicon with productivity enabled overproduces quartz crucibles (you can actually end up with more than you started!) because the game does not recognize the probabilistic output as a catalyst. After some testing, setting catalyst_amount to 1 in the recipe appears to fix this. I didn't look for other recipes that may be similarly affected.
Re: Bugs & FAQ
Posted: Fri Apr 19, 2019 9:09 pm
by MeduSalem
alercah wrote: ↑Mon Apr 15, 2019 3:54 am
Per
this bug report, casting mono silicon with productivity enabled overproduces quartz crucibles (you can actually end up with more than you started!) because the game does not recognize the probabilistic output as a catalyst. After some testing, setting catalyst_amount to 1 in the recipe appears to fix this. I didn't look for other recipes that may be similarly affected.
Ah good... I was already about to post the same... was having a look a few minutes ago into my Logistic network and baem... found 10000 Quartz crucibles... then found out that I heavily Productivity module'd the caster with Bob's modules and it seems like it is excess-generating crucibles like crazy rather than using them up.
I took out the Productivity modules for now until I have used them all up and then I will look again with a maximum of 20% Productivity... that should hold the balance... until there is a permanent solution/fix.
Re: Bugs & FAQ
Posted: Tue Apr 23, 2019 3:57 pm
by AmatorPhasma
Hi Angel,
I'd like to ask if you could include this little patch in your angel-functions.lua in the refining mod?
https://www.dropbox.com/s/fapobzujxbs4g ... patch?dl=0
It changed the void recipe generation to work with fluids/items with multilayer icons.
Re: Bugs & FAQ
Posted: Thu Apr 25, 2019 12:33 am
by moenbase
Hi, I love playing around with mods. Though with. the latest update of all mods. Playing 0.17.x. Using all Angels, Bobs and Pyanodon I get an error message for Angels mod.
It seems to work correctly with just bobs and Angels. But when I also add Py's mods I'm getting the following message:
https://imgshare.io/image/juDQ
Re: Bugs & FAQ
Posted: Thu Apr 25, 2019 1:36 am
by kingarthur
moenbase wrote: ↑Thu Apr 25, 2019 12:33 am
Hi, I love playing around with mods. Though with. the latest update of all mods. Playing 0.17.x. Using all Angels, Bobs and Pyanodon I get an error message for Angels mod.
It seems to work correctly with just bobs and Angels. But when I also add Py's mods I'm getting the following message:
https://imgshare.io/image/juDQ
Are you using pycoaltbaa? If so this is a known error and being worked on
Re: Bugs & FAQ
Posted: Thu Apr 25, 2019 6:35 am
by moenbase
hi thanks for the reply. Yea I'm using touched by an Angel as well indeed.
Great that it's being worked on
Should I keep an eye on the following topic to see if it has been fixed:
viewtopic.php?f=190&t=51967&start=640. ?
Re: Bugs & FAQ
Posted: Fri Apr 26, 2019 2:04 pm
by nothankyou
In my modpack when i add "angelspetrochem" , there are this erorr : " Error in asignID with name "nitric-acid" does not exist. Source: advanxed - processing unit.
Re: Bugs & FAQ
Posted: Fri Apr 26, 2019 2:08 pm
by Arch666Angel
nothankyou wrote: ↑Fri Apr 26, 2019 2:04 pm
In my modpack when i add "angelspetrochem" , there are this erorr : " Error in asignID with name "nitric-acid" does not exist. Source: advanxed - processing unit.
Could you post the full error message? Sound's like some other mod is expecting nictic-acid where it was changed to the petrochem fluid, just from the look at your modlist maybe circuit processing mod?
Re: Bugs & FAQ
Posted: Fri Apr 26, 2019 2:15 pm
by nothankyou
Arch666Angel wrote: ↑Fri Apr 26, 2019 2:08 pm
nothankyou wrote: ↑Fri Apr 26, 2019 2:04 pm
In my modpack when i add "angelspetrochem" , there are this erorr : " Error in asignID with name "nitric-acid" does not exist. Source: advanxed - processing unit.
Could you post the full error message? Sound's like some other mod is expecting nictic-acid where it was changed to the petrochem fluid, just from the look at your modlist maybe circuit processing mod?
This is the erorr:
- Cattura.PNG (16.44 KiB) Viewed 5376 times
Re: Bugs & FAQ
Posted: Fri Apr 26, 2019 2:38 pm
by Arch666Angel
As I said this is a problem inside the circuit processing mod, it either needs a check for the acid or make bobplates a dependency, because you have disabled it and it is required here.
Re: Bugs & FAQ
Posted: Fri Apr 26, 2019 2:47 pm
by nothankyou
Arch666Angel wrote: ↑Fri Apr 26, 2019 2:38 pm
As I said this is a problem inside the circuit processing mod, it either needs a check for the acid or make bobplates a dependency, because you have disabled it and it is required here.
Thanks , you have reason the problem was caused by disabilited bob plate
Re: Bugs & FAQ
Posted: Fri Apr 26, 2019 8:15 pm
by Arch666Angel
Added
Thanks for the hint/fix
Re: Bugs & FAQ
Posted: Fri Apr 26, 2019 9:16 pm
by AmatorPhasma
Arch666Angel wrote: ↑Fri Apr 26, 2019 8:15 pm
Added
Thanks for the hint/fix
No problem, and thank you
Then I'm able to see my fluid- and gas icons when I burn them or "clarify?" to the hell :>
Re: Bugs & FAQ
Posted: Sat Apr 27, 2019 4:58 pm
by otakushowboat
Potential bugs: 5 units of sodium hydroxide solution crafted per craft in an electrolyzer. Also, no apparent void recipe for this new fluid.
Is it intended for the newly added sodium hydroxide solution recipe in electrolyzers to produce 5 units of the fluid per 2 second craft? It seems incredibly low compared to other fluid production in general.
The consumers of it need 50 units per 4 second craft. At equal crafting speeds, it appears to be five electrolyzers worth of production of the sodium hydroxide solution per consumer building. The scale of production for the fluid and the sodium to feed the sodium carbonate in this process just seems to be a bit much compared to the previous processes consuming sodium hydroxide solids.
If it's intended, that's fine. I'll just build more to feed what I have. Just seems a bit off to me compared to what it's replacing. Not going to have any chlorine production issues any time soon, though!
Re: Bugs & FAQ
Posted: Sat Apr 27, 2019 9:44 pm
by TomatoSoup
Disabling the sulfuric acid requirement for infinite ores disables it even for ores that normally require fluid, like Uranium.
Re: Bugs & FAQ
Posted: Sun Apr 28, 2019 12:04 am
by MeduSalem
otakushowboat wrote: ↑Sat Apr 27, 2019 4:58 pm
Potential bugs: 5 units of sodium hydroxide solution crafted per craft in an electrolyzer. Also, no apparent void recipe for this new fluid.
Is it intended for the newly added sodium hydroxide solution recipe in electrolyzers to produce 5 units of the fluid per 2 second craft? It seems incredibly low compared to other fluid production in general.
The consumers of it need 50 units per 4 second craft. At equal crafting speeds, it appears to be five electrolyzers worth of production of the sodium hydroxide solution per consumer building. The scale of production for the fluid and the sodium to feed the sodium carbonate in this process just seems to be a bit much compared to the previous processes consuming sodium hydroxide solids.
If it's intended, that's fine. I'll just build more to feed what I have. Just seems a bit off to me compared to what it's replacing. Not going to have any chlorine production issues any time soon, though!
I agree there must be something off there balancing wise. Glad I am not the only one noticing this.
Even with bobs modules in the electrolyzer and beacons I can't seem to get the sodium hydroxide solution requiring machines fed, especially the sodium hypochlorite thing that is required in ridiculous amounts by the hydrazine/oxidizer production.
Tried to play around with it and either it's the electrolyzers not being able to keep up or the consumers requiring too much. Don't know.
Re: Bugs & FAQ
Posted: Sun Apr 28, 2019 1:50 am
by jrscrube
Hi Angel,
There appears to be a bug between the updated refining mod 10.9 and seablock 3.3.
Your updates to Petrochem, smelting and bio processing are working without a problem.
Error is as follows
Failed to load mods:__SeaBloack__/data-updates.lua:180: attempt to index field 'slag-processing' (a nil value) stack traceback:
__Seablock__/data-updates.lua:180: in main chunk
Mods to be disables:
-SeaBlock.
Thank you for your work on these great mods
I'll also post this to the seablock page.
Re: Bugs & FAQ
Posted: Thu May 02, 2019 11:37 am
by Trig90
Hi Angel,
I found a bug when placing a Algae Farm from a blueprint, but with fluid inputs switched around.
This is the simplest way I found to reproduce it.
1. Create a blueprint with the fluid inputs for the algae farm switched around.
2. Try to place the second algae farm.
3. You get an error that you can't mix fluids.
4. Rotate building so fluids match up and place it.
5. Go into details of placed building. -> Game Crash.
I don't know if this is reproducible in the base game since I couldn't get it to keep the recipe with a Chemical Plant.
Cheers and thanks for the awesome mods.
Re: Bugs & FAQ
Posted: Thu May 02, 2019 2:51 pm
by mrvn
Trig90 wrote: ↑Thu May 02, 2019 11:37 am
Hi Angel,
I found a bug when placing a Algae Farm from a blueprint, but with fluid inputs switched around.
This is the simplest way I found to reproduce it.
1. Create a blueprint with the fluid inputs for the algae farm switched around.
2. Try to place the second algae farm.
3. You get an error that you can't mix fluids.
4. Rotate building so fluids match up and place it.
5. Go into details of placed building. -> Game Crash.
I don't know if this is reproducible in the base game since I couldn't get it to keep the recipe with a Chemical Plant.
Cheers and thanks for the awesome mods.
I had something similar with a chemical plant. When blueprinting it would place the plant with a recipe for sulfuric acid connected to a pipe with mineralized water. Opening the chemical plant then crashes the game.
I think the vanilla game screwed something up with the fluid mix checks. Probably best to send a savegame as bugreport.
Re: Bugs & FAQ
Posted: Thu May 02, 2019 2:53 pm
by AmatorPhasma
mrvn wrote: ↑Thu May 02, 2019 2:51 pm
Trig90 wrote: ↑Thu May 02, 2019 11:37 am
Hi Angel,
I found a bug when placing a Algae Farm from a blueprint, but with fluid inputs switched around.
This is the simplest way I found to reproduce it.
1. Create a blueprint with the fluid inputs for the algae farm switched around.
2. Try to place the second algae farm.
3. You get an error that you can't mix fluids.
4. Rotate building so fluids match up and place it.
5. Go into details of placed building. -> Game Crash.
I don't know if this is reproducible in the base game since I couldn't get it to keep the recipe with a Chemical Plant.
Cheers and thanks for the awesome mods.
I had something similar with a chemical plant. When blueprinting it would place the plant with a recipe for sulfuric acid connected to a pipe with mineralized water. Opening the chemical plant then crashes the game.
I think the vanilla game screwed something up with the fluid mix checks. Probably best to send a savegame as bugreport.
sounds a bit similar to the bug I had in the past:
viewtopic.php?f=11&t=69395