Factorio Forums

www.factorio.com
https://forums.factorio.com/

[HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

https://forums.factorio.com/viewtopic.php?f=11&t=32740

Page 1 of 1

[HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Fri Sep 16, 2016 12:51 am
by MrGrim
I'm getting a reproducible crash right after laying down a rail blueprint. Links to the log and save are below. When you load the save you'll be holding a 90 degree turn rail blueprint. Rotate it once then place it so that the lights on the left of the blueprint are to the tile just left of the lights next to the power pole at the end of the current track. The game freezes within a few seconds of doing this.

I'm using one mod which is a version of "Auto Deploy Destroyers" that I patched for 0.14. I can reproduce the crash without the mod, however, but if you want the patched version used in the save it's also in the links below.

Thanks!

https://dl.dropboxusercontent.com/u/969 ... urrent.log
https://dl.dropboxusercontent.com/u/969 ... osave2.zip
https://dl.dropboxusercontent.com/u/969 ... _0.1.3.zip

Re: [HanziQ] [0.14.7] Crash After Laying Rail Blueprint

Posted: Fri Sep 16, 2016 6:42 am
by joon
I can confirm this. Have a Bp with rails which just worked for me but as soon as I rotate it and place it down, it will crash within a few seconds

Re: [HanziQ] [0.14.7] Crash After Laying Rail Blueprint

Posted: Fri Sep 16, 2016 9:56 am
by Cheekything
Can confirm I had the same issue will try to recreate as the second time I used my blueprint it seemed to be fine.

Code: Select all

Info ServerMultiplayerManager.cpp:745: MapTick(14982278) Serving map(C) for peer(2) size(9174487) crc(2152164534)
1787.264 Info ServerMultiplayerManager.cpp:625: mapTick(14982278) changing state from(InGameSavingMap) to(InGame)
1787.645 Info ServerMultiplayerManager.cpp:709: mapTick(14982302) received stateChanged peerID(2) oldState(ConnectedWaitingForMap) newState(ConnectedDownloadingMap)
1791.336 Info ServerMultiplayerManager.cpp:709: mapTick(14982524) received stateChanged peerID(2) oldState(ConnectedDownloadingMap) newState(ConnectedLoadingMap)
1792.312 Info ServerMultiplayerManager.cpp:709: mapTick(14982582) received stateChanged peerID(2) oldState(ConnectedLoadingMap) newState(TryingToCatchUp)
1793.563 Info ServerMultiplayerManager.cpp:709: mapTick(14982657) received stateChanged peerID(2) oldState(TryingToCatchUp) newState(WaitingForCommandToStartSendingTickClosures)
1793.568 Info GameActionHandler.cpp:2535: MapTick(14982657) processed PlayerJoinGame peerID(2) playerIndex(1) mode(connect)
1793.921 Info ServerMultiplayerManager.cpp:709: mapTick(14982679) received stateChanged peerID(2) oldState(WaitingForCommandToStartSendingTickClosures) newState(InGame)
1910.176 Error CrashHandler.cpp:210: Received SIGSEGV
Factorio crashed. Generating symbolized stacktrace, please wait ...
c:\cygwin64\tmp\factorio-5uendm\libraries\stackwalker\stackwalker.cpp (906): StackWalker::ShowCallstack
c:\cygwin64\tmp\factorio-5uendm\src\util\logger.cpp (332): Logger::writeStacktrace
c:\cygwin64\tmp\factorio-5uendm\src\util\logger.cpp (386): Logger::logStacktrace
c:\cygwin64\tmp\factorio-5uendm\src\util\crashhandler.cpp (105): CrashHandler::writeStackTrace
c:\cygwin64\tmp\factorio-5uendm\src\util\crashhandler.cpp (213): CrashHandler::SignalHandler
d:\th\minkernel\crts\ucrt\src\appcrt\misc\exception_filter.cpp (219): _seh_filter_exe
d:\th\minkernel\crts\ucrt\src\appcrt\startup\thread.cpp (117): `thread_start<unsigned int (__cdecl*)(void * __ptr64)>'::`1'::filt$0
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FF6B6751464)
00007FF6B6751464 (factorio): (filename not available): __C_specific_handler
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FFB4BA29AFD)
00007FFB4BA29AFD (ntdll): (filename not available): _chkstk
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FFB4B9B4FE9)
00007FFB4B9B4FE9 (ntdll): (filename not available): RtlImageNtHeaderEx
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FFB4BA28C0A)
00007FFB4BA28C0A (ntdll): (filename not available): KiUserExceptionDispatcher
c:\cygwin64\tmp\factorio-5uendm\src\rail\railpathfinder.cpp (130): RailPathFinder::findPath
c:\cygwin64\tmp\factorio-5uendm\src\rail\train.cpp (1193): Train::requestPath
c:\cygwin64\tmp\factorio-5uendm\src\rail\train.cpp (1862): Train::recalculatePath
c:\cygwin64\tmp\factorio-5uendm\src\rail\train.cpp (1017): Train::update
c:\cygwin64\tmp\factorio-5uendm\src\rail\trainmanager.cpp (161): TrainManager::update
c:\cygwin64\tmp\factorio-5uendm\src\map\map.cpp (1122): Map::update
c:\cygwin64\tmp\factorio-5uendm\src\game.cpp (144): Game::update
c:\cygwin64\tmp\factorio-5uendm\src\scenario\scenario.cpp (835): Scenario::update
c:\cygwin64\tmp\factorio-5uendm\src\mainloop.cpp (720): MainLoop::gameUpdateStep
c:\cygwin64\tmp\factorio-5uendm\src\mainloop.cpp (590): MainLoop::gameUpdateLoop
c:\cygwin64\tmp\factorio-5uendm\src\mainloop.cpp (280): MainLoop::mainLoopStepHeadless
c:\cygwin64\tmp\factorio-5uendm\src\mainloop.cpp (184): MainLoop::run
c:\cygwin64\tmp\factorio-5uendm\src\main.cpp (472): wmain
f:\dd\vctools\crt\vcstartup\src\startup\exe_common.inl (255): __scrt_common_main_seh
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FFB48E68102)
00007FFB48E68102 (KERNEL32): (filename not available): BaseThreadInitThunk
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FFB4B9DC5B4)
00007FFB4B9DC5B4 (ntdll): (filename not available): RtlUserThreadStart
1910.928 Error CrashHandler.cpp:106: Map tick at moment of crash: 14989654
1910.930 Error Util.cpp:77: Unexpected error occurred. If you're running the latest version of the game you can help us solve the problem by posting the contents of the log file on the Factorio forums.
Please also include the save file(s), any mods you may be using, and any steps you know of to reproduce the crash.
Finally managed to get this to happen but when I repeated the same events after a reload the crash didn't happen.

First time was with blueprints, the second with the rail planner. Both did not repeat under the same conditions (not exact but I did the same things).

Re: [HanziQ] [0.14.7] Crash After Laying Rail Blueprint

Posted: Fri Sep 16, 2016 11:11 am
by langoor
its happens when you try to extend your rail.. if there is signal from where you started to extend rail.. this will cause crash..

Re: [HanziQ] [0.14.7] Crash After Laying Rail Blueprint

Posted: Fri Sep 16, 2016 3:01 pm
by Ilirea
langoor wrote:its happens when you try to extend your rail.. if there is signal from where you started to extend rail.. this will cause crash..
I can also confirm this as I tried it a few times and the crash was reproducible.

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Fri Sep 16, 2016 10:47 pm
by Mokmo
I was laying rail using the shift-click rail planner, so i guess it almost counts as laying using blueprint...

Code: Select all

   0.003 2016-09-16 18:36:01; Factorio 0.14.7 (build 24699, win64, steam)
   0.003 Operating system: Windows 8.1 
   0.003 Program arguments: "C:\Program Files (x86)\Steam\steamapps\common\Factorio\bin\x64\Factorio.exe" 
   0.003 Read data path: C:/Program Files (x86)/Steam/steamapps/common/Factorio/data
   0.003 Write data path: C:/Program Files (x86)/Steam/steamapps/common/Factorio
   0.003 Binaries path: C:/Program Files (x86)/Steam/steamapps/common/Factorio/bin
   0.023 Display options: [FullScreen: true] [VSync: false] [UIScale: 80%] [MultiSampling: OFF] [Screen: 255]
   0.024 Available display adapters: 1
   0.024  [0]: \\.\DISPLAY1 - Intel(R) HD Graphics 5500 {0x05, [0,0], 1366x768, 32bit, 60Hz}
   0.024 Create display on adapter 0. Size 1280x720 at position [33, 6].
   0.070 Initialised Direct3D:[0] Intel(R) HD Graphics 5500; driver: igdumdim64.dll 10.18.15.4281
   0.072     Video memory size (dedicated video/dedicated system/shared system/available): 128/0/2560/2684 MB
   0.127 Device reset internal.
   0.133 Desktop composition is active.
   0.133 Graphics options: [Graphics quality: low] [Video memory usage: medium] [Light scale: 100%] [DXT: false]
   0.342 Loading mod core 0.0.0 (data.lua)
   0.355 Loading mod base 0.14.7 (data.lua)
   0.554 Loading mod FARL 0.6.0 (data.lua)
   0.650 Loading mod advanced-logistics-system 0.4.0 (data.lua)
   0.754 Loading mod bobinserters 0.14.0 (data.lua)
   0.865 Loading mod boblibrary 0.14.2 (data.lua)
   0.974 Loading mod Bottleneck 0.3.2 (data.lua)
   1.071 Loading mod Factorissimo 0.2.0 (data.lua)
   1.177 Loading mod RailTanker 1.4.0 (data.lua)
   1.263 Loading mod Warehousing 0.0.11 (data.lua)
   1.370 Loading mod bobassembly 0.14.0 (data.lua)
   1.479 Loading mod boblogistics 0.14.2 (data.lua)
   1.621 Loading mod bobmining 0.14.0 (data.lua)
   1.749 Loading mod bobpower 0.14.0 (data.lua)
   1.880 Loading mod bobtech 0.14.0 (data.lua)
   2.021 Loading mod FARL 0.6.0 (data-updates.lua)
   2.148 Loading mod bobinserters 0.14.0 (data-updates.lua)
   2.273 Loading mod bobassembly 0.14.0 (data-updates.lua)
   2.276 Script technology-functions.lua:155: Technology advanced-electronics-3 does not exist.
   2.419 Loading mod boblogistics 0.14.2 (data-updates.lua)
   2.425 Script technology-functions.lua:155: Technology aluminium-processing does not exist.
   2.425 Script technology-functions.lua:155: Technology titanium-processing does not exist.
   2.425 Script technology-functions.lua:155: Technology advanced-electronics-3 does not exist.
   2.425 Script technology-functions.lua:155: Technology ceramics does not exist.
   2.543 Loading mod bobmining 0.14.0 (data-updates.lua)
   2.678 Loading mod bobpower 0.14.0 (data-updates.lua)
   2.833 Loading mod bobtech 0.14.0 (data-updates.lua)
   2.959 Loading mod hacked-splitters 1.0.6 (data-updates.lua)
   3.089 Loading mod FARL 0.6.0 (data-final-fixes.lua)
   3.218 Loading mod RailTanker 1.4.0 (data-final-fixes.lua)
   3.372 Loading mod Squeak Through 1.1.4 (data-final-fixes.lua)
   3.480 Checksum for core: 1620335853
   3.480 Checksum for mod base: 330946690
   3.480 Checksum for mod FARL: 1093886923
   3.480 Checksum for mod advanced-logistics-system: 2163846892
   3.481 Checksum for mod bobinserters: 2966285250
   3.481 Checksum for mod boblibrary: 617495183
   3.481 Checksum for mod bobtechsave: 0
   3.481 Checksum for mod Bottleneck: 1776934153
   3.481 Checksum for mod Factorissimo: 708485668
   3.481 Checksum for mod RailTanker: 1260574978
   3.481 Checksum for mod Squeak Through: 3024636449
   3.481 Checksum for mod Warehousing: 3149064619
   3.481 Checksum for mod bobassembly: 3954254202
   3.481 Checksum for mod boblogistics: 3350834541
   3.481 Checksum for mod bobmining: 315145939
   3.481 Checksum for mod bobpower: 3291248052
   3.481 Checksum for mod bobtech: 4020887635
   3.481 Checksum for mod hacked-splitters: 801327488
   4.214 Info PlayerData.cpp:45: Local player-data.json available, timestamp 1473992767
   4.214 Info PlayerData.cpp:50: Cloud player-data.json available, timestamp 1473967788
   4.429 Initial atlas bitmap size is 8192
   4.431 Created atlas bitmap 8192x3499
   4.431 Created atlas bitmap 4096x1024
   4.432 Created atlas bitmap 4096x1052
  29.321 Sprites loaded
  29.321 Convert atlas 4096x1024 to: trilinear-filtering 
  29.425 Convert atlas 4096x1052 to: mipmap 
  30.008 Loading sounds...
  32.617 Custom inputs active: 7
  32.711 Factorio initialised
  44.173 Loading map C:\Program Files (x86)\Steam\steamapps\common\Factorio\saves\_autosave1.zip
  44.267 Info Scenario.cpp:148: Map version 0.14.7-0
  49.208 Checksum for script C:/Program Files (x86)/Steam/steamapps/common/Factorio/temp/currently-playing/control.lua: 900459546
  49.254 Checksum for script __FARL__/control.lua: 2419079015
  49.267 Checksum for script __advanced-logistics-system__/control.lua: 4246309343
  49.270 Checksum for script __bobinserters__/control.lua: 2307930931
  49.272 Checksum for script __bobtechsave__/control.lua: 868364910
  49.274 Checksum for script __Bottleneck__/control.lua: 1675732387
  49.279 Checksum for script __Factorissimo__/control.lua: 841786998
  49.282 Checksum for script __RailTanker__/control.lua: 2344758156
  49.283 Checksum for script __Warehousing__/control.lua: 4246273150
  49.285 Checksum for script __boblogistics__/control.lua: 1225455028
  49.287 Checksum for script __hacked-splitters__/control.lua: 398470431
 588.178 Error CrashHandler.cpp:135: Exception Code: c0000005, Address: 00007FF7419836B7
ModuleBase: 00007FF741510000, ImageSize: 01160000, RelativeAddress: 004736b7
 588.178 Error CrashHandler.cpp:145: Exception Context:
rax=0000002c3a60f0c0, rbx=0000002c18540420, rcx=0000000000000000,
rdx=0000002c5e5d79d0, rsi=00000000000000c0, rdi=0000002c15209f00,
rip=00007ff7419836b7, rsp=0000002c3a60ee30, rbp=0000002c3a60ef30,
 r8=0000002c89a94ca0,  r9=0000000000002426, r10=0000002c18540420,
r11=0000002c3a60ee10, r12=00007ff7425209d1, r13=0000002c88708270,
r14=00007ff742520900, r15=0000002c92c13a20
Factorio crashed. Generating symbolized stacktrace, please wait ...
c:\cygwin64\tmp\factorio-5uendm\libraries\stackwalker\stackwalker.cpp (906): StackWalker::ShowCallstack
c:\cygwin64\tmp\factorio-5uendm\src\util\logger.cpp (332): Logger::writeStacktrace
c:\cygwin64\tmp\factorio-5uendm\src\util\logger.cpp (386): Logger::logStacktrace
c:\cygwin64\tmp\factorio-5uendm\src\util\crashhandler.cpp (105): CrashHandler::writeStackTrace
c:\cygwin64\tmp\factorio-5uendm\src\util\crashhandler.cpp (155): CrashHandler::SehHandler
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FF8CEF51D52)
00007FF8CEF51D52 (KERNELBASE): (filename not available): UnhandledExceptionFilter
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FF8D1A5F133)
00007FF8D1A5F133 (ntdll): (filename not available): memset
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FF8D1A41D86)
00007FF8D1A41D86 (ntdll): (filename not available): _C_specific_handler
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FF8D1A533FD)
00007FF8D1A533FD (ntdll): (filename not available): _chkstk
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FF8D1A14847)
00007FF8D1A14847 (ntdll): (filename not available): RtlRaiseException
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FF8D1A5258A)
00007FF8D1A5258A (ntdll): (filename not available): KiUserExceptionDispatcher
c:\cygwin64\tmp\factorio-5uendm\src\rail\railpathfinder.cpp (130): RailPathFinder::findPath
c:\cygwin64\tmp\factorio-5uendm\src\rail\train.cpp (1193): Train::requestPath
c:\cygwin64\tmp\factorio-5uendm\src\rail\train.cpp (1862): Train::recalculatePath
c:\cygwin64\tmp\factorio-5uendm\src\rail\train.cpp (992): Train::update
c:\cygwin64\tmp\factorio-5uendm\src\rail\trainmanager.cpp (161): TrainManager::update
c:\cygwin64\tmp\factorio-5uendm\src\map\map.cpp (1122): Map::update
c:\cygwin64\tmp\factorio-5uendm\src\game.cpp (144): Game::update
c:\cygwin64\tmp\factorio-5uendm\src\scenario\scenario.cpp (835): Scenario::update
c:\cygwin64\tmp\factorio-5uendm\src\mainloop.cpp (720): MainLoop::gameUpdateStep
c:\cygwin64\tmp\factorio-5uendm\src\mainloop.cpp (590): MainLoop::gameUpdateLoop
c:\cygwin64\tmp\factorio-5uendm\src\util\workerthread.cpp (34): WorkerThread::loop
c:\program files (x86)\microsoft visual studio 14.0\vc\include\thr\xthread (247): std::_LaunchPad<std::unique_ptr<std::tuple<void (__cdecl WorkerThread::*)(void) __ptr64,WorkerThread * __ptr64>,std::default_delete<std::tuple<void (__cdecl WorkerThread::*)(void) __ptr64,WorkerThread * __ptr64> > > >::_Run
c:\program files (x86)\microsoft visual studio 14.0\vc\include\thr\xthread (210): std::_Pad::_Call_func
d:\th\minkernel\crts\ucrt\src\appcrt\startup\thread.cpp (115): thread_start<unsigned int (__cdecl*)(void * __ptr64)>
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FF8CF1513D2)
00007FF8CF1513D2 (KERNEL32): (filename not available): BaseThreadInitThunk
ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00007FF8D19D54E4)
00007FF8D19D54E4 (ntdll): (filename not available): RtlUserThreadStart
 589.292 Error CrashHandler.cpp:106: Map tick at moment of crash: 10290344
 589.292 Error Util.cpp:77: Unexpected error occurred. If you're running the latest version of the game you can help us solve the problem by posting the contents of the log file on the Factorio forums.
Please also include the save file(s), any mods you may be using, and any steps you know of to reproduce the crash.

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Sun Sep 18, 2016 6:33 am
by creepwood
I came across this too yesterday. I was extending a junction and 4/5 time this will make the client crash.

Here's a screen of when it happens Image

I also attached the log file

Edit: I tried laying down track from the other end instead which doesn't have a signal, it worked, but as soon as I placed a signal the client crashed again

Edit 2: If i stoppede all trains and put them in manual. I didn't encounter any error

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Sun Sep 18, 2016 12:58 pm
by thecatlover1996
Had a similiar crash for about three times when trying to create a T-split with a blueprint, while there were trains scheduled to drive over the already existing straight track. It seemed to me, that on the moment the signals were placed (i.e. new rail segments were created), the crash occured.

The crash occured on the server and on both clients. Included the log for my client, I'll quickly boot the server to get the server log as well.

Btw, the logs are relatively short, since this was the log after the third crash and we just kept restarting the server and trying again :P
After that, we found a temporary work-around: when we halted all trains, then placed the T-split, then let the trains run again, no crash occurred.

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Sun Sep 18, 2016 1:03 pm
by thecatlover1996
Hereby the log for the server at the time of the crash.

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Sun Sep 18, 2016 3:19 pm
by adamcharnock
I've encountered this bug too:

* Running 0.14.7
* Crashes on both server and local game
* Log & save attached

To reproduce: Extend the train platform (next to where I am stood, user adamcharnock). The game should then crash.

Thank you!

Adam

EDIT: If that doesn't cause the crash then try to attach the platforms to the rail above them. Once the rightmost train departs it definitely crashes for me.

EDIT2: I'm experiencing the same as creepwood. If I lay the track from the other end, then I don't get a crash. However, the game then crashes as soon as I place a signal. Stopping all the trains beforehand avoids the crash. Starting the trains again afterwards does not result in a subsequent crash.

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Sun Sep 18, 2016 4:25 pm
by DutchJer
i had the same thing, twice today during the stream.

both were on the same line.

i can share the last savegame i have of the last one, but it's big, so let me know if you need it.

my logfile is here: http://pastebin.com/QrUSGaEM & http://pastebin.com/hNGxejJd

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Mon Sep 19, 2016 12:35 am
by Helfima
i confirm it crash every time i can't play more than 1h

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Mon Sep 19, 2016 7:20 am
by MrGrim
Ya this one appears to be unpredictable. I'm experiencing several crashes per session and specifics of signal placement or how the rail is being extended doesn't seem to matter all that much. I could try to hold on to saves each time it happens if you don't already have plenty. :)

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Mon Sep 19, 2016 9:29 am
by Zeno
Experiencing this also.
At first i was running around, doing all sorts of random things setting up a train stop blueprint, then it crashed:
First
The next time i loaded the save i immediately placed the station blueprint and it crashed:
Second
I've tried this for a third time and for a while it seemed stable, but then surprise, RailPathFinder::findPath happened again.

How to reproduce the error:
The autosave probably has the car inventory open to start with. Just open the car if it's not, and take out 2 concrete and 1 hazard concrete to your inventory that's needed to finish the "train station" blueprint you'll place to trigger the error.
Select the blueprint book and scroll through until you see the train station. Rotate it so the side branch is facing left (west) and locate the station so it's matching the existing track (the top and bottom most signals should overlay the existing signals) and deploy it there; the construction robots should start working on it.
During this time the iron ore train that's on the loop should probably have left the station and pass by if you were slow. This might or might not be the relevant train that triggers the error; there is an ammo train and an oil barrel train running elsewhere.
Once the station is built, wait a while; it should crash eventually... like it has the last 3 times i've tried it. Usually within a minute or two.
Edit - Did i say it might be the train? I meant it is the train. It can also crash immediately during train station blueprint construction if you time it correctly, just as the ore train is leaving the station and the proper tracks are placed by robot.

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Mon Sep 19, 2016 9:58 am
by kovarex
Fixed for 0.14.8

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Mon Sep 19, 2016 2:11 pm
by MrGrim
kovarex wrote:Fixed for 0.14.8
<3

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Tue Sep 20, 2016 8:01 pm
by aober93
Damn, just lost my game due this, and now we got an update :shock:

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Thu Sep 22, 2016 5:19 am
by Gouada
Hey MrGrim,
This is off topic but could you send me the updated auto-deploy destroyers mod? Been looking for a .14 version for a while.
Many thanks!

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Thu Sep 22, 2016 11:11 am
by slindenau
Gouada wrote:Hey MrGrim,
This is off topic but could you send me the updated auto-deploy destroyers mod? Been looking for a .14 version for a while.
Many thanks!
I released the 0.14 version a little while ago :).

Re: [HanziQ] [14.7] Crash when changing rail on: "RailPathFinder::findPath"

Posted: Fri Sep 23, 2016 1:13 am
by Gouada
slindenau wrote:
Gouada wrote:Hey MrGrim,
This is off topic but could you send me the updated auto-deploy destroyers mod? Been looking for a .14 version for a while.
Many thanks!
I released the 0.14 version a little while ago :).
Perfect thanks!
All times are UTC
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited